[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/ata/Kconfig

@@ -145,6 +145,340 @@ config SATA_INTEL_COMBINED
 	depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
 	default y
 
+config PATA_ALI
+	tristate "ALi PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the ALi ATA interfaces
+	  found on the many ALi chipsets.
+
+	  If unsure, say N.
+
+config PATA_AMD
+	tristate "AMD/NVidia PATA support (Experimental)"
+	depends on PCI
+	help
+	  This option enables support for the AMD and NVidia PATA
+	  interfaces found on the chipsets for Athlon/Athlon64.
+
+	  If unsure, say N.
+
+config PATA_ARTOP
+	tristate "ARTOP 6210/6260 PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for ARTOP PATA controllers.
+
+	  If unsure, say N.
+
+config PATA_ATIIXP
+	tristate "ATI PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the ATI ATA interfaces
+	  found on the many ATI chipsets.
+
+	  If unsure, say N.
+
+config PATA_CMD64X
+	tristate "CMD64x PATA support (Very Experimental)"
+	depends on PCI&& EXPERIMENTAL
+	help
+	  This option enables support for the CMD64x series chips
+	  except for the CMD640.
+
+	  If unsure, say N.
+
+config PATA_CS5520
+	tristate "CS5510/5520 PATA support"
+	depends on PCI
+	help
+	  This option enables support for the Cyrix 5510/5520
+	  companion chip used with the MediaGX/Geode processor family.
+
+	  If unsure, say N.
+
+config PATA_CS5530
+	tristate "CS5530 PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the Cyrix/NatSemi/AMD CS5530
+	  companion chip used with the MediaGX/Geode processor family.
+
+	  If unsure, say N.
+
+config PATA_CS5535
+	tristate "CS5535 PATA support (Experimental)"
+	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+	help
+	  This option enables support for the NatSemi/AMD CS5535
+	  companion chip used with the Geode processor family.
+
+	  If unsure, say N.
+
+config PATA_CYPRESS
+	tristate "Cypress CY82C693 PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the Cypress/Contaq CY82C693
+	  chipset found in some Alpha systems
+
+	  If unsure, say N.
+
+config PATA_EFAR
+	tristate "EFAR SLC90E66 support"
+	depends on PCI
+	help
+	  This option enables support for the EFAR SLC90E66
+	  IDE controller found on some older machines.
+
+	  If unsure, say N.
+
+config ATA_GENERIC
+	tristate "Generic ATA support"
+	depends on PCI
+	help
+	  This option enables support for generic BIOS configured
+	  ATA controllers via the new ATA layer
+
+	  If unsure, say N.
+
+config PATA_HPT366
+	tristate "HPT 366/368 PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the HPT 366 and 368
+	  PATA controllers via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_HPT37X
+	tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the majority of the later HPT
+	  PATA controllers via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_HPT3X2N
+	tristate "HPT 372N/302N PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the N variant HPT PATA
+	  controllers via the new ATA layer
+
+	  If unsure, say N.
+
+config PATA_HPT3X3
+	tristate "HPT 343/363 PATA support (Experimental)"
+	depends on PCI
+	help
+	  This option enables support for the HPT 343/363
+	  PATA controllers via the new ATA layer
+
+	  If unsure, say N.
+
+config PATA_ISAPNP
+	tristate "ISA Plug and Play PATA support (Very Experimental)"
+	depends on EXPERIMENTAL && ISAPNP
+	help
+	  This option enables support for ISA plug & play ATA
+	  controllers such as those found on old soundcards.
+
+	  If unsure, say N.
+
+config PATA_IT8172
+	tristate "IT8172 PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the ITE 8172 PATA controller
+	  via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_IT821X
+	tristate "IT821x PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the ITE 8211 and 8212
+	  PATA controllers via the new ATA layer, including RAID
+	  mode.
+
+	  If unsure, say N.
+
+config PATA_LEGACY
+	tristate "Legacy ISA PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for ISA/VLB bus legacy PATA
+	  ports and allows them to be accessed via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_TRIFLEX
+	tristate "Compaq Triflex PATA support"
+	depends on PCI
+	help
+	  Enable support for the Compaq 'Triflex' IDE controller as found
+	  on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_MPIIX
+	tristate "Intel PATA MPIIX support"
+	depends on PCI
+	help
+	  This option enables support for MPIIX PATA support.
+
+	  If unsure, say N.
+
+config PATA_OLDPIIX
+	tristate "Intel PATA old PIIX support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for old(?) PIIX PATA support.
+
+	  If unsure, say N.
+
+config PATA_NETCELL
+	tristate "NETCELL Revolution RAID support"
+	depends on PCI
+	help
+	  This option enables support for the Netcell Revolution RAID
+	  PATA controller.
+
+	  If unsure, say N.
+
+config PATA_NS87410
+	tristate "Nat Semi NS87410 PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the National Semiconductor
+	  NS87410 PCI-IDE controller.
+
+	  If unsure, say N.
+
+config PATA_OPTI
+	tristate "OPTI621/6215 PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables full PIO support for the early Opti ATA
+	  controllers found on some old motherboards.
+
+	  If unsure, say N.
+
+config PATA_OPTIDMA
+	tristate "OPTI FireStar PATA support (Veyr Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables DMA/PIO support for the later OPTi
+	  controllers found on some old motherboards and in some
+	  latops
+
+	  If unsure, say N.
+
+config PATA_PCMCIA
+	tristate "PCMCIA PATA support"
+	depends on PCMCIA
+	help
+	  This option enables support for PCMCIA ATA interfaces, including
+	  compact flash card adapters via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_PDC_OLD
+	tristate "Older Promise PATA controller support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the Promise 20246, 20262, 20263,
+	  20265 and 20267 adapters.
+
+	  If unsure, say N.
+
+config PATA_QDI
+	tristate "QDI VLB PATA support"
+	help
+	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
+
+config PATA_RADISYS
+	tristate "RADISYS 82600 PATA support (Very experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the RADISYS 82600
+	  PATA controllers via the new ATA layer
+
+	  If unsure, say N.
+
+config PATA_RZ1000
+	tristate "PC Tech RZ1000 PATA support"
+	depends on PCI
+	help
+	  This option enables basic support for the PC Tech RZ1000/1
+	  PATA controllers via the new ATA layer
+
+	  If unsure, say N.
+
+config PATA_SC1200
+	tristate "SC1200 PATA support (Raving Lunatic)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the NatSemi/AMD SC1200 SoC
+	  companion chip used with the Geode processor family.
+
+	  If unsure, say N.
+
+config PATA_SERVERWORKS
+	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
+	  HT1000 PATA controllers, via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_PDC2027X
+	tristate "Promise PATA 2027x support"
+	depends on PCI
+	help
+	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+
+	  If unsure, say N.
+
+config PATA_SIL680
+	tristate "CMD / Silicon Image 680 PATA support"
+	depends on PCI
+	help
+	  This option enables support for CMD / Silicon Image 680 PATA.
+
+	  If unsure, say N.
+
+config PATA_SIS
+	tristate "SiS PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for SiS PATA controllers
+
+	  If unsure, say N.
+
+config PATA_VIA
+	tristate "VIA PATA support"
+	depends on PCI
+	help
+	  This option enables support for the VIA PATA interfaces
+	  found on the many VIA chipsets.
+
+	  If unsure, say N.
+
+config PATA_WINBOND
+	tristate "Winbond SL82C105 PATA support"
+	depends on PCI
+	help
+	  This option enables support for SL82C105 PATA devices found in the
+	  Netwinder and some other systems
+
+	  If unsure, say N.
+
 endif
 endmenu
 

