ath6kl: add back beginnings of USB support

John Linville had to revert the part of USB support which was already
in ath6kl due to build problems in commit cb00ec3 ("ath6kl: revert
USB support"). Now that I fixed the build problems properly by adding
ath6kl_core.ko kernel module it's possible to add back the
(incomplete) USB support. This patch is a revert of John's patch and
adds back the USB code which as already in ath6kl, only difference
being minor changes in Makefile and adapting usb.c to new core
function names.

Note that USB support in ath6kl is not complete yet. This code only
makes it possible to boot firmware but as HTC layer does not yet
support USB it's not possible to send any WMI commands nor data
packets to the firmware. That will be added soon.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath6kl/Kconfig

@@ -1,12 +1,29 @@
 config ATH6KL
-	tristate "Atheros ath6kl support"
+	tristate "Atheros mobile chipsets support"
+
+config ATH6KL_SDIO
+	tristate "Atheros ath6kl SDIO support"
+	depends on ATH6KL
 	depends on MMC
 	depends on CFG80211
 	---help---
 	  This module adds support for wireless adapters based on
-	  Atheros AR6003 chipset running over SDIO. If you choose to
-	  build it as a module, it will be called ath6kl. Pls note
-	  that AR6002 and AR6001 are not supported by this driver.
+	  Atheros AR6003 and AR6004 chipsets running over SDIO. If you
+	  choose to build it as a module, it will be called ath6kl_sdio.
+	  Please note that AR6002 and AR6001 are not supported by this
+	  driver.
+
+config ATH6KL_USB
+	tristate "Atheros ath6kl USB support"
+	depends on ATH6KL
+	depends on USB
+	depends on CFG80211
+	depends on EXPERIMENTAL
+	---help---
+	  This module adds support for wireless adapters based on
+	  Atheros AR6004 chipset running over USB. This is still under
+	  implementation and it isn't functional. If you choose to
+	  build it as a module, it will be called ath6kl_usb.
 
 config ATH6KL_DEBUG
 	bool "Atheros ath6kl debugging"

drivers/net/wireless/ath/ath6kl/Makefile

@@ -36,3 +36,6 @@ ath6kl_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 
 obj-$(CONFIG_ATH6KL_SDIO) += ath6kl_sdio.o
 ath6kl_sdio-y += sdio.o
+
+obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
+ath6kl_usb-y += usb.o

drivers/net/wireless/ath/ath6kl/bmi.c

@@ -57,8 +57,14 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
 		return ret;
 	}
 
-	ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
-				  sizeof(targ_info->version));
+	if (ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+		ret = ath6kl_hif_bmi_read(ar, (u8 *)targ_info,
+					  sizeof(*targ_info));
+	} else {
+		ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
+				sizeof(targ_info->version));
+	}
+
 	if (ret) {
 		ath6kl_err("Unable to recv target info: %d\n", ret);
 		return ret;

drivers/net/wireless/ath/ath6kl/debug.h

@@ -41,6 +41,7 @@ enum ATH6K_DEBUG_MASK {
 	ATH6KL_DBG_BOOT		= BIT(18),    /* driver init and fw boot */
 	ATH6KL_DBG_WMI_DUMP	= BIT(19),
 	ATH6KL_DBG_SUSPEND	= BIT(20),
+	ATH6KL_DBG_USB		= BIT(21),
 	ATH6KL_DBG_ANY	        = 0xffffffff  /* enable all logs */
 };
 

drivers/net/wireless/ath/ath6kl/hif.c

@@ -693,6 +693,11 @@ int ath6kl_hif_setup(struct ath6kl_device *dev)
 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n",
 		   dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr);
 
+	/* usb doesn't support enabling interrupts */
+	/* FIXME: remove check once USB support is implemented */
+	if (dev->ar->hif_type == ATH6KL_HIF_TYPE_USB)
+		return 0;
+
 	status = ath6kl_hif_disable_intrs(dev);
 
 fail_setup:

drivers/net/wireless/ath/ath6kl/htc.c

@@ -2544,6 +2544,12 @@ int ath6kl_htc_wait_target(struct htc_target *target)
 	struct htc_service_connect_resp resp;
 	int status;
 
+	/* FIXME: remove once USB support is implemented */
+	if (target->dev->ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+		ath6kl_err("HTC doesn't support USB yet. Patience!\n");
+		return -EOPNOTSUPP;
+	}
+
 	/* we should be getting 1 control message that the target is ready */
 	packet = htc_wait_for_ctrl_msg(target);
 
@@ -2773,7 +2779,9 @@ void ath6kl_htc_cleanup(struct htc_target *target)
 {
 	struct htc_packet *packet, *tmp_packet;
 
-	ath6kl_hif_cleanup_scatter(target->dev->ar);
+	/* FIXME: remove check once USB support is implemented */
+	if (target->dev->ar->hif_type != ATH6KL_HIF_TYPE_USB)
+		ath6kl_hif_cleanup_scatter(target->dev->ar);
 
 	list_for_each_entry_safe(packet, tmp_packet,
 			&target->free_ctrl_txbuf, list) {

drivers/net/wireless/ath/ath6kl/sdio.c

@@ -1330,7 +1330,7 @@ static const struct sdio_device_id ath6kl_sdio_devices[] = {
 MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
 
 static struct sdio_driver ath6kl_sdio_driver = {
-	.name = "ath6kl",
+	.name = "ath6kl_sdio",
 	.id_table = ath6kl_sdio_devices,
 	.probe = ath6kl_sdio_probe,
 	.remove = ath6kl_sdio_remove,