net/mlx5e: Support HTB offload

This commit adds support for HTB offload in the mlx5e driver.

Performance:

  NIC: Mellanox ConnectX-6 Dx
  CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz (24 cores with HT)

  100 Gbit/s line rate, 500 UDP streams @ ~200 Mbit/s each
  48 traffic classes, flower used for steering
  No shaping (rate limits set to 4 Gbit/s per TC) - checking for max
  throughput.

  Baseline: 98.7 Gbps, 8.25 Mpps
  HTB: 6.7 Gbps, 0.56 Mpps
  HTB offload: 95.6 Gbps, 8.00 Mpps

Limitations:

1. 256 leaf nodes, 3 levels of depth.

2. Granularity for ceil is 1 Mbit/s. Rates are converted to weights, and
the bandwidth is split among the siblings according to these weights.
Other parameters for classes are not supported.

Ethtool statistics support for QoS SQs are also added. The counters are
called qos_txN_*, where N is the QoS queue number (starting from 0, the
numeration is separate from the normal SQs), and * is the counter name
(the counters are the same as for the normal SQs).

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -16,7 +16,8 @@ mlx5_core-y :=	main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
 		transobj.o vport.o sriov.o fs_cmd.o fs_core.o pci_irq.o \
 		fs_counters.o rl.o lag.o dev.o events.o wq.o lib/gid.o \
 		lib/devcom.o lib/pci_vsc.o lib/dm.o diag/fs_tracepoint.o \
-		diag/fw_tracer.o diag/crdump.o devlink.o diag/rsc_dump.o fw_reset.o
+		diag/fw_tracer.o diag/crdump.o devlink.o diag/rsc_dump.o \
+		fw_reset.o qos.o
 
 #
 # Netdev basic
@@ -25,7 +26,8 @@ mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
 		en_tx.o en_rx.o en_dim.o en_txrx.o en/xdp.o en_stats.o \
 		en_selftest.o en/port.o en/monitor_stats.o en/health.o \
 		en/reporter_tx.o en/reporter_rx.o en/params.o en/xsk/pool.o \
-		en/xsk/setup.o en/xsk/rx.o en/xsk/tx.o en/devlink.o en/ptp.o
+		en/xsk/setup.o en/xsk/rx.o en/xsk/tx.o en/devlink.o en/ptp.o \
+		en/qos.o
 
 #
 # Netdev extra

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -55,6 +55,7 @@
 #include "en_stats.h"
 #include "en/dcbnl.h"
 #include "en/fs.h"
+#include "en/qos.h"
 #include "lib/hv_vhca.h"
 
 extern const struct net_device_ops mlx5e_netdev_ops;
@@ -161,6 +162,9 @@ do {                                                            \
 			    ##__VA_ARGS__);                     \
 } while (0)
 
+#define mlx5e_state_dereference(priv, p) \
+	rcu_dereference_protected((p), lockdep_is_held(&(priv)->state_lock))
+
 enum mlx5e_rq_group {
 	MLX5E_RQ_GROUP_REGULAR,
 	MLX5E_RQ_GROUP_XSK,
@@ -663,11 +667,13 @@ struct mlx5e_channel {
 	struct mlx5e_xdpsq         rq_xdpsq;
 	struct mlx5e_txqsq         sq[MLX5E_MAX_NUM_TC];
 	struct mlx5e_icosq         icosq;   /* internal control operations */
+	struct mlx5e_txqsq __rcu * __rcu *qos_sqs;
 	bool                       xdp;
 	struct napi_struct         napi;
 	struct device             *pdev;
 	struct net_device         *netdev;
 	__be32                     mkey_be;
+	u16                        qos_sqs_size;
 	u8                         num_tc;
 	u8                         lag_port;
 
@@ -756,6 +762,8 @@ struct mlx5e_modify_sq_param {
 	int next_state;
 	int rl_update;
 	int rl_index;
+	bool qos_update;
+	u16 qos_queue_group_id;
 };
 
 #if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE)
@@ -788,10 +796,20 @@ struct mlx5e_scratchpad {
 	cpumask_var_t cpumask;
 };
 
