24.7.2

1. 取消 x2apic 的支持 (由于 VMware 系列和部分旧平台对 x2apic 存在兼容性问题, 目前无明确的判断条件，因此暂时全线取消, from 24.6.9).
2. 取消 "启动后关闭显示器: true/false" 功能 (由于 intel 4代和 nvdia 存在兼容性问题(仅用户反馈), 目前也无明确的判断条件, 因此暂时全线取消, from 24.7.0).
3. 更新 r8168,r8125,r8126 驱动 (移除 rss 日志, 打开 wol 功能).
4. 更新 hdddb.
5. 其他优化.

---

1. Disable x2apic support (due to VMware series and some old platforms have compatibility issues, there is no clear judgment condition, so temporarily all cancel, from 24.6.9).
2. Disable "Power off display after boot: true/false" function (due to intel 4th and nvdia have compatibility issues(only user feedback), there is no clear judgment condition, so temporarily all cancel, from 24.7.0).
3. Update r8168,r8125,r8126 drivers (remove rss logs, enable wol).
4. Update hdddb.
5. Others.

Full Changelog: 24.7.1...24.7.2

24.7.1

1. 修复 非DT型号报错 "SYNO_CTRL_HDD_POWERON.cold+0x1f/0x29"
2. 修复 某些环境 无限重启.
3. 修复 acpid addon.
4. 添加 自定义 "驱动探测黑名单" 功能(modules menu, Defaults: "evdug,cdc_ether").
5. 增加 串口(PCIE/USB 扩展)终端(cmdline 添加 "getty=ttyWCH0,115200n8").
6. 其他优化.

---

1. FIx non-DT model error "SYNO_CTRL_HDD_POWERON.cold+0x1f/0x29"
2. Fix the infinite restart problem in some environments.
3. Fix acpid addon.
4. Add "modprobe blacklist" function (modules menu, Defaults: "evdug,cdc_ether").
5. Add serial port (PCIE/USB expansion) terminal (cmdline added "getty=ttyWCH0,115200n8").
6. Others.

Full Changelog: 24.7.0...24.7.1

24.7.0

1. 重写 x2apic 的屏蔽逻辑, 避免每次升级 RR 都需要重启两次(from 24.6.9).
2. 添加 "Power off display after boot: true/false" 功能, 自行选择启动后是否使显示器断电.
3. 修复大量菜单中的小错误.
4. 修复 e1000e 对 I-219 LM20~LM29/V20~V29 版本的兼容(only epyc7002).
5. 修复 upadenotify 插件报错 "bash: 1: command not found" 的问题 (之前版本以管理员账户保存一次 "RR-UpdateNotify" 计划任务既可正常).
6. 更新插件依赖.
7. 增加 对 XEN 的支持(未完待续).
8. 其他.

---

1. Rewrite the shielding logic of x2apic to avoid reboot twice for each upgrade RR (from 24.6.9).
2. Add "Power off display after boot: true/false" function to choose whether to power off the display after boot the loader.
3. Fix a lot of minor errors in the menu.
4. Fix e1000e compatibility with I-219 LM20~LM29/V20~V29 versions (only epyc7002).
5. Fix the problem of upadenotify plugin reporting "bash: 1: command not found" (previous version saved once as an administrator account "RR-UpdateNotify" scheduled task can work normally).
6. Update addons dependencies.
7. Add support for XEN (to be continued).
8. Others.

Full Changelog: 24.6.9...24.7.0

Add:

• v24.3.4 - v24.6.6 之间的版本 直接升级 v24.7.0 可能会报错: "(错误记号是"+")".
  解决方案1，先升级 v24.6.7, 在升级 24.7.0.
  解决方案2：先执行 sed -i 's/SIZENEW=/#SIZENEW=/g; s/SIZEOLD=/#SIZEOLD=/g' /opt/rr/menu.sh , 再升级.

---

• If you directly upgrade to v24.7.0 from a version between v24.3.4 - v24.6.6 , you may get an error message "(error symbol is "+")".
  Solution 1: Upgrade to v24.6.7 first and then upgrade to 24.7.0.
  Solution 2: Execute sed -i 's/SIZENEW=/#SIZENEW=/g; s/SIZEOLD=/#SIZEOLD=/g' /opt/rr/menu.sh first and then upgrade.

24.6.9

1. 修复 DT 型号找不到硬盘的问题(from 24.6.8).
2. 修复 acpid 插件未生效的问题(from 24.6.4).
3. 更新 recovery.cgi 默认 shell.
4. 更新 i2c-i801.ko 对 Ice Lake-N, Alder Lake-P/M, Raptor Lake-S, Meteor Lake-P/SoC-S/PCH-S, Birch Stream 的兼容(only epyc7002).
5. 增加 对 XEN 的支持(未完待续).
6. 优化 "格式化磁盘" 显示更多信息.
7. 增加 x2apic 的支持(apollolake,geminilake,purley 架构由于不支持 x2apic, 首次安装完成时会主动重启2次设置).

