usb: xhci: do not perform Soft Retry for some xHCI hosts

commit a4a251f upstream.

On some systems rt2800usb and mt7601u devices are unable to operate since
commit f8f80be ("xhci: Use soft retry to recover faster from
transaction errors")

Seems that some xHCI controllers can not perform Soft Retry correctly,
affecting those devices.

To avoid the problem add xhci->quirks flag that restore pre soft retry
xhci behaviour for affected xHCI controllers. Currently those are
AMD_PROMONTORYA_4 and AMD_PROMONTORYA_2, since it was confirmed
by the users: on those xHCI hosts issue happen and is gone after
disabling Soft Retry.

[minor commit message rewording for checkpatch -Mathias]

Fixes: f8f80be ("xhci: Use soft retry to recover faster from transaction errors")
Cc: <stable@vger.kernel.org> # 4.20+
Reported-by: Bernhard <bernhard.gebetsberger@gmx.at>
Tested-by: Bernhard <bernhard.gebetsberger@gmx.at>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202541
Link: https://lore.kernel.org/r/20210311115353.2137560-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-pci.c

@@ -295,6 +295,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == 0x9026)
 		xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
+	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
+		xhci->quirks |= XHCI_NO_SOFT_RETRY;
+
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"QUIRK: Resetting on resume");

drivers/usb/host/xhci-ring.c

@@ -2307,7 +2307,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		remaining	= 0;
 		break;
 	case COMP_USB_TRANSACTION_ERROR:
-		if ((ep_ring->err_count++ > MAX_SOFT_RETRY) ||
+		if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
+		    (ep_ring->err_count++ > MAX_SOFT_RETRY) ||
 		    le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
 			break;
 		*status = 0;

drivers/usb/host/xhci.h

@@ -1883,6 +1883,7 @@ struct xhci_hcd {
 #define XHCI_SKIP_PHY_INIT	BIT_ULL(37)
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
+#define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;