serial: 8250: Request full 16550A feature probing for OxSemi PCIe dev…

…ices

commit 00b7a4d upstream.

Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.

Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.

Fixes: 366f6c9 ("serial: 8250: Add proper clock handling for OxSemi PCIe devices")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_pci.c

@@ -1232,13 +1232,18 @@ static void pci_oxsemi_tornado_set_mctrl(struct uart_port *port,
 	serial8250_do_set_mctrl(port, mctrl);
 }
 
+/*
+ * We require EFR features for clock programming, so set UPF_FULL_PROBE
+ * for full probing regardless of CONFIG_SERIAL_8250_16550A_VARIANTS setting.
+ */
 static int pci_oxsemi_tornado_setup(struct serial_private *priv,
 				    const struct pciserial_board *board,
 				    struct uart_8250_port *up, int idx)
 {
 	struct pci_dev *dev = priv->dev;
 
 	if (pci_oxsemi_tornado_p(dev)) {
+		up->port.flags |= UPF_FULL_PROBE;
 		up->port.get_divisor = pci_oxsemi_tornado_get_divisor;
 		up->port.set_divisor = pci_oxsemi_tornado_set_divisor;
 		up->port.set_mctrl = pci_oxsemi_tornado_set_mctrl;