Increase/Decrease Pan/Tilt Speed not immediately effective

[vwout]

Yesterday, when using the PTZOptics mode, I found that the "Increase Pan/Tilt Speed" adn "Decrease Pan/Tilt Speed"(A) did not take effect immediately on the camera. I need to press the refresh button(C) in the lower left corner to take effect, but the value here has changed（B）.

Originally posted by @PoWeR-Ding in #8 (comment)

[vwout]

The speed increase/decrease shortcuts actually do have immediate effect. This is only shown in the settings after reload - this is a limitation of OBS.
The speed however was only applied at the first hotkey use. Changing the speed afterwards has no effect until the plugin is reloaded. This bug is resolved in 33c621a.

[PoWeR-Ding]

OK, copy. I will test as soon as possible

[PoWeR-Ding]

Hello, I can't control the camera after updating the script.

[PoWeR-Ding]

Now, after changing the speed, it will take effect immediately. But the up, down, left and right directions cannot be controlled.

[PoWeR-Ding]

"Zoom In" and "Zoom Out" are also normal. √

[vwout]

Sorry about that; my fix was too quick (not properly tested). Should be resolved now.

[PoWeR-Ding]

Never mind, I will continue to test😂😂

[PoWeR-Ding]

Script Log.txt

This time, "Zoom In" and "Zoom Out" will not take effect. 😣 😣 😣 😣

[vwout]

Now it should finally work - without breaking stuff.
This finally made me start on writing unit tests for the OBS plugin script as well ...

[PoWeR-Ding]

Thanks for the patient repair. I will continue to test it.

[PoWeR-Ding]

Good morning, vwut

I tested it again and there was no problem.

Thanks again.