---

1. Fix the disk cannot be found of the DT models(from 24.6.8).
2. Fix the acpid addon is not effective(from 24.6.4).
3. Update the default shell of recovery.cgi.
4. Update the i2c-i801.ko compatibility for Ice Lake-N, Alder Lake-P/M, Raptor Lake-S, Meteor Lake-P/SoC-S/PCH-S, Birch Stream(only epyc7002).
5. Add support for XEN(not complete).
6. Optimize "Format disk" to display more information.
7. Add support for x2apic(apollolake,geminilake,purley architecture since it does not support x2apic, it will actively restart twice to set it after the first installation is completed).

Full Changelog: 24.6.8...24.6.9

24.6.8

1. 重构 sortnetif addon 的逻辑, 缓解 RR DHCP 失败的问题.
2. 调整 DT 型号支持的 ssd 磁盘数上限为 15 个 ( 之前的版本为 7 个).
3. 优化 对 Hyper-V 磁盘的支持 (对特殊 PCI 路径的一个优化, 依然不支持 Hyper-V 的虚拟磁盘).
4. 优化 翻译和一些逻辑.

---

1. Refactor the logic of sortnetif addon to alleviate the problem of RR DHCP failure.
2. Adjust the upper limit of the number of SSD disks supported by the DT model to 15 (the previous version was 7).
3. Optimize the support for Hyper-V disks (an optimization for special PCI paths, still does not support Hyper-V virtual disks).
4. Optimize translation and some logic.

Full Changelog: 24.6.7...24.6.8

24.6.7

1. 修复 使用低分辨率屏幕(800X600) 时 "添加/编辑 cmdline/synoinfo 参数" 条目无法进入的问题.
2. 修复 特殊操作导致出现的 空 cmdline/synoinfo 参数问题.
3. 修复 个别环境的启动超时时的异常中断.
4. 修复 "初始化 DSM 网络设置" 可能不生效的问题.
5. 修复 "添加新用户到 DSM 系统" 可能破坏原账户用户组的问题.
6. 修复 "设置静态 IP" (单向同步设置到 DSM).
7. 修复 系统更新可能失败的问题.
8. 修复 非 SA6400 型号安装卡 57% 的问题 (from 24.6.6).
9. 修复 个别显卡(PVE 默认) 花屏的问题 (from 24.6.6).
10. 关闭 kexec 的 "Fast reboot".

---

1. Fix the "Add/Edit cmdline/synoinfo parameters" item cannot be entered when using a low-resolution screen (800X600).
2. Fix empty cmdline/synoinfo parameters caused by special operations.
3. Fix the abnormal interruption when the startup timeout occurs in some environments.
4. Fix "Initialize DSM network settings" may not take effect.
5. Fix "Add new users to DSM system" may destroy the original account user group.
6. Fix "Set static IP" (one-way synchronization settings to DSM).
7. Fix system updates may fail.
8. Fix installing error 57% of non-SA6400 models (from 24.6.6).
9. Fix the problem of screen distortion on some graphics cards (PVE default) (from 24.6.6).
10. Disable "Fast reboot" of kexec.

Full Changelog: 24.6.6...24.6.7

24.6.6

del ...

24.6.5

1. 回退 apollolake, broadwell, broadwellnk 架构 pci stubs 的修改 (from 24.6.4).
2. 修复 个别环境的启动超时时的异常中断.
3. 修复 SA6400 i915 报错 "GUC: CT: Failed to process CT message" (from 24.5.2) (test).
4. 添加 开启 “启用 Spectre 和 Meltdown 防护, 以缓解 speculative execution 漏洞” 的方法 (cmdline).
5. 其他.

---

1. reback pci stubs for apollolake, broadwell, broadwellnk architectures (from 24.6.4).
2. Fix the startup timeout exception interrupt in some environments.
3. Fix the SA6400 i915 error "GUC: CT: Failed to process CT message" (from 24.5.2) (test).
4. Add "Enable Spectre and Meltdown protection to mitigate speculative execution vulnerabilities" method (cmdline).
5. Others.

Full Changelog: 24.6.4...24.6.5

24.6.4

1. 修改 apollolake, broadwell, broadwellnk 架构的 pci stubs.
2. 优化 RR 系统的驱动和程序.
3. 添加 forcedeth, sfc, tehuti, via, jme 网卡驱动.
4. 修改 acpid 插件.
5. 其他.

---

1. Modify pci stubs for apollolake, broadwell, broadwellnk architectures.
2. Optimize RR system drivers and programs.
3. Add forcedeth, sfc, tehuti, via, jme network card drivers.
4. Modify acpid addon.
5. Others.

Full Changelog: 24.6.3...24.6.4

24.6.3

1. 修复 DNS 失败导致网络不可用的问题.
2. 修复 German 翻译, Thanks @TimKraemer.
3. 更新 r8152 to v2.18.1.
4. 更新 mpt3sas to 50.00.00.00

---

1. Fix DNS failure causes network unavailable.
2. Fix German translation, Thanks @TimKraemer.
3. Update r8152 to v2.18.1.
4. Update mpt3sas to 50.00.00.00.

Full Changelog: 24.6.1...24.6.3