In this program I used the esp32, a lcd 16*2 display and the connection with the thinger.io application. I programmed the microcontroller to take readings from the dht11 sensor and upload them to the thinger.io platform I also used the lcd screen to make a local representation of the readings I got from the sensor. I I used three LEDs so that they could show the temperature variation based on their color (1 red ,1 greeen ,1 blue. if the temperature is betweeen 20-30 degrees celsious the green will power on.if the temperature is under 20 degrees celsious theblue led will power on. an if the temperature is over 30 degrees celsious the red led will power on ). Μoreover, I used an extra led to remotely control it through the thinger.io platform
vlsblls/ESP32-temperature-and-humidity-measurements-by-DHT11-
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
About
esp32 temperature and humidity measurements in real time and connection with thinger.io
Resources
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published