mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()

The probe function is only supposed to initialize the controller
hardware but not the ECC engine. Indeed, we don't know anything about
the NAND chip(s) at this stage. Let's move the logic initializing the
ECC engine, even pretty simple, to the ->attach_chip() hook which gets
called during nand_scan() routine, after the NAND chip discovery. As
the previously mentioned logic is supposed to parse the DT for us, it
is likely that the chip->ecc.* entries be overwritten. So let's avoid
this by moving these lines to ->attach_chip().

Fixes: d7157ff ("mtd: rawnand: Use the ECC framework user input parsing bits")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

drivers/mtd/nand/raw/sharpsl.c

@@ -20,6 +20,7 @@
 #include <linux/io.h>
 
 struct sharpsl_nand {
+	struct nand_controller	controller;
 	struct nand_chip	chip;
 
 	void __iomem		*io;
@@ -96,6 +97,25 @@ static int sharpsl_nand_calculate_ecc(struct nand_chip *chip,
 	return readb(sharpsl->io + ECCCNTR) != 0;
 }
 
+static int sharpsl_attach_chip(struct nand_chip *chip)
+{
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
+		return 0;
+
+	chip->ecc.size = 256;
+	chip->ecc.bytes = 3;
+	chip->ecc.strength = 1;
+	chip->ecc.hwctl = sharpsl_nand_enable_hwecc;
+	chip->ecc.calculate = sharpsl_nand_calculate_ecc;
+	chip->ecc.correct = nand_correct_data;
+
+	return 0;
+}
+
+static const struct nand_controller_ops sharpsl_ops = {
+	.attach_chip = sharpsl_attach_chip,
+};
+
 /*
  * Main initialization routine
  */
@@ -136,6 +156,10 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
 	/* Get pointer to private data */
 	this = (struct nand_chip *)(&sharpsl->chip);
 
+	nand_controller_init(&sharpsl->controller);
+	sharpsl->controller.ops = &sharpsl_ops;
+	this->controller = &sharpsl->controller;
+
 	/* Link the private data with the MTD structure */
 	mtd = nand_to_mtd(this);
 	mtd->dev.parent = &pdev->dev;
@@ -156,15 +180,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
 	this->legacy.dev_ready = sharpsl_nand_dev_ready;
 	/* 15 us command delay time */
 	this->legacy.chip_delay = 15;
-	/* set eccmode using hardware ECC */
-	this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-	this->ecc.size = 256;
-	this->ecc.bytes = 3;
-	this->ecc.strength = 1;
 	this->badblock_pattern = data->badblock_pattern;
-	this->ecc.hwctl = sharpsl_nand_enable_hwecc;
-	this->ecc.calculate = sharpsl_nand_calculate_ecc;
-	this->ecc.correct = nand_correct_data;
 
 	/* Scan to find existence of the device */
 	err = nand_scan(this, 1);