user guide: fix mkdocs link warning

wntrblm · Feb 28, 2024 · a2453cb · a2453cb
1 parent d633cef
commit a2453cb
Show file tree

Hide file tree

Showing 2 changed files with 4 additions and 4 deletions.
diff --git a/user_guide/docs/build.md b/user_guide/docs/build.md
@@ -287,7 +287,7 @@ Congrats, you finished building your very own Castor & Pollux!
 
 ![Completed module](images/kit/71%20-%20finished.webp)
 
-Continue reading to finish assembling the expander if you'd like. Don't forget to go check out the [User's Guide](/). We'd love to see your work, feel free to tag us on social media - we're `@wntrblm` on [Twitter](https://twitter.com/wntrblm) and [Instagram](https://instagram.com/wntrblm).
+Continue reading to finish assembling the expander if you'd like. Don't forget to go check out the [User's Guide](index.md). We'd love to see your work, feel free to tag us on social media - we're `@wntrblm` on [Twitter](https://twitter.com/wntrblm) and [Instagram](https://instagram.com/wntrblm).
 
 ## Expander
 
@@ -327,6 +327,6 @@ Flip it rightside-up and secure the faceplate using the hex nuts.
 
 ## All done
 
-Congrats on building your very own Castor & Pollux, we hope you had a lovely time! Don't forget to go check out the [User's Guide](/). We'd love to see your work, feel free to tag us on social media - we're `@wntrblm` on [Twitter](https://twitter.com/wntrblm) and [Instagram](https://instagram.com/wntrblm).
+Congrats on building your very own Castor & Pollux, we hope you had a lovely time! Don't forget to go check out the [User's Guide](index.md). We'd love to see your work, feel free to tag us on social media - we're `@wntrblm` on [Twitter](https://twitter.com/wntrblm) and [Instagram](https://instagram.com/wntrblm).
 
 If you have any feedback or ran into any issues, feel free to drop us an email at support@winterbloom.com or file a issue on [GitHub](https://github.com/wntrblm/Castor_and_Pollux).
diff --git a/user_guide/docs/index.md b/user_guide/docs/index.md
@@ -463,7 +463,7 @@ The micro USB port is located on the backside of the module. Once you've connect
 
 Even though Castor & Pollux uses analog circuitry to make its beautiful sounds, there is a little microcontroller brain inside that's orchestrating everything. There are lots of settings you can tweak over USB, such as the LED brightness, the range of the pitch knobs, quantization, and more.
 
-Connect your module to your computer using [a USB cable](#connecting-with-usb) and then head over to the [web-based settings editor](settings) to tweak to your heart's content. You don't need to install any software or drivers.
+Connect your module to your computer using [a USB cable](#connecting-with-usb) and then head over to the [web-based settings editor](settings.md) to tweak to your heart's content. You don't need to install any software or drivers.
 
 ## Updating the firmware
 
@@ -526,7 +526,7 @@ We have stress tested Castor & Pollux under the following conditions. These are
 </figure>
 
 **Corrective action**
-:   This errata can be resolved with just a computer and USB cable. Connect your unit to your computer [via usb](#connecting-with-usb), open the settings editor using [this specific link](/settings#ramp), press the "connect" button, then scroll all the way to the bottom and press the "swap ramp calibration" button. If this does not work for you, please reach out to us at support@winterbloom.com for assistance.
+:   This errata can be resolved with just a computer and USB cable. Connect your unit to your computer [via usb](#connecting-with-usb), open the settings editor using [this specific link](settings.md#ramp), press the "connect" button, then scroll all the way to the bottom and press the "swap ramp calibration" button. If this does not work for you, please reach out to us at support@winterbloom.com for assistance.
 
 ## Acknowledgments and thanks