+struct mlx5e_htb {
+	DECLARE_HASHTABLE(qos_tc2node, order_base_2(MLX5E_QOS_MAX_LEAF_NODES));
+	DECLARE_BITMAP(qos_used_qids, MLX5E_QOS_MAX_LEAF_NODES);
+	struct mlx5e_sq_stats **qos_sq_stats;
+	u16 max_qos_sqs;
+	u16 maj_id;
+	u16 defcls;
+};
+
 struct mlx5e_priv {
 	/* priv data path fields - start */
 	/* +1 for port ptp ts */
-	struct mlx5e_txqsq *txq2sq[(MLX5E_MAX_NUM_CHANNELS + 1) * MLX5E_MAX_NUM_TC];
+	struct mlx5e_txqsq *txq2sq[(MLX5E_MAX_NUM_CHANNELS + 1) * MLX5E_MAX_NUM_TC +
+				   MLX5E_QOS_MAX_LEAF_NODES];
 	int channel_tc2realtxq[MLX5E_MAX_NUM_CHANNELS][MLX5E_MAX_NUM_TC];
 	int port_ptp_tc2realtxq[MLX5E_MAX_NUM_TC];
 #ifdef CONFIG_MLX5_CORE_EN_DCB
@@ -859,6 +877,7 @@ struct mlx5e_priv {
 	struct mlx5e_hv_vhca_stats_agent stats_agent;
 #endif
 	struct mlx5e_scratchpad    scratchpad;
+	struct mlx5e_htb           htb;
 };
 
 struct mlx5e_rx_handlers {
@@ -986,6 +1005,7 @@ int mlx5e_safe_switch_channels(struct mlx5e_priv *priv,
 			       struct mlx5e_channels *new_chs,
 			       mlx5e_fp_preactivate preactivate,
 			       void *context);
+int mlx5e_update_tx_netdev_queues(struct mlx5e_priv *priv);
 int mlx5e_num_channels_changed(struct mlx5e_priv *priv);
 int mlx5e_num_channels_changed_ctx(struct mlx5e_priv *priv, void *context);
 void mlx5e_activate_priv_channels(struct mlx5e_priv *priv);
@@ -1010,6 +1030,9 @@ void mlx5e_deactivate_icosq(struct mlx5e_icosq *icosq);
 
 int mlx5e_modify_sq(struct mlx5_core_dev *mdev, u32 sqn,
 		    struct mlx5e_modify_sq_param *p);
+int mlx5e_open_txqsq(struct mlx5e_channel *c, u32 tisn, int txq_ix,
+		     struct mlx5e_params *params, struct mlx5e_sq_param *param,
+		     struct mlx5e_txqsq *sq, int tc, u16 qos_queue_group_id, u16 qos_qid);
 void mlx5e_activate_txqsq(struct mlx5e_txqsq *sq);
 void mlx5e_deactivate_txqsq(struct mlx5e_txqsq *sq);
 void mlx5e_free_txqsq(struct mlx5e_txqsq *sq);
@@ -1020,8 +1043,10 @@ struct mlx5e_create_sq_param;
 int mlx5e_create_sq_rdy(struct mlx5_core_dev *mdev,
 			struct mlx5e_sq_param *param,
 			struct mlx5e_create_sq_param *csp,
+			u16 qos_queue_group_id,
 			u32 *sqn);
 void mlx5e_tx_err_cqe_work(struct work_struct *recover_work);
+void mlx5e_close_txqsq(struct mlx5e_txqsq *sq);
 
 static inline bool mlx5_tx_swp_supported(struct mlx5_core_dev *mdev)
 {

drivers/net/ethernet/mellanox/mlx5/core/en/params.h

@@ -118,6 +118,8 @@ void mlx5e_build_rq_param(struct mlx5e_priv *priv,
 			  struct mlx5e_rq_param *param);
 void mlx5e_build_sq_param_common(struct mlx5e_priv *priv,
 				 struct mlx5e_sq_param *param);
+void mlx5e_build_sq_param(struct mlx5e_priv *priv, struct mlx5e_params *params,
+			  struct mlx5e_sq_param *param);
 void mlx5e_build_rx_cq_param(struct mlx5e_priv *priv,
 			     struct mlx5e_params *params,
 			     struct mlx5e_xsk_param *xsk,

drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c

@@ -261,7 +261,7 @@ static int mlx5e_ptp_open_txqsq(struct mlx5e_port_ptp *c, u32 tisn,
 	csp.min_inline_mode = txqsq->min_inline_mode;
 	csp.ts_cqe_to_dest_cqn = ptpsq->ts_cq.mcq.cqn;
 
-	err = mlx5e_create_sq_rdy(c->mdev, sqp, &csp, &txqsq->sqn);
+	err = mlx5e_create_sq_rdy(c->mdev, sqp, &csp, 0, &txqsq->sqn);
 	if (err)
 		goto err_free_txqsq;