drm/msm/dsi: add support for 7nm DSI PHY/PLL

This adds support for the 7nm ("V4") DSI PHY/PLL for sm8150 and sm8250.

Implementation is based on 10nm driver, but updated based on the downstream
7nm driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>

Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -90,6 +90,8 @@ Required properties:
   * "qcom,dsi-phy-14nm-660"
   * "qcom,dsi-phy-10nm"
   * "qcom,dsi-phy-10nm-8998"
+  * "qcom,dsi-phy-7nm"
+  * "qcom,dsi-phy-7nm-8150"
 - reg: Physical base address and length of the registers of PLL, PHY. Some
   revisions require the PHY regulator base address, whereas others require the
   PHY lane base address. See below for each PHY revision.
@@ -98,7 +100,7 @@ Required properties:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
-  For DSI 14nm and 10nm PHYs:
+  For DSI 14nm, 10nm and 7nm PHYs:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_lane"
@@ -116,7 +118,7 @@ Required properties:
 - vcca-supply: phandle to vcca regulator device node
   For 14nm PHY:
 - vcca-supply: phandle to vcca regulator device node
-  For 10nm PHY:
+  For 10nm and 7nm PHY:
 - vdds-supply: phandle to vdds regulator device node
 
 Optional properties:

drivers/gpu/drm/msm/Kconfig

@@ -110,3 +110,11 @@ config DRM_MSM_DSI_10NM_PHY
 	default y
 	help
 	  Choose this option if DSI PHY on SDM845 is used on the platform.
+
+config DRM_MSM_DSI_7NM_PHY
+	bool "Enable DSI 7nm PHY driver in MSM DRM (used by SM8150/SM8250)"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if DSI PHY on SM8150/SM8250 is used on the
+	  platform.

drivers/gpu/drm/msm/Makefile

@@ -119,13 +119,15 @@ msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/phy/dsi_phy_14nm.o
 msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/phy/dsi_phy_10nm.o
+msm-$(CONFIG_DRM_MSM_DSI_7NM_PHY) += dsi/phy/dsi_phy_7nm.o
 
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
 msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o
 msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o
+msm-$(CONFIG_DRM_MSM_DSI_7NM_PHY) += dsi/pll/dsi_pll_7nm.o
 endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o

drivers/gpu/drm/msm/dsi/dsi.h

@@ -30,6 +30,8 @@ enum msm_dsi_phy_type {
 	MSM_DSI_PHY_28NM_8960,
 	MSM_DSI_PHY_14NM,
 	MSM_DSI_PHY_10NM,
+	MSM_DSI_PHY_7NM,
+	MSM_DSI_PHY_7NM_V4_1,
 	MSM_DSI_PHY_MAX
 };