Merge tag 'v5.15.15' into 5.15

This is the 5.15.15 stable release

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 14
+SUBLEVEL = 15
 EXTRAVERSION =
 NAME = Trick or Treat
 

arch/arm/boot/dts/exynos4210-i9100.dts

@@ -827,7 +827,7 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};

arch/s390/kernel/machine_kexec_file.c

@@ -312,6 +312,10 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 		addr = section->sh_addr + relas[i].r_offset;
 
 		r_type = ELF64_R_TYPE(relas[i].r_info);
+
+		if (r_type == R_390_PLT32DBL)
+			r_type = R_390_PC32DBL;
+
 		ret = arch_kexec_do_relocs(r_type, loc, val, addr);
 		if (ret) {
 			pr_err("Unknown rela relocation: %d\n", r_type);

drivers/bluetooth/bfusb.c

@@ -628,6 +628,9 @@ static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 	data->bulk_out_ep   = bulk_out_ep->desc.bEndpointAddress;
 	data->bulk_pkt_size = le16_to_cpu(bulk_out_ep->desc.wMaxPacketSize);
 
+	if (!data->bulk_pkt_size)
+		goto done;
+
 	rwlock_init(&data->lock);
 
 	data->reassembly = NULL;

drivers/bluetooth/btbcm.c

@@ -8,6 +8,7 @@
 
 #include <linux/module.h>
 #include <linux/firmware.h>
+#include <linux/dmi.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -343,6 +344,52 @@ static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
 	return skb;
 }
 
+static const struct dmi_system_id disable_broken_read_transmit_power[] = {
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,2"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,4"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,2"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac20,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac20,2"),
+		},
+	},
+	{ }
+};
+
 static int btbcm_read_info(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -363,6 +410,10 @@ static int btbcm_read_info(struct hci_dev *hdev)
 	bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]);
 	kfree_skb(skb);
 
+	/* Read DMI and disable broken Read LE Min/Max Tx Power */
+	if (dmi_first_match(disable_broken_read_transmit_power))
+		set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
+
 	return 0;
 }
 

drivers/bluetooth/btintel.c

@@ -2193,8 +2193,15 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 	 * As a workaround, send HCI Reset command first which will reset the
 	 * number of completed commands and allow normal command processing
 	 * from now on.
+	 *
+	 * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe
+	 * in the SW_RFKILL ON state as a workaround of fixing LED issue during
+	 * the shutdown() procedure, and once the device is in SW_RFKILL ON
+	 * state, the only way to exit out of it is sending the HCI_Reset
+	 * command.
 	 */
-	if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD)) {
+	if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) ||
+	    btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
 		skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
 				     HCI_INIT_TIMEOUT);
 		if (IS_ERR(skb)) {
@@ -2263,12 +2270,6 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 				set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
 					&hdev->quirks);
 
-			/* These devices have an issue with LED which doesn't
-			 * go off immediately during shutdown. Set the flag
-			 * here to send the LED OFF command during shutdown.
-			 */
-			btintel_set_flag(hdev, INTEL_BROKEN_LED);
-
 			err = btintel_legacy_rom_setup(hdev, &ver);
 			break;
 		case 0x0b:      /* SfP */
@@ -2399,9 +2400,10 @@ static int btintel_shutdown_combined(struct hci_dev *hdev)
 
 	/* Some platforms have an issue with BT LED when the interface is
 	 * down or BT radio is turned off, which takes 5 seconds to BT LED
-	 * goes off. This command turns off the BT LED immediately.
+	 * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the
+	 * device in the RFKILL ON state which turns off the BT LED immediately.
 	 */
-	if (btintel_test_flag(hdev, INTEL_BROKEN_LED)) {
+	if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
 		skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
 		if (IS_ERR(skb)) {
 			ret = PTR_ERR(skb);

drivers/bluetooth/btintel.h

@@ -145,7 +145,7 @@ enum {
 	INTEL_FIRMWARE_FAILED,
 	INTEL_BOOTING,
 	INTEL_BROKEN_INITIAL_NCMD,
-	INTEL_BROKEN_LED,
+	INTEL_BROKEN_SHUTDOWN_LED,
 	INTEL_ROM_LEGACY,
 
 	__INTEL_NUM_FLAGS,

drivers/bluetooth/btusb.c

@@ -59,6 +59,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_WIDEBAND_SPEECH	0x400000
 #define BTUSB_VALID_LE_STATES   0x800000
 #define BTUSB_QCA_WCN6855	0x1000000
+#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED	0x2000000
 #define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
 
 static const struct usb_device_id btusb_table[] = {
@@ -295,6 +296,24 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0cc), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d6), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e3), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9309), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@@ -365,10 +384,13 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_INTEL_BROKEN_INITIAL_NCMD },
-	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
+						     BTUSB_INTEL_BROKEN_INITIAL_NCMD |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
 	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
-	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
 	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED },
 
 	/* Other Intel Bluetooth devices */
@@ -384,6 +406,14 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Realtek 8852AE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
@@ -410,10 +440,21 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3563), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 	{ USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
 
+	/* MediaTek MT7922A Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
 	/* Additional Realtek 8723AE Bluetooth devices */
 	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
@@ -455,10 +496,6 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Additional Realtek 8822CE Bluetooth devices */
 	{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
-	/* Bluetooth component of Realtek 8852AE device */
-	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
-						     BTUSB_WIDEBAND_SPEECH },
-
 	{ USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |
@@ -2221,6 +2258,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 		skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
 		if (!skb) {
 			hdev->stat.err_rx++;
+			kfree(urb->setup_packet);
 			return;
 		}
 
@@ -2241,6 +2279,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 			data->evt_skb = skb_clone(skb, GFP_ATOMIC);
 			if (!data->evt_skb) {
 				kfree_skb(skb);
+				kfree(urb->setup_packet);
 				return;
 			}
 		}
@@ -2249,6 +2288,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 		if (err < 0) {
 			kfree_skb(data->evt_skb);
 			data->evt_skb = NULL;
+			kfree(urb->setup_packet);
 			return;
 		}
 
@@ -2259,6 +2299,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 			wake_up_bit(&data->flags,
 				    BTUSB_TX_WAIT_VND_EVT);
 		}
+		kfree(urb->setup_packet);
 		return;
 	} else if (urb->status == -ENOENT) {
 		/* Avoid suspend failed when usb_kill_urb */
@@ -2279,6 +2320,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 	usb_anchor_urb(urb, &data->ctrl_anchor);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
+		kfree(urb->setup_packet);
 		/* -EPERM: urb is being killed;
 		 * -ENODEV: device got disconnected
 		 */
@@ -2808,6 +2850,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	case 0x7668:
 		fwname = FIRMWARE_MT7668;
 		break;
+	case 0x7922:
 	case 0x7961:
 		snprintf(fw_bin_name, sizeof(fw_bin_name),
 			"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
@@ -2832,6 +2875,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		}
 
 		hci_set_msft_opcode(hdev, 0xFD30);
+		hci_set_aosp_capable(hdev);
 		goto done;
 	default:
 		bt_dev_err(hdev, "Unsupported hardware variant (%08x)",
@@ -3812,6 +3856,9 @@ static int btusb_probe(struct usb_interface *intf,
 
 		if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
 			btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED)
+			btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED);
 	}
 
 	if (id->driver_info & BTUSB_MARVELL)