Active Control Loading for Flight Simulator.
- Prosim-AR 737
- Flight Simulator 2020 or P3D v4+
- ACL software
- AC Servo Motors
- Arduino Mega
- RS485 Controller Hardware installation
| Axis | Feature | Status |
|---|---|---|
| Pitch Axis | ||
| Self-centering | Complete | |
| Load increases when hydraulics are not available | Complete | |
| Load increases with airspeed | Complete | |
| Load changes based on aft/fwrd position (v1) | Complete | |
| Fwd Load increases when approaching a stall | Complete | |
| Autopilot moves control column | Complete | |
| Autopilot disengage override by moving the control | Complete | |
| Center calibration when starting the sim | Complete | |
| More accurate Load changes based on pitch position | TODO | |
| Roll Axis | ||
| Self-centering | Complete | |
| Load increased when hydraulics are not available | Complete | |
| Autopilot moves control wheel | Complete | |
| Autopilot disengage override by moving the control | Complete | |
| Trim Adjustment moves Control wheel | Complete | |
| Center calibration when starting the sim | Complete | |
| Rudder Axis | ||
| Self-centering | Complete | |
| Load increased when hydraulics are not available | Complete | |
| Trim Adjustment moves rudders | Complete | |
| Center calibration when starting the sim | Complete | |
| Tiller | ||
| Self-centering | Complete | |
| Load increases when hydraulics are not available | Complete | |
| Load decreases with higher ground speed | Complete | |
| Center calibration when starting the sim | Complete |