Merge tag 'v5.15.12' into 5.15

This is the 5.15.12 stable release

Documentation/admin-guide/kernel-parameters.txt

@@ -2407,8 +2407,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).

Documentation/hwmon/lm90.rst

@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 

Documentation/networking/bonding.rst

@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.

Documentation/sound/hd-audio/models.rst

@@ -326,6 +326,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 11
+SUBLEVEL = 12
 EXTRAVERSION =
 NAME = Trick or Treat
 

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -309,6 +309,7 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };

arch/arm/kernel/entry-armv.S

@@ -597,11 +597,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -610,7 +608,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 

arch/arm/kernel/head-nommu.S

@@ -114,6 +114,7 @@ ENTRY(secondary_startup)
 	add	r12, r12, r10
 	ret	r12
 1:	bl	__after_proc_init
+	ldr	r7, __secondary_data		@ reload r7
 	ldr	sp, [r7, #12]			@ set up the stack pointer
 	mov	fp, #0
 	b	secondary_start_kernel

arch/arm64/Kconfig

@@ -1264,7 +1264,8 @@ config KUSER_HELPERS
 
 config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
-	depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
+	depends on !CPU_BIG_ENDIAN
+	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
 	select GENERIC_COMPAT_VDSO
 	default y
 	help

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts

@@ -69,7 +69,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

@@ -719,7 +719,7 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 			status = "disabled";
 		};
 
@@ -768,7 +768,7 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
 			status = "disabled";
 		};
 

arch/arm64/kernel/vdso32/Makefile

@@ -10,18 +10,15 @@ include $(srctree)/lib/vdso/Makefile
 
 # Same as cc-*option, but using CC_COMPAT instead of CC
 ifeq ($(CONFIG_CC_IS_CLANG), y)
-CC_COMPAT_CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%))
-
 CC_COMPAT ?= $(CC)
-CC_COMPAT += $(CC_COMPAT_CLANG_FLAGS)
-
-ifneq ($(LLVM),)
-LD_COMPAT ?= $(LD)
+CC_COMPAT += --target=arm-linux-gnueabi
 else
-LD_COMPAT ?= $(CROSS_COMPILE_COMPAT)ld
+CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc
 endif
+
+ifeq ($(CONFIG_LD_IS_LLD), y)
+LD_COMPAT ?= $(LD)
 else
-CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc
 LD_COMPAT ?= $(CROSS_COMPILE_COMPAT)ld
 endif
 
@@ -47,10 +44,6 @@ VDSO_CPPFLAGS += $(LINUXINCLUDE)
 # Common C and assembly flags
 # From top-level Makefile
 VDSO_CAFLAGS := $(VDSO_CPPFLAGS)
-ifneq ($(shell $(CC_COMPAT) --version 2>&1 | head -n 1 | grep clang),)
-VDSO_CAFLAGS += --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%))
-endif
-
 VDSO_CAFLAGS += $(call cc32-option,-fno-PIE)
 ifdef CONFIG_DEBUG_INFO
 VDSO_CAFLAGS += -g

arch/parisc/include/asm/futex.h

@@ -16,7 +16,7 @@ static inline void
 _futex_spin_lock_irqsave(u32 __user *uaddr, unsigned long int *flags)
 {
 	extern u32 lws_lock_start[];
-	long index = ((long)uaddr & 0x3f8) >> 1;
+	long index = ((long)uaddr & 0x7f8) >> 1;
 	arch_spinlock_t *s = (arch_spinlock_t *)&lws_lock_start[index];
 	local_irq_save(*flags);
 	arch_spin_lock(s);
@@ -26,7 +26,7 @@ static inline void
 _futex_spin_unlock_irqrestore(u32 __user *uaddr, unsigned long int *flags)
 {
 	extern u32 lws_lock_start[];
-	long index = ((long)uaddr & 0x3f8) >> 1;
+	long index = ((long)uaddr & 0x7f8) >> 1;
 	arch_spinlock_t *s = (arch_spinlock_t *)&lws_lock_start[index];
 	arch_spin_unlock(s);
 	local_irq_restore(*flags);

arch/parisc/kernel/syscall.S

@@ -478,7 +478,7 @@ lws_start:
 	extrd,u	%r1,PSW_W_BIT,1,%r1
 	/* sp must be aligned on 4, so deposit the W bit setting into
 	 * the bottom of sp temporarily */
-	or,ev	%r1,%r30,%r30
+	or,od	%r1,%r30,%r30
 
