Skip to content

Commit

Permalink
net: dsa: b53: Fix IMP port setup on BCM5301x
Browse files Browse the repository at this point in the history 
[ Upstream commit 63f8428 ]

Broadcom's b53 switches have one IMP (Inband Management Port) that needs
to be programmed using its own designed register. IMP port may be
different than CPU port - especially on devices with multiple CPU ports.

For that reason it's required to explicitly note IMP port index and
check for it when choosing a register to use.

This commit fixes BCM5301x support. Those switches use CPU port 5 while
their IMP port is 8. Before this patch b53 was trying to program port 5
with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5).

It may be possible to also replace "cpu_port" usages with
dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix.

Fixes: 967dd82 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
  • Loading branch information
@gregkh
Rafał Miłecki authored and gregkh committed Sep 22, 2021
1 parent 4bf5d52 commit c70b2b2
Show file tree
Hide file tree
Showing 2 changed files with 26 additions and 3 deletions.
28 changes: 25 additions & 3 deletions drivers/net/dsa/b53/b53_common.c
View file
Expand Up @@ -1144,7 +1144,7 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
u8 reg, val, off;

/* Override the port settings */
if (port == dev->cpu_port) {
if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
} else {
Expand All @@ -1168,7 +1168,7 @@ static void b53_force_port_config(struct b53_device *dev, int port,
u8 reg, val, off;

/* Override the port settings */
if (port == dev->cpu_port) {
if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
} else {
Expand Down Expand Up @@ -1236,7 +1236,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
b53_force_link(dev, port, phydev->link);

if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
if (port == 8)
if (port == dev->imp_port)
off = B53_RGMII_CTRL_IMP;
else
off = B53_RGMII_CTRL_P(port);
Expand Down Expand Up @@ -2280,6 +2280,7 @@ struct b53_chip_data {
const char *dev_name;
u16 vlans;
u16 enabled_ports;
u8 imp_port;
u8 cpu_port;
u8 vta_regs[3];
u8 arl_bins;
Expand All @@ -2304,6 +2305,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 2,
.arl_buckets = 1024,
.imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
Expand All @@ -2314,6 +2316,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 2,
.arl_buckets = 1024,
.imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
Expand All @@ -2324,6 +2327,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2337,6 +2341,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2350,6 +2355,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2363,6 +2369,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x7f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2377,6 +2384,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.vta_regs = B53_VTA_REGS,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
Expand All @@ -2389,6 +2397,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0xff,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2402,6 +2411,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2415,6 +2425,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0, /* pdata must provide them */
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_63XX,
.duplex_reg = B53_DUPLEX_STAT_63XX,
Expand All @@ -2428,6 +2439,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2441,6 +2453,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2454,6 +2467,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2467,6 +2481,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2480,6 +2495,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2493,6 +2509,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2506,6 +2523,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x103,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2520,6 +2538,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 256,
.imp_port = 8,
.cpu_port = 8, /* TODO: ports 4, 5, 8 */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2533,6 +2552,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2546,6 +2566,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 256,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
Expand All @@ -2571,6 +2592,7 @@ static int b53_switch_init(struct b53_device *dev)
dev->vta_regs[1] = chip->vta_regs[1];
dev->vta_regs[2] = chip->vta_regs[2];
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
dev->imp_port = chip->imp_port;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
dev->num_arl_bins = chip->arl_bins;
Expand Down
1 change: 1 addition & 0 deletions drivers/net/dsa/b53/b53_priv.h
View file
Expand Up @@ -123,6 +123,7 @@ struct b53_device {

/* used ports mask */
u16 enabled_ports;
unsigned int imp_port;
unsigned int cpu_port;

/* connect specific data */
Expand Down

0 comments on commit c70b2b2

Please sign in to comment.