Merge tag 'v6.1.53' into 6.1

This is the 6.1.53 stable release

Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo

@@ -5,6 +5,6 @@ Description:
 		Indicates whether or not this SBE device has experienced a
 		timeout; i.e. the SBE did not respond within the time allotted
 		by the driver. A value of 1 indicates that a timeout has
-		ocurred and no transfers have completed since the timeout. A
-		value of 0 indicates that no timeout has ocurred, or if one
-		has, more recent transfers have completed successful.
+		occurred and no transfers have completed since the timeout. A
+		value of 0 indicates that no timeout has occurred, or if one
+		has, more recent transfers have completed successfully.

Documentation/ABI/testing/sysfs-driver-chromeos-acpi

@@ -134,4 +134,4 @@ KernelVersion:	5.19
 Description:
 		Returns the verified boot data block shared between the
 		firmware verification step and the kernel verification step
-		(binary).
+		(hex dump).

Documentation/devicetree/bindings/extcon/maxim,max77843.yaml

@@ -23,6 +23,7 @@ properties:
 
   connector:
     $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports

Documentation/scsi/scsi_mid_low_api.rst

@@ -1190,11 +1190,11 @@ Members of interest:
 		 - pointer to scsi_device object that this command is
                    associated with.
     resid
-		 - an LLD should set this signed integer to the requested
+		 - an LLD should set this unsigned integer to the requested
                    transfer length (i.e. 'request_bufflen') less the number
                    of bytes that are actually transferred. 'resid' is
                    preset to 0 so an LLD can ignore it if it cannot detect
-                   underruns (overruns should be rare). If possible an LLD
+                   underruns (overruns should not be reported). An LLD
                    should set 'resid' prior to invoking 'done'. The most
                    interesting case is data transfers from a SCSI target
                    device (e.g. READs) that underrun.

Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst

@@ -2923,6 +2923,13 @@ This structure contains all loop filter related parameters. See sections
       - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocLtCurr as described in section 8.3.2 "Decoding process for reference
         picture set": provides the index of the long term references in DPB array.
+    * - __u8
+      - ``num_delta_pocs_of_ref_rps_idx``
+      - When the short_term_ref_pic_set_sps_flag in the slice header is equal to 0,
+        it is the same as the derived value NumDeltaPocs[RefRpsIdx]. It can be used to parse
+        the RPS data in slice headers instead of skipping it with @short_term_ref_pic_set_size.
+        When the value of short_term_ref_pic_set_sps_flag in the slice header is
+        equal to 1, num_delta_pocs_of_ref_rps_idx shall be set to 0.
     * - struct :c:type:`v4l2_hevc_dpb_entry`
       - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - The decoded picture buffer, for meta-data about reference frames.

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 52
+SUBLEVEL = 53
 EXTRAVERSION =
 NAME = Curry Ramen
 
@@ -1434,7 +1434,7 @@ prepare0: archprepare
 # All the preparing..
 prepare: prepare0
 ifdef CONFIG_RUST
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
 	$(Q)$(MAKE) $(build)=rust
 endif
 
@@ -1960,7 +1960,7 @@ $(DOC_TARGETS):
 # "Is Rust available?" target
 PHONY += rustavailable
 rustavailable:
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v && echo "Rust is available!"
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!"
 
 # Documentation target
 #

arch/arm/boot/dts/Makefile

@@ -331,6 +331,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-iconnect.dtb \
 	kirkwood-iomega_ix2_200.dtb \
 	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-l-50.dtb \
 	kirkwood-laplug.dtb \
@@ -861,7 +862,10 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-craneboard.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
+	logicpd-torpedo-35xx-devkit.dtb \
 	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-torpedo-37xx-devkit-28.dtb \
+	logicpd-som-lv-35xx-devkit.dtb \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
@@ -1527,6 +1531,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-388-helios4.dtb \
 	armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
 	armada-398-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
@@ -1556,6 +1562,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt2701-evb.dtb \
 	mt6580-evbp1.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
 	mt6589-aquaris5.dtb \
 	mt6589-fairphone-fp1.dtb \
 	mt6592-evb.dtb \
@@ -1608,6 +1615,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
 	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \

arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts

@@ -46,3 +46,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};

arch/arm/boot/dts/bcm47189-luxul-xap-810.dts

@@ -83,3 +83,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};

arch/arm/boot/dts/bcm47189-tenda-ac9.dts

@@ -135,8 +135,8 @@
 			label = "lan4";
 		};
 
-		port@5 {
-			reg = <5>;
+		port@8 {
+			reg = <8>;
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};

arch/arm/boot/dts/bcm53573.dtsi

@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
@@ -156,8 +159,6 @@
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm947189acdbmr.dts

@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/imx7s.dtsi

@@ -1184,6 +1184,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1198,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1212,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/qcom-ipq4019.dtsi

@@ -228,9 +228,12 @@
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/s3c6410-mini6410.dts

@@ -51,7 +51,7 @@
 
 		ethernet@18000000 {
 			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
 			interrupt-parent = <&gpn>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			davicom,no-eeprom;

arch/arm/boot/dts/s5pv210-smdkv210.dts

@@ -41,7 +41,7 @@
 
 	ethernet@a8000000 {
 		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
 		interrupt-parent = <&gph1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 		local-mac-address = [00 00 de ad be ef];
@@ -55,6 +55,14 @@
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_out>;
+		power-supply = <&dc5v_reg>;
+	};
+
+	dc5v_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "DC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 

arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi

@@ -68,11 +68,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@dc000000 {
-			reg = <0xdc000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led: gpio_leds {
@@ -102,9 +97,11 @@
 	adc1: adc@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&adc1_in6_pins_a>;
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <6>;
 		status = "disabled";
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 
 	adc2: adc@100 {
@@ -173,7 +170,7 @@
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -183,10 +180,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -375,8 +368,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	interrupt-names = "wdg";

arch/arm/boot/dts/stm32mp157c-ev1.dts

@@ -144,7 +144,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";

arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts

@@ -112,7 +112,7 @@
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi

@@ -62,11 +62,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -80,11 +75,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -240,8 +230,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";

arch/arm/boot/dts/stm32mp157c-odyssey.dts

@@ -41,7 +41,7 @@
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";