 	/* Clip LWS number to a 32-bit value for 32-bit processes */
 	depdi	0, 31, 32, %r20

arch/x86/include/asm/kvm-x86-ops.h

@@ -47,6 +47,7 @@ KVM_X86_OP(set_dr7)
 KVM_X86_OP(cache_reg)
 KVM_X86_OP(get_rflags)
 KVM_X86_OP(set_rflags)
+KVM_X86_OP(get_if_flag)
 KVM_X86_OP(tlb_flush_all)
 KVM_X86_OP(tlb_flush_current)
 KVM_X86_OP_NULL(tlb_remote_flush)

arch/x86/include/asm/kvm_host.h

@@ -1341,6 +1341,7 @@ struct kvm_x86_ops {
 	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
 	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
 	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+	bool (*get_if_flag)(struct kvm_vcpu *vcpu);
 
 	void (*tlb_flush_all)(struct kvm_vcpu *vcpu);
 	void (*tlb_flush_current)(struct kvm_vcpu *vcpu);

arch/x86/include/asm/pkru.h

@@ -4,8 +4,8 @@
 
 #include <asm/fpu/xstate.h>
 
-#define PKRU_AD_BIT 0x1
-#define PKRU_WD_BIT 0x2
+#define PKRU_AD_BIT 0x1u
+#define PKRU_WD_BIT 0x2u
 #define PKRU_BITS_PER_PKEY 2
 
 #ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS

arch/x86/kernel/setup.c

@@ -713,9 +713,6 @@ static void __init early_reserve_memory(void)
 
 	early_reserve_initrd();
 
-	if (efi_enabled(EFI_BOOT))
-		efi_memblock_x86_reserve_range();
-
 	memblock_x86_reserve_range_setup_data();
 
 	reserve_ibft_region();
@@ -742,28 +739,6 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
 	return 0;
 }
 
-static char *prepare_command_line(void)
-{
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
-	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
-	if (builtin_cmdline[0]) {
-		/* append boot loader cmdline to builtin */
-		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-	}
-#endif
-#endif
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-
-	parse_early_param();
-
-	return command_line;
-}
-
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -852,23 +827,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.oem.arch_setup();
 
-	/*
-	 * x86_configure_nx() is called before parse_early_param() (called by
-	 * prepare_command_line()) to detect whether hardware doesn't support
-	 * NX (so that the early EHCI debug console setup can safely call
-	 * set_fixmap()). It may then be called again from within noexec_setup()
-	 * during parsing early parameters to honor the respective command line
-	 * option.
-	 */
-	x86_configure_nx();
-
-	/*
-	 * This parses early params and it needs to run before
-	 * early_reserve_memory() because latter relies on such settings
-	 * supplied as early params.
-	 */
-	*cmdline_p = prepare_command_line();
-
 	/*
 	 * Do some memory reservations *before* memory is added to memblock, so
 	 * memblock allocations won't overwrite it.
@@ -902,6 +860,36 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = __pa_symbol(__bss_start);
 	bss_resource.end = __pa_symbol(__bss_stop)-1;
 
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	if (builtin_cmdline[0]) {
+		/* append boot loader cmdline to builtin */
+		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+#endif
+#endif
+
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	/*
+	 * x86_configure_nx() is called before parse_early_param() to detect
+	 * whether hardware doesn't support NX (so that the early EHCI debug
+	 * console setup can safely call set_fixmap()). It may then be called
+	 * again from within noexec_setup() during parsing early parameters
+	 * to honor the respective command line option.
+	 */
+	x86_configure_nx();
+
+	parse_early_param();
+
+	if (efi_enabled(EFI_BOOT))
+		efi_memblock_x86_reserve_range();
+
 #ifdef CONFIG_MEMORY_HOTPLUG
 	/*
 	 * Memory used by the kernel cannot be hot-removed because Linux

arch/x86/kvm/mmu/tdp_iter.c

@@ -26,6 +26,7 @@ static gfn_t round_gfn_for_level(gfn_t gfn, int level)
  */
 void tdp_iter_restart(struct tdp_iter *iter)
 {
+	iter->yielded = false;
 	iter->yielded_gfn = iter->next_last_level_gfn;
 	iter->level = iter->root_level;
 
@@ -160,6 +161,11 @@ static bool try_step_up(struct tdp_iter *iter)
  */
 void tdp_iter_next(struct tdp_iter *iter)
 {
+	if (iter->yielded) {
+		tdp_iter_restart(iter);
+		return;
+	}
+
 	if (try_step_down(iter))
 		return;
 

arch/x86/kvm/mmu/tdp_iter.h

@@ -45,6 +45,12 @@ struct tdp_iter {
 	 * iterator walks off the end of the paging structure.
 	 */
 	bool valid;
+	/*
+	 * True if KVM dropped mmu_lock and yielded in the middle of a walk, in
+	 * which case tdp_iter_next() needs to restart the walk at the root
+	 * level instead of advancing to the next entry.
+	 */
+	bool yielded;
 };
 
 /*