ESP32-CAM-Video-Telegram
- Runs on ESP32-CAM AI-Thinker, stores video in SPIFFS - No need SD-Card!
- Record avi video on ESP32-CAM and send to Telegram on PIR Sensor / Microwave Radar Motion Sensor RCWL-0516 (GPIO13) event or request
- WiFi manager to configure wifi credentials and telegram ID & AIP token by a PushButton GPIO12 (>=3sec), 1s = soft reboot
- Auto reconnect / reboot if wifi disconnected then enter config portal (AP mode) for 2 minutes
- Fast blink - In config portal AP mode
Telegram commands:
- /start
- /photo - capture and send a photo
- /flash - toggle flash led
- /caption - photo with caption
- /clip - send a photo followed by a short video clip AVI
- /enable - enable pir
- /disable - disable pir
- /enavi - enable video capture
- /disavi - disable video capture
- /fast - 25fps play 0.5x speed
- /med - 8fps play 1x speed
- /slow - 2fps play 5x speed
- /status
- /reboot
Default settings:
- 15 second video AVI @ VGA
- Frame_interval 125ms, play at real time 1x speed
- PIR & AVI is always re-enabled on reboot