virtio_pci: Support surprise removal of virtio pci device

[ Upstream commit 43bb40c ]

When a virtio pci device undergo surprise removal (aka async removal in
PCIe spec), mark the device as broken so that any upper layer drivers can
abort any outstanding operation.

When a virtio net pci device undergo surprise removal which is used by a
NetworkManager, a below call trace was observed.

kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059]
watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059]
CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S      W I  L    5.13.0-hotplug+ #8
Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020
Workqueue: events linkwatch_event
RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net]
Call Trace:
 virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net]
 ? __hw_addr_create_ex+0x85/0xc0
 __dev_mc_add+0x72/0x80
 igmp6_group_added+0xa7/0xd0
 ipv6_mc_up+0x3c/0x60
 ipv6_find_idev+0x36/0x80
 addrconf_add_dev+0x1e/0xa0
 addrconf_dev_config+0x71/0x130
 addrconf_notify+0x1f5/0xb40
 ? rtnl_is_locked+0x11/0x20
 ? __switch_to_asm+0x42/0x70
 ? finish_task_switch+0xaf/0x2c0
 ? raw_notifier_call_chain+0x3e/0x50
 raw_notifier_call_chain+0x3e/0x50
 netdev_state_change+0x67/0x90
 linkwatch_do_dev+0x3c/0x50
 __linkwatch_run_queue+0xd2/0x220
 linkwatch_event+0x21/0x30
 process_one_work+0x1c8/0x370
 worker_thread+0x30/0x380
 ? process_one_work+0x370/0x370
 kthread+0x118/0x140
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30

Hence, add the ability to abort the command on surprise removal
which prevents infinite loop and system lockup.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210721142648.1525924-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/virtio/virtio_pci_common.c

@@ -576,6 +576,13 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
 	struct device *dev = get_device(&vp_dev->vdev.dev);
 
+	/*
+	 * Device is marked broken on surprise removal so that virtio upper
+	 * layers can abort any ongoing operation.
+	 */
+	if (!pci_device_is_present(pci_dev))
+		virtio_break_device(&vp_dev->vdev);
+
 	pci_disable_sriov(pci_dev);
 
 	unregister_virtio_device(&vp_dev->vdev);