-
Notifications
You must be signed in to change notification settings - Fork 96
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
其它操作系统 #29
Comments
@99memory 跟ubuntu大同小异吧,没太大区别呀~ |
我在centos7里面试了几遍了,都不太行。那俺再研究下
stdy
***@***.***
…------------------ 原始邮件 ------------------
发件人: ***@***.***>;
发送时间: 2022年7月19日(星期二) 下午5:53
收件人: ***@***.***>;
抄送: ***@***.***>; ***@***.***>;
主题: Re: [weijiang1994/Blogin] 其它操作系统 (Issue #29)
@99memory 跟ubuntu大同小异吧,没太大区别呀~
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
@99memory 可以贴一下错误详情 |
好滴,好滴。我现在把之前系统重装了一遍试试,有问题可以再接着请教嘛?
stdy
***@***.***
…------------------ 原始邮件 ------------------
发件人: ***@***.***>;
发送时间: 2022年7月20日(星期三) 晚上8:50
收件人: ***@***.***>;
抄送: ***@***.***>; ***@***.***>;
主题: Re: [weijiang1994/Blogin] 其它操作系统 (Issue #29)
@99memory 可以贴一下错误详情
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
@99memory 可以的 |
这里显示导入这个redis找不到我在网上搜索了两种方法都导入成功了,但是还是会显示这个
(16条消息) PYTHON——ImportError: No module named redis_reidlv的博客-CSDN博客
这个是教程
还有上面的报错:
While importing "wsgi", an ImportError was raised
我看网上说是:存在循环引入,可是我确实没发现在哪里有这个问题
就可以请教下吗?
谢谢
stdy
***@***.***
…------------------ 原始邮件 ------------------
发件人: ***@***.***>;
发送时间: 2022年7月20日(星期三) 晚上9:09
收件人: ***@***.***>;
抄送: ***@***.***>; ***@***.***>;
主题: Re: [weijiang1994/Blogin] 其它操作系统 (Issue #29)
@99memory 可以的
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
@99memory 你到github上回复吧,你邮件回复的看不清楚。 |
@99memory 应该不是循环导入错误,应该是有些包没有安装。 |
#Q1error: command 'gcc' failed with exit status 1
#Q2 Error: No such command 'initdb'. Error: No such command 'initdb'.
#Q3Error: No such command 'admin'. `* Tip: There are .env or .flaskenv files present. Do "pip install python-dotenv" to use them.
#Q4 Error: While importing "wsgi", an ImportError was raised: |
@99memory pip install redis python-dotenv |
@99memory yum install python3-devel,需要安装Python3的,这博客系统是依赖Python3。 |
@weijiang1994 |
不过显然这个host和port是打不开的,并不能运行。所以就想看看是不是我的端口号和地址错了 |
@99memory 你这样肯定无法访问的,第一,127是本地地址要用0.0.0.0去启动才可以访问,只能服务器本地访问,第二,5000端口应该是被防火墙禁用了,需要开启,同时在安全策略上配置一下5000端口的出入找规则。 |
我这个本地的话是在pycharm上开发的flask项目,它里面有flask的运行配置。不是通过命令行运行的。 |
没用过宝塔不太清楚怎么修改😂 |
博主可以出一个centos7的安装教程嘛?
The text was updated successfully, but these errors were encountered: