rtc: mc146818-lib: Fix the AltCentury for AMD platforms

[ Upstream commit 3ae8fd4 ]

Setting the century forward has been failing on AMD platforms.
There was a previous attempt at fixing this for family 0x17 as part of
commit 7ad295d ("rtc: Fix the AltCentury value on AMD/Hygon
platform") but this was later reverted due to some problems reported
that appeared to stem from an FW bug on a family 0x17 desktop system.

The same comments mentioned in the previous commit continue to apply
to the newer platforms as well.

```
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.

While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.

DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).

Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
```

However in closer examination the change previously submitted was also
modifying bits 5 & 6 which are declared reserved in the AMD documentation.
So instead modify just the DV0 bank selection bit.

Being cognizant that there was a failure reported before, split the code
change out to a static function that can also be used for exclusions if
any regressions such as Mikhail's pop up again.

Cc: Jinke Fan <fanjinke@hygon.cn>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/
Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/rtc/rtc-mc146818-lib.c

@@ -99,6 +99,17 @@ unsigned int mc146818_get_time(struct rtc_time *time)
 }
 EXPORT_SYMBOL_GPL(mc146818_get_time);
 
+/* AMD systems don't allow access to AltCentury with DV1 */
+static bool apply_amd_register_a_behavior(void)
+{
+#ifdef CONFIG_X86
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
+	    boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
+		return true;
+#endif
+	return false;
+}
+
 /* Set the current date and time in the real time clock. */
 int mc146818_set_time(struct rtc_time *time)
 {
@@ -172,7 +183,10 @@ int mc146818_set_time(struct rtc_time *time)
 	save_control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
 	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+	if (apply_amd_register_a_behavior())
+		CMOS_WRITE((save_freq_select & ~RTC_AMD_BANK_SELECT), RTC_FREQ_SELECT);
+	else
+		CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 
 #ifdef CONFIG_MACH_DECSTATION
 	CMOS_WRITE(real_yrs, RTC_DEC_YEAR);

include/linux/mc146818rtc.h

@@ -86,6 +86,8 @@ struct cmos_rtc_board_info {
    /* 2 values for divider stage reset, others for "testing purposes only" */
 #  define RTC_DIV_RESET1	0x60
 #  define RTC_DIV_RESET2	0x70
+   /* In AMD BKDG bit 5 and 6 are reserved, bit 4 is for select dv0 bank */
+#  define RTC_AMD_BANK_SELECT	0x10
   /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
 # define RTC_RATE_SELECT 	0x0F