Rplidar Camera

This repo integrates slamtec rplidar LIDARS to be configured as a camera with Viam's RDK.

It has been tested on the following rplidars:

• RPLIDAR A1
• RPLIDAR A3
• RPLIDAR S1

Build and Run

To use this module, follow these instructions to add a module from the Viam Registry and select the viam:lidar:rplidar model from the rplidar module.

Requirements

The rplidar module is distributed as an AppImage. AppImages require FUSE version 2 to run. See FUSE troubleshooting for instructions on installing FUSE 2 on your system if it is not already installed.

Currently, the rplidar module supports the Linux platform only.

Configure your Rplidar

Note

Before configuring your camera, you must create a robot.

Navigate to the Config tab of your robot’s page in the Viam app. Click on the Components subtab and click Create component. Select the camera type, then select the lidar:rplidar model. Enter a name for your camera and click Create.

Note

For more information, see Configure a Robot.

To save your changes, click Save config at the bottom of the page. Check the Logs tab of your robot in the Viam app to make sure your RPlidar has connected and no errors are being raised.

Attributes

No attributes are available for a lidar:rplidar camera.

Build and Run locally

If you don't want to load the model from the registry, for example because you are actively changing its functionality, you can install it locally. Follow these instructions to configure a local module on your machine.

1. Install the rplidar module:
   • OSx:

     brew tap viamrobotics/brews && brew install rplidar-module

   • Linux AArch64 (ARM64) (e.g., on an RPI):

     sudo curl -o /usr/local/bin/rplidar-module http://packages.viam.com/apps/rplidar/rplidar-module-latest-aarch64.AppImage
     sudo chmod a+rx /usr/local/bin/rplidar-module

   • Linux x86_64:

     sudo curl -o /usr/local/bin/rplidar-module http://packages.viam.com/apps/rplidar/rplidar-module-latest-x86_64.AppImage
     sudo chmod a+rx /usr/local/bin/rplidar-module

2. Run the RDK web server using one of the example config files module/sample_osx_m1.json, module/sample_osx_x86.json or module/sample_linux.json, depending on your operating system and processor.

Development

Dependencies

Install the following list of dependencies:

• Golang
• make, swig, jpeg, pkg-config:
  • MacOS: brew install make swig pkg-config jpeg
  • Linux: apt update && apt install -y make swig libjpeg-dev pkg-config

Build & run rplidar as a modular component

1. Build the module: make build-module
2. Run the RDK web server using one of the example config files:
   • MacOS: modules/sample_osx.json
   • Linux: modules/sample_linux.json

Linting

make lint

(Optional) Using Canon Images

If desired, Viam's canon tool can be used to create a docker container to build arm64 or amd64 binaries of the SLAM server. The canon tool can be installed by running the following command:

go install github.com/viamrobotics/canon@latest

And then by running one of the following commands in the rplidar repository to create the container:

canon -arch arm64

canon -arch amd64

These containers are set to persist between sessions via the persistent parameter in the .canon.yaml file located in the root of rplidar. More details regarding the use of Viam's canon tool can be found here.