leds: lm355x: avoid enum conversion warning

[ Upstream commit 985b1f5 ]

clang points out that doing arithmetic between diffent enums is usually
a mistake:

drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~

In this driver, it is intentional, so add a cast to hide the false-positive
warning. It appears to be the only instance of this warning at the moment.

Fixes: b98d13c ("leds: Add new LED driver for lm355x chips")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/leds/leds-lm355x.c

@@ -165,18 +165,19 @@ static int lm355x_chip_init(struct lm355x_chip_data *chip)
 	/* input and output pins configuration */
 	switch (chip->type) {
 	case CHIP_LM3554:
-		reg_val = pdata->pin_tx2 | pdata->ntc_pin;
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin;
 		ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
 		if (ret < 0)
 			goto out;
-		reg_val = pdata->pass_mode;
+		reg_val = (u32)pdata->pass_mode;
 		ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
 		if (ret < 0)
 			goto out;
 		break;
 
 	case CHIP_LM3556:
-		reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin |
+		          (u32)pdata->pass_mode;
 		ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
 		if (ret < 0)
 			goto out;