Broadcom Bluetooth firmware for Linux kernel
This package intentended to provide firmware of Broadcom WIDCOMM® Bluetooth devices (including BCM20702, BCM20703, BCM43142 chipsets and other) for Linux kernel. Since February 2017, Broadcom ships their drivers directly to Windows Update service. They can be downloaded here.
Detection and Installation
When you inserting Broadcom Bluetooth device you prefered Linux distribution may not load it properly:
Bluetooth: hci1: BCM: chip id 63 Bluetooth: hci1: BCM20702A Bluetooth: hci1: BCM20702A1 (001.002.014) build 0000 bluetooth hci1: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2 Bluetooth: hci1: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found
As you can see, you need
.hcd file to
/lib/firmware/brcm. After inserting Broadcom
Bluetooth device you will see that firmware successfully loaded:
Bluetooth: hci1: BCM: chip id 63 Bluetooth: hci1: BCM20702A Bluetooth: hci1: BCM20702A1 (001.002.014) build 0000 Bluetooth: hci1: BCM20702A1 (001.002.014) build 1467 Bluetooth: hci1: Broadcom Bluetooth Device
Congratulations, now your bluetooth device successfully loaded. Now go to Bluez for futher configuration.
Incorrect names for devices
There may be incorrect naming between presented firmware name and name
requested from Linux kernel. For example, system may request
but actually this is
BCM4356A2-13d3-3485.hcd. This is happens because
incorrect naming in Linux kernel. Just rename file to name that need to
kernel. Here quick naming convertion:
|Original name||Requested by Linux|
Notes about combined WiFi+Bluetooth devices
Some Bluetooth controller (for example, BCM4354 and BCM4356) are integrated to WiFi chipset (this can be BCM43XX 802.11ac Wireless Network Adapter or just simple generic Broadcom PCIE Wireless). These devices requires two kinds of firmware - first for WiFi, and second for Bluetooth. Without WiFi firmware Bluetooth will not initialize and will not work properly. Firmware for WiFi already included to kernel, but you may need to do additional work to place correct NVRAM.
Here example how it can looks (note about
loading - this is your customized NVRAM):
usbcore: registered new interface driver brcmfmac brcmfmac 0000:02:00.0: firmware: direct-loading firmware brcm/brcmfmac4356-pcie.bin brcmfmac 0000:02:00.0: firmware: direct-loading firmware brcm/brcmfmac4356-pcie.txt Bluetooth: hci0: BCM: chip id 101 Bluetooth: hci0: N360-11 Bluetooth: hci0: BCM4354A2 (001.003.015) build 0000 bluetooth hci0: firmware: direct-loading firmware brcm/BCM4354A2-13d3-3485.hcd
Firmware files are licensed under Broadcom WIDCOMM Bluetooth Software License Agreement. Other parts of project are licensed under standard MIT license.
See DEVICES file.