Open ArdBir 2012-2016

##Version 2.8.3-Wiz ##modded fromVersion 2.8.3-RC

####Source, PCB, Manual (English, Italian, Russian)

####Avaible Language: Italian, English, Spanish, Portuguese, Russian (20x4), Norwegian (20x4).

####Compiled on Arduine IDE v1.6.5.

brauduino semi automated single vessel RIMS created by s.mathison Copyright (C) 2012 Stephen Mathison

###Modified by wizbrewery.wordpress.com (2016)

• Added ONEWIRE bus to support second temperaure probe

• Amended display to show reding of second temperature probe for both auto and manual

• Auto shows temp readings to 2 decimal place vertically aligned

• Manual shows temp readings to 1 dp side by side

• Implemented new GetTemperature() which takes probe i2c address as an argument, so that it can be called for each probe

• Currently implemented so that you have to enter your probes specific i2c address

• To do .. fix 1 decimal place for manual mode

• IOT implementation for connection to thingspeak.com

• Incorporate second temp probe into control. Any ideas on a plan to do this?

###Modified BY Oddvar S. Næss (2014)

• Ported to Arduino Mega 2650
• Implemented I2C Serial Display (use I2C Scanner sketch to determend I2C address)
• Added PCB_OSN.h Library for prototyping (not an actual circutboard)
• Added 4 status LEDs (Heater, Pump, 12Vdc, 220Vac ON/OFF)
• Added 1 additional pump for circulation (work in progress)
• Added 1 manual on/off button for circulation pump (work in progress)
• Added 1 additional temperature sensor for monitoring (work in progress)

###Modified by Mike Wilson

• Added INPUT_PULLUP to button inputs
• swapped I/O ports for Buzz and Pump
• changed to faherenheit
• added heat and pump (H and P) indicators to the LCD
• turned off pump during boil stage
• added direct output% control and display during boil
• saved boil heat % in EEPROM
• 2v5 fixed hop addition when hoptime == boiltime
• changed boil stage temp to 201 deg F.

###Modified by Massimo Nevi (2014/2015)

• Added Buzzer Modulation (NumBeep, Period)
• Added Stage CountDown in Automatic Mode
• Added Stage Watch in Manual Mode
• Modified Max Number of Hops (10)
• Modified stage Wait in Active Pause (PID Control On)
• Modified H e P indicator for ON-OFF and Active-Disactive Modulation
• Added Some Control Parameter in Configuration Menu
• Added Temp Pump Stop in Manual Mode
• Dual Scale Temp (°C-°F)
• Reorganized EEPROM
• Reorganized Configuration
• Added Delayed Start
• Added Alert before Mash In
• Jump Step whit Button Press in Automatic Mode
• Added Cooling Procedure
• Added Whirlpool Procedure

Added more configuration on PID Menu

• Added Use Gas section

• Set Histeresy for Gas Use

• Set Calibration Temp

• Modified PID on BOIL

• Added Second Menu Configuration

  • Set Scale Temp (°C-°F)
  • Set Location of Temp Sensor
  • Set Temp of Boil (°C-°F)
  • Set Set Time Pump Cycle and Time Rest
  • Set Pump ON-OFF before Mash In
  • Set Pump ON-OFF during Mash
  • Set Pump ON-OFF at Mash Out
  • Set Pump ON-OFF at Boil
  • Set Temp Pump Stop (°C-°F)
  • Set Skip Pause at Add Malt
  • Set Skip Pause at Remove Malt
  • Set Skip Pause at Iodine Test
  • Set Time Max Iodine Test
  • Set Manage Whirlpool

• Reorganized Automation

  • Removed Number of Stages Setting
  • Fixed Name of Stages (8)
  • Dual A-Amylase Stage
  • Correct Mash In Stage
  • Auto Mash Design
  • Correct Time Reset of Pump
  • Added Iodine Test (Active Pause)
  • Added WHIRLPOOL control
  • Added COOLING control

• Stage Managing

  • Load Stage Set
  • Save Stage Set
  • Delete Stage Set
  • Initialize EEPROM

• LCD 16x2 wiew

• LCD 20x4 wiew

• ####Avaible Language:

• Italian Language (Both)

• English Language (Both)

• Spanish Language (Both)

• Portuguese Language (Both)

• Russian Language (20x4)

• Norwegian Language (20x4)

compiled on Arduino V1.6