Skip to content

Ports Ranges

Jump to bottom
Aleksandar Ovcharov edited this page Dec 24, 2023 · 2 revisions

Ports Ranges

This section is dedicated to the configuration of port ranges for various server functionalities. Properly setting these ranges is vital to prevent port conflicts and ensure seamless operation of services.

Configuration Guide: Define port ranges in a JSON format. Specify the start and end of the range for each server function. For instance, you might set a range for the main server port, a query port, and an RCON (Remote Console) port.

Example:

{"SERVER_PORT": "7777-7780", "QUERY_PORT": "27015-27019", "RCON_PORT": "27020-27030","EXTRA_ALLOCATION": "27019-27030:2"}

SERVER_PORT is required!

Description of JSON Variables

  • SERVER_PORT: Specifies the range of ports where Pterodactyl will create the server. Format: "start-end".
  • QUERY_PORT: Defines the range for query ports, added if the relevant variable exists in Pterodactyl. Format: "start-end".
  • RCON_PORT: Sets the range for RCON (Remote Console) ports, added if the variable exists in Pterodactyl. Format: "start-end".
  • EXTRA_ALLOCATION: Determines additional ports to be added. For example, "27019-27030:2" means two ports from the 27019-27030 range will be added.

Each range is defined as "start-end", ensuring exclusive use of ports within these boundaries for their respective purposes.

You can use https://jsonlint.com to validate your port range json.

Clone this wiki locally