i40e: Fix queue-to-TC mapping on Tx

[ Upstream commit 89ec1f0 ]

In SW DCB mode the packets sent receive incorrect UP tags. They are
constructed correctly and put into tx_ring, but UP is later remapped by
HW on the basis of TCTUPR register contents according to Tx queue
selected, and BW used is consistent with the new UP values. This is
caused by Tx queue selection in kernel not taking into account DCB
configuration. This patch fixes the issue by implementing the
ndo_select_queue NDO callback.

Fixes: fd0a05c ("i40e: transmit, receive, and NAPI")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -12809,6 +12809,7 @@ static const struct net_device_ops i40e_netdev_ops = {
 	.ndo_poll_controller	= i40e_netpoll,
 #endif
 	.ndo_setup_tc		= __i40e_setup_tc,
+	.ndo_select_queue	= i40e_lan_select_queue,
 	.ndo_set_features	= i40e_set_features,
 	.ndo_set_vf_mac		= i40e_ndo_set_vf_mac,
 	.ndo_set_vf_vlan	= i40e_ndo_set_vf_port_vlan,

drivers/net/ethernet/intel/i40e/i40e_txrx.c

@@ -3524,6 +3524,56 @@ static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	return -1;
 }
 
+static u16 i40e_swdcb_skb_tx_hash(struct net_device *dev,
+				  const struct sk_buff *skb,
+				  u16 num_tx_queues)
+{
+	u32 jhash_initval_salt = 0xd631614b;
+	u32 hash;
+
+	if (skb->sk && skb->sk->sk_hash)
+		hash = skb->sk->sk_hash;
+	else
+		hash = (__force u16)skb->protocol ^ skb->hash;
+
+	hash = jhash_1word(hash, jhash_initval_salt);
+
+	return (u16)(((u64)hash * num_tx_queues) >> 32);
+}
+
+u16 i40e_lan_select_queue(struct net_device *netdev,
+			  struct sk_buff *skb,
+			  struct net_device __always_unused *sb_dev)
+{
+	struct i40e_netdev_priv *np = netdev_priv(netdev);
+	struct i40e_vsi *vsi = np->vsi;
+	struct i40e_hw *hw;
+	u16 qoffset;
+	u16 qcount;
+	u8 tclass;
+	u16 hash;
+	u8 prio;
+
+	/* is DCB enabled at all? */
+	if (vsi->tc_config.numtc == 1)
+		return i40e_swdcb_skb_tx_hash(netdev, skb,
+					      netdev->real_num_tx_queues);
+
+	prio = skb->priority;
+	hw = &vsi->back->hw;
+	tclass = hw->local_dcbx_config.etscfg.prioritytable[prio];
+	/* sanity check */
+	if (unlikely(!(vsi->tc_config.enabled_tc & BIT(tclass))))
+		tclass = 0;
+
+	/* select a queue assigned for the given TC */
+	qcount = vsi->tc_config.tc_info[tclass].qcount;
+	hash = i40e_swdcb_skb_tx_hash(netdev, skb, qcount);
+
+	qoffset = vsi->tc_config.tc_info[tclass].qoffset;
+	return qoffset + hash;
+}
+
 /**
  * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring
  * @xdpf: data to transmit

drivers/net/ethernet/intel/i40e/i40e_txrx.h

@@ -449,6 +449,8 @@ static inline unsigned int i40e_rx_pg_order(struct i40e_ring *ring)
 
 bool i40e_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count);
 netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+u16 i40e_lan_select_queue(struct net_device *netdev, struct sk_buff *skb,
+			  struct net_device *sb_dev);
 void i40e_clean_tx_ring(struct i40e_ring *tx_ring);
 void i40e_clean_rx_ring(struct i40e_ring *rx_ring);
 int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring);