[Bug]: Error between Battery and Batteries Charge/Discharge Power sensor values

[Roving-Ronin]

Describe the issue

System has a LUNA 10kW ESS attached to the primary inverter, using the new 'Batteries Charge/Discharge Power' sensor for readings and noticing that the reading from it are different from the 'Battery 1 Charge/Discharge Power' sensor.

These readings above are static for a while, so its not one sensor being behind the other in getting an update. Constantly seeing one giving a positive value whilst the other is showing negative. The other readings seem OK, just the Charge/Discharge for 'batteries' appears erroneous.

I know the huawei-lib is just queying the modbus register, but thought best to double check here..... as otherwise it makes one wonder is there some error in the registers themselves that needs to be fixed by Huawei?

PS. Sorry not my battery, one 5000km away I have access to, otherwise I'd turn on the kettle etc to make the above numbers bigger to highlight the gap.

Describe your Huawei Solar Setup

Inverter Type: 2 x L1 5kW inverters cascaded. Currently only primary inverter is operating (as it has a LUNA ESS attached)
Inverter Firmware version: V200R001C00SPC138
sDongle present: Yes
sDongle Type: sDongleA-05
sDongle Connectivitiy: WiFi
sDongle Firmware: V200R022C10SPC108
Power meter present: Single Phase
Optimizers Present: No
Battery: LUNA2000-SO 10kWh
Battery Firmware version: V100R002C00SPC125
Huawei Solar integration version: v1.4.0a3

How do you connect to the inverter?

Via the SDongle, wireless connection

Upload your Diagnostics File

Drag & Drop your Diagnostics File here.
config_entry-huawei_solar-e7190a773e4143ed923016cd2d3a7e21.json

Upload your relevant debug logs

home-assistant_huawei_solar_2024-05-28T13-13-03.561Z.log

Please confirm the following:

• I'm running the latest release of Home Assistant.
• I'm running the latest release of this integration.
• I did not find an existing issue describing this problem.
• I did upload the diagnostics-file that I could retrieve from the 'Devices & Services Page'
• I did upload the relevant debug logs (via 'Enable Debug Logging'-feature or by manually configuring HA logging)

[wlcrs]

Nothing guarantees that those values are synchronized when being read from the inverter. So this is not a bug.

A clear case of Segal's Law:

A man with a watch knows what time it is. A man with two watches is never sure.

This was also the reason that I didn't export those values in earlier versions of my integration 🙃

[Roving-Ronin]

NP, just flagging for visibility. Having it raised with Huawei developers also.