Merge tag 'v5.13.4' into 5.13-cacule

This is the 5.13.4 stable release
xanmod · Jul 20, 2021 · 83032e0 · 83032e0
2 parents 6e5b36a + 64376a9
commit 83032e0
Show file tree

Hide file tree

Showing 379 changed files with 5,440 additions and 2,844 deletions.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -73,7 +73,7 @@ i2c0: i2c@f8034600 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";

diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -89,7 +89,7 @@ examples:
         reg = <0x36>;
         maxim,alert-low-soc-level = <10>;
         interrupt-parent = <&gpio7>;
-        interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
         wakeup-source;
       };
     };
diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst
@@ -717,10 +717,10 @@ users.
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_NOT_SET
-                      HOT_NODE                 "
-                      WARM_NODE                "
-                      COLD_NODE                "
+N/A                   META                     WRITE_LIFE_NOT_SET
+N/A                   HOT_NODE                 "
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                "
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
@@ -746,10 +746,10 @@ WRITE_LIFE_LONG       "                        WRITE_LIFE_LONG
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_MEDIUM;
-                      HOT_NODE                 WRITE_LIFE_NOT_SET
-                      WARM_NODE                "
-                      COLD_NODE                WRITE_LIFE_NONE
+N/A                   META                     WRITE_LIFE_MEDIUM;
+N/A                   HOT_NODE                 WRITE_LIFE_NOT_SET
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                WRITE_LIFE_NONE
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 13
-SUBLEVEL = 3
+SUBLEVEL = 4
 EXTRAVERSION =
 NAME = Opossums on Parade
 
@@ -129,6 +129,11 @@ endif
 $(if $(word 2, $(KBUILD_EXTMOD)), \
 	$(error building multiple external modules is not supported))
 
+# Remove trailing slashes
+ifneq ($(filter %/, $(KBUILD_EXTMOD)),)
+KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).)
+endif
+
 export KBUILD_EXTMOD
 
 # Kbuild will save output files in the current working directory.

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -496,7 +496,7 @@ status = "okay";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	/* WLS1271 WiFi */
 	wlcore: wlcore@1 {
 		compatible = "ti,wl1271";

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -860,15 +860,15 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi0_pins_default>;
 	pinctrl-1 = <&spi0_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &spi1 {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi1_pins_default>;
 	pinctrl-1 = <&spi1_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &usb2_phy1 {

diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
@@ -17,17 +17,13 @@
  * VCP1, VCP2
  * MLB
  * ISS
- * USB3, USB4
+ * USB3
  */
 
 &usb3_tm {
 	status = "disabled";
 };
 
-&usb4_tm {
-	status = "disabled";
-};
-
 &atl_tm {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "otg";
-	g-rx-fifo-size = <558>;
+	g-rx-fifo-size = <256>;
 	g-np-tx-fifo-size = <32>;
 	/*
 	 * According to dwc2 the sum of all device EP

diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "peripheral";
-	g-rx-fifo-size = <558>;
+	g-rx-fifo-size = <256>;
 	g-np-tx-fifo-size = <32>;
 	g-tx-fifo-size = <256 256 512 512 512 768 768>;
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -520,27 +520,27 @@
 		      <0x1811b408 0x004>,
 		      <0x180293a0 0x01c>;
 		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
 				  "spi_lr_session_aborted",
 				  "spi_lr_impatient",
 				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
+				  "spi_lr_overread";
 		clocks = <&iprocmed>;
 		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		spi_nor: spi-nor@0 {
+		spi_nor: flash@0 {
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4129,28 +4129,6 @@
 			};
 		};
 
-		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x140000 0x4>,
-			      <0x140010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0x20000>;
-		};
-
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x170010 0x4>;

diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
@@ -11,7 +11,3 @@
 &rtctarget {
 	status = "disabled";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
@@ -108,7 +108,3 @@
 &pcie2_rc {
 	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
@@ -49,49 +49,6 @@
 			reg = <0x41500000 0x100>;
 		};
 
-		target-module@48940000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x48940000 0x4>,
-			      <0x48940010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48940000 0x20000>;
-
-			omap_dwc3_4: omap_dwc3_4@0 {
-				compatible = "ti,dwc3";
-				reg = <0 0x10000>;
-				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges;
-				status = "disabled";
-				usb4: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-				};
-			};
-		};
 
 		target-module@41501000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
@@ -224,3 +181,52 @@
 &pcie2_rc {
 	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
 };
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -22,7 +22,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -24,7 +24,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -22,15 +22,15 @@
 			 * Green LED is much brighter than the others
 			 * so limit its max brightness
 			 */
-			max_brightness = <127>;
+			max-brightness = <127>;
 			linux,default-trigger = "mmc0";
 		};
 
 		led-2 {
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -125,18 +125,6 @@
 			};
 		};
 
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
 		usb@68000000 {
 			status = "okay";
 		};