ASoC: tas2770: Insert post reset delay

commit 307f314 upstream.

Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.

Fixes: 1a476ab ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220204095301.5554-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound/soc/codecs/tas2770.c

@@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770_priv *tas2770)
 		gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
 		msleep(20);
 		gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
+		usleep_range(1000, 2000);
 	}
 
 	snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
 		TAS2770_RST);
+	usleep_range(1000, 2000);
 }
 
 static int tas2770_set_bias_level(struct snd_soc_component *component,
@@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct snd_soc_component *component)
 
 	if (tas2770->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+		usleep_range(1000, 2000);
 	} else {
 		ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
 						    TAS2770_PWR_CTRL_MASK,
@@ -510,8 +513,10 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
 
 	tas2770->component = component;
 
-	if (tas2770->sdz_gpio)
+	if (tas2770->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+		usleep_range(1000, 2000);
+	}
 
 	tas2770_reset(tas2770);