IB/hfi1: Adjust pkey entry in index 0

[ Upstream commit 6200487 ]

It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.

This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack.  This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.

To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.

At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.

Fixes: 7724105 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.com
Suggested-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/infiniband/hw/hfi1/init.c

@@ -650,12 +650,7 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
 
 	ppd->pkeys[default_pkey_idx] = DEFAULT_P_KEY;
 	ppd->part_enforce |= HFI1_PART_ENFORCE_IN;
-
-	if (loopback) {
-		dd_dev_err(dd, "Faking data partition 0x8001 in idx %u\n",
-			   !default_pkey_idx);
-		ppd->pkeys[!default_pkey_idx] = 0x8001;
-	}
+	ppd->pkeys[0] = 0x8001;
 
 	INIT_WORK(&ppd->link_vc_work, handle_verify_cap);
 	INIT_WORK(&ppd->link_up_work, handle_link_up);