Prerequisites
-
Please note you need probably to download and install drivers for your board's USB-TO-SERIAL adapter for Windows and Mac OSX versions. The GNU/Linux version usually doesn't need any drivers. This drivers are required to connect to your board through a serial port connection.
Board WHITECAT ESP32 N1 ESP32 CORE ESP32 THING -
For Linux, the currently logged user should have read and write access the sUSB-TO-SERIAL device. On most Linux distributions, this is done by adding the user to dialout group with the following command:
$ sudo usermod -a -G dialout $USER
-
Install the Lua RTOS firmware on your board. Follow this instructions for it.
-
Install The Whitecat Create Agent. Follow this instructions for it.
-
Make sure that The Whitecat Create Agent is running. Remember that in Ubuntu you must to start the agent manually after it's installation.
The Whitecat IDE is free for you, but funds are required for make it possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.
