Merge tag 'v6.3.2' into 6.3

This is the 6.3.2 stable release
xanmod · May 12, 2023 · 0aaa8c4 · 0aaa8c4
2 parents cf0c658 + 5729a90
commit 0aaa8c4
Show file tree

Hide file tree

Showing 813 changed files with 8,785 additions and 7,118 deletions.
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -68,7 +68,7 @@ properties:
       - const: apb_pclk
 
   dmas:
-    minItems: 2
+    maxItems: 2
 
   dma-names:
     items:

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -30,6 +30,7 @@ properties:
     const: 0
 
   clocks:
+    minItems: 3
     maxItems: 5
 
   clock-names:

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 3
-SUBLEVEL = 1
+SUBLEVEL = 2
 EXTRAVERSION =
 NAME = Hurr durr I'ma ninja sloth
 

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -612,6 +612,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1260,7 +1260,7 @@
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-320000000 {
+				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 				};
 

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -426,8 +426,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1081,8 +1081,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1132,8 +1132,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1183,8 +1183,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -304,6 +304,45 @@
 			status = "disabled";
 		};
 
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux", "cfg", "bus_master", "bus_slave",
+				      "slave_q2a", "sleep", "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global", "doorbell";
+			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		pcie0_phy: phy@1c07000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
 			reg = <0x01c07000 0x1c4>;
@@ -401,45 +440,6 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@40000000 {
-			compatible = "qcom,sdx55-pcie-ep";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40200000 0x100000>,
-			      <0x01c03000 0x3000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
-				    "mmio";
-
-			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
-
-			clocks = <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux", "cfg", "bus_master", "bus_slave",
-				      "slave_q2a", "sleep", "ref";
-
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global", "doorbell";
-			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "core";
-			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie0_lane>;
-			phy-names = "pciephy";
-			max-link-speed = <3>;
-			num-lanes = <2>;
-
-			status = "disabled";
-		};
-
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2448,19 +2463,4 @@
 			bias-disable;
 		};
 	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
@@ -22,15 +22,13 @@
 @  IRQs enabled.
 @
 ENTRY(do_vfp)
-	local_bh_disable r10, r4
+	mov	r1, r10
+	mov	r3, r9
  	ldr	r4, .LCvfp
-	ldr	r11, [r10, #TI_CPU]	@ CPU number
-	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
 	ldr	pc, [r4]		@ call VFP entry point
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-	local_bh_enable_ti r10, r4
 	ret	lr
 ENDPROC(vfp_null_entry)
 

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
@@ -6,9 +6,9 @@
  *  Written by Deep Blue Solutions Limited.
  *
  * This code is called from the kernel's undefined instruction trap.
- * r9 holds the return address for successful handling.
+ * r1 holds the thread_info pointer
+ * r3 holds the return address for successful handling.
  * lr holds the return address for unrecognised instructions.
- * r10 points at the start of the private FP workspace in the thread structure
  * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
  */
 #include <linux/init.h>
@@ -69,13 +69,17 @@
 @ VFP hardware support entry point.
 @
 @  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r1  = thread_info pointer
 @  r2  = PC value to resume execution after successful emulation
-@  r9  = normal "successful" return address
-@  r10 = vfp_state union
-@  r11 = CPU number
+@  r3  = normal "successful" return address
 @  lr  = unrecognised instruction return address
 @  IRQs enabled.
 ENTRY(vfp_support_entry)
+	local_bh_disable r1, r4
+
+	ldr	r11, [r1, #TI_CPU]	@ CPU number
+	add	r10, r1, #TI_VFPSTATE	@ r10 = workspace
+
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
 	.fpu	vfpv2
@@ -85,9 +89,9 @@ ENTRY(vfp_support_entry)
 	bne	look_for_VFP_exceptions	@ VFP is already enabled
 
 	DBGSTR1 "enable %x", r10
-	ldr	r3, vfp_current_hw_state_address
+	ldr	r9, vfp_current_hw_state_address
 	orr	r1, r1, #FPEXC_EN	@ user FPEXC has the enable bit set
-	ldr	r4, [r3, r11, lsl #2]	@ vfp_current_hw_state pointer
+	ldr	r4, [r9, r11, lsl #2]	@ vfp_current_hw_state pointer
 	bic	r5, r1, #FPEXC_EX	@ make sure exceptions are disabled
 	cmp	r4, r10			@ this thread owns the hw context?
 #ifndef CONFIG_SMP
@@ -146,7 +150,7 @@ vfp_reload_hw:
 #endif
 
 	DBGSTR1	"load state %p", r10
-	str	r10, [r3, r11, lsl #2]	@ update the vfp_current_hw_state pointer
+	str	r10, [r9, r11, lsl #2]	@ update the vfp_current_hw_state pointer
 					@ Load the saved state back into the VFP
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
@@ -176,7 +180,7 @@ vfp_hw_state_valid:
 					@ always subtract 4 from the following
 					@ instruction address.
 	local_bh_enable_ti r10, r4
-	ret	r9			@ we think we have handled things
+	ret	r3			@ we think we have handled things
 
 
 look_for_VFP_exceptions:
@@ -206,7 +210,7 @@ skip:
 process_exception:
 	DBGSTR	"bounce"
 	mov	r2, sp			@ nothing stacked - regdump is at TOS
-	mov	lr, r9			@ setup for a return to the user code.
+	mov	lr, r3			@ setup for a return to the user code.
 
 	@ Now call the C code to package up the bounce to the support code
 	@   r0 holds the trigger instruction

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -360,23 +360,23 @@
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
-	clock-names = "clkin2";
+	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
-	clock-names = "clkin3";
+	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
-	clock-names = "clkin4";
+	clock-names = "clkin1";
 	status = "okay";
 };
 

diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -37,17 +37,27 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
 };
 
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 };