PCI/EDR: Clear Device Status after EDR error recovery

[ Upstream commit c441b1e ]

During EDR recovery, the OS must clear error status of the port that
triggered DPC even if firmware retains control of DPC and AER (see the
implementation note in the PCI Firmware spec r3.3, sec 4.6.12).

Prior to 068c29a ("PCI/ERR: Clear PCIe Device Status errors only if
OS owns AER"), the port Device Status was cleared in this path:

  edr_handle_event
    dpc_process_error(dev)                 # "dev" triggered DPC
    pcie_do_recovery(dev, dpc_reset_link)
      dpc_reset_link                       # exit DPC
      pcie_clear_device_status(dev)        # clear Device Status

After 068c29a, pcie_do_recovery() no longer clears Device Status when
firmware controls AER, so the error bit remains set even after recovery.

Per the "Downstream Port Containment configuration control" bit in the
returned _OSC Control Field (sec 4.5.1), the OS is allowed to clear error
status until it evaluates _OST, so clear Device Status in
edr_handle_event() if the error recovery was successful.

[bhelgaas: commit log]
Fixes: 068c29a ("PCI/ERR: Clear PCIe Device Status errors only if OS owns AER")
Link: https://lore.kernel.org/r/20230315235449.1279209-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Tsaur Erwin <erwin.tsaur@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/pci/pcie/edr.c

@@ -193,6 +193,7 @@ static void edr_handle_event(acpi_handle handle, u32 event, void *data)
 	 */
 	if (estate == PCI_ERS_RESULT_RECOVERED) {
 		pci_dbg(edev, "DPC port successfully recovered\n");
+		pcie_clear_device_status(edev);
 		acpi_send_edr_status(pdev, edev, EDR_OST_SUCCESS);
 	} else {
 		pci_dbg(edev, "DPC port recovery failed\n");