drivers/ata/Makefile

@@ -17,5 +17,46 @@ obj-$(CONFIG_SATA_ULI)		+= sata_uli.o
 obj-$(CONFIG_SATA_MV)		+= sata_mv.o
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
 
+obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
+obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
+obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
+obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
+obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
+obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
+obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
+obj-$(CONFIG_PATA_CS5535)	+= pata_cs5535.o
+obj-$(CONFIG_PATA_CYPRESS)	+= pata_cypress.o
+obj-$(CONFIG_PATA_EFAR)		+= pata_efar.o
+obj-$(CONFIG_PATA_HPT366)	+= pata_hpt366.o
+obj-$(CONFIG_PATA_HPT37X)	+= pata_hpt37x.o
+obj-$(CONFIG_PATA_HPT3X2N)	+= pata_hpt3x2n.o
+obj-$(CONFIG_PATA_HPT3X3)	+= pata_hpt3x3.o
+obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
+obj-$(CONFIG_PATA_IT8172)	+= pata_it8172.o
+obj-$(CONFIG_PATA_IT821X)	+= pata_it821x.o
+obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
+obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
+obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
+obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
+obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
+obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
+obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
+obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
+obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
+obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
+obj-$(CONFIG_PATA_RADISYS)	+= pata_radisys.o
+obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
+obj-$(CONFIG_PATA_SC1200)	+= pata_sc1200.o
+obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
+obj-$(CONFIG_PATA_SIL680)	+= pata_sil680.o
+obj-$(CONFIG_PATA_VIA)		+= pata_via.o
+obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
+obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
+obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
+# Should be last but one libata driver
+obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
+# Should be last libata driver
+obj-$(CONFIG_PATA_LEGACY)	+= pata_legacy.o
+
 libata-objs	:= libata-core.o libata-scsi.o libata-sff.o libata-eh.o