net: dsa: lan9303: add VLAN IDs to master device

If the master device does VLAN filtering, the IDs used by the switch
must be added for any frames to be received.  Do this in the
port_enable() function, and remove them in port_disable().

Fixes: a129259 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/dsa/Kconfig

@@ -82,6 +82,7 @@ config NET_DSA_REALTEK_SMI
 
 config NET_DSA_SMSC_LAN9303
 	tristate
+	depends on VLAN_8021Q || VLAN_8021Q=n
 	select NET_DSA_TAG_LAN9303
 	select REGMAP
 	help

drivers/net/dsa/lan9303-core.c

@@ -10,6 +10,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 
 #include "lan9303.h"
@@ -1083,21 +1084,27 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port,
 static int lan9303_port_enable(struct dsa_switch *ds, int port,
 			       struct phy_device *phy)
 {
+	struct dsa_port *dp = dsa_to_port(ds, port);
 	struct lan9303 *chip = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
+	if (!dsa_port_is_user(dp))
 		return 0;
 
+	vlan_vid_add(dp->cpu_dp->master, htons(ETH_P_8021Q), port);
+
 	return lan9303_enable_processing_port(chip, port);
 }
 
 static void lan9303_port_disable(struct dsa_switch *ds, int port)
 {
+	struct dsa_port *dp = dsa_to_port(ds, port);
 	struct lan9303 *chip = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
+	if (!dsa_port_is_user(dp))
 		return;
 
+	vlan_vid_del(dp->cpu_dp->master, htons(ETH_P_8021Q), port);
+
 	lan9303_disable_processing_port(chip, port);
 	lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
 }