Merge pull request #7285 from wazuh/7277-replace-wazuh.yml-localhost-…

…to-127.0.0.1

Change localhost to 127.0.0.1 in wazuh.yml

CHANGELOG.md

@@ -43,7 +43,7 @@ All notable changes to this project will be documented in this file.
 - Updated the ``user-manual/reference/unattended-installation`` section. ([#7162](https://github.com/wazuh/wazuh-documentation/pull/7162))
 - Changed Docker version requirement to ``6.0.0``. ([#7133](https://github.com/wazuh/wazuh-documentation/pull/7133))
 - Updated the Vulnerability detection PoC. ([#7215](https://github.com/wazuh/wazuh-documentation/pull/7215))
-- Replaced ``localhost`` occurrences in the Offline installation guide and the Wazuh dashboard step-by-step installation guide. ([#7234](https://github.com/wazuh/wazuh-documentation/pull/7234))
+- Replaced ``localhost`` occurrences. ([#7234](https://github.com/wazuh/wazuh-documentation/pull/7234)) ([#7285](https://github.com/wazuh/wazuh-documentation/pull/7285))
 
 ### Fixed
 

source/user-manual/upscaling/adding-server-node.rst

@@ -623,7 +623,7 @@ Install and configure filebeat
 
 #. Edit the ``/etc/filebeat/filebeat.yml`` configuration file and replace the following value:
 
-   -  ``hosts`` which represents the list of Wazuh indexer nodes to connect to. You can use either IP addresses or hostnames. By default, the host is set to localhost ``hosts: ["127.0.0.1:9200"]``. Replace it with your Wazuh indexer IP address accordingly.
+   -  ``hosts`` which represents the list of Wazuh indexer nodes to connect to. You can use either IP addresses or hostnames. By default, the host is set to 127.0.0.1 ``hosts: ["127.0.0.1:9200"]``. Replace it with your Wazuh indexer IP address accordingly.
 
       If you have more than one Wazuh indexer node, you can separate the addresses using commas. For example, ``hosts: ["10.0.0.1:9200", "10.0.0.2:9200", "10.0.0.3:9200"]``:
 

source/user-manual/user-administration/ldap.rst

@@ -151,16 +151,16 @@ The ``auhtc`` section of the Wazuh indexer security configuration file handles a
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.6.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -209,16 +209,16 @@ Follow these steps to create a new role mapping and grant administrator permissi
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.6.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -240,7 +240,7 @@ Follow these steps to create a new role mapping and grant administrator permissi
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"
@@ -306,7 +306,7 @@ Setup read-only role
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"

source/user-manual/user-administration/password-management.rst

@@ -240,7 +240,7 @@ Follow the instructions below to change the passwords for all the Wazuh indexer
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"

source/user-manual/user-administration/single-sign-on/administrator/google.rst

@@ -171,17 +171,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -215,17 +215,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output
             
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -250,7 +250,7 @@ Wazuh dashboard configuration
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"

source/user-manual/user-administration/single-sign-on/administrator/jumpcloud.rst

@@ -207,17 +207,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
       
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -251,17 +251,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv      
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv      
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -286,7 +286,7 @@ Wazuh dashboard configuration
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"

source/user-manual/user-administration/single-sign-on/administrator/keycloak.rst

@@ -283,17 +283,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -326,16 +326,16 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
 The command output must be similar to the following:
 
    .. code-block:: console
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -360,7 +360,7 @@ Wazuh dashboard configuration
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"

source/user-manual/user-administration/single-sign-on/administrator/microsoft-entra-id.rst

@@ -204,17 +204,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/config.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -248,17 +248,17 @@ Edit the Wazuh indexer security configuration files. We recommend that you back
 
    .. code-block:: console
 
-      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h localhost -nhnv
+      # export JAVA_HOME=/usr/share/wazuh-indexer/jdk/ && bash /usr/share/wazuh-indexer/plugins/opensearch-security/tools/securityadmin.sh -f /etc/wazuh-indexer/opensearch-security/roles_mapping.yml -icl -key /etc/wazuh-indexer/certs/admin-key.pem -cert /etc/wazuh-indexer/certs/admin.pem -cacert /etc/wazuh-indexer/certs/root-ca.pem -h 127.0.0.1 -nhnv
 
-   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses localhost, set your Wazuh indexer address if necessary.
+   The ``-h`` flag specifies the hostname or the IP address of the Wazuh indexer node. Note that this command uses 127.0.0.1, set your Wazuh indexer address if necessary.
 
    The command output must be similar to the following:
 
    .. code-block:: console
       :class: output        
 
       Security Admin v7
-      Will connect to localhost:9200 ... done
+      Will connect to 127.0.0.1:9200 ... done
       Connected as "CN=admin,OU=Wazuh,O=Wazuh,L=California,C=US"
       OpenSearch Version: 2.10.0
       Contacting opensearch cluster 'opensearch' and wait for YELLOW clusterstate ...
@@ -283,7 +283,7 @@ Wazuh dashboard configuration
 
       hosts:
         - default:
-            url: https://localhost
+            url: https://127.0.0.1
             port: 55000
             username: wazuh-wui
             password: "<wazuh-wui-password>"