Merge tag 'v6.6.1' into 6.6

This is the 6.6.1 stable release

Documentation/devicetree/bindings/serial/rs485.yaml

@@ -29,6 +29,10 @@ properties:
           default: 0
           maximum: 100
 
+  rs485-rts-active-high:
+    description: drive RTS high when sending (this is the default).
+    $ref: /schemas/types.yaml#/definitions/flag
+
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
     $ref: /schemas/types.yaml#/definitions/flag

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 0
+SUBLEVEL = 1
 EXTRAVERSION =
 NAME = Hurr durr I'ma ninja sloth
 

drivers/bluetooth/hci_bcm4377.c

@@ -512,6 +512,7 @@ struct bcm4377_hw {
 	unsigned long disable_aspm : 1;
 	unsigned long broken_ext_scan : 1;
 	unsigned long broken_mws_transport_config : 1;
+	unsigned long broken_le_coded : 1;
 
 	int (*send_calibration)(struct bcm4377_data *bcm4377);
 	int (*send_ptb)(struct bcm4377_data *bcm4377,
@@ -2372,6 +2373,8 @@ static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev->quirks);
 	if (bcm4377->hw->broken_ext_scan)
 		set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
+	if (bcm4377->hw->broken_le_coded)
+		set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks);
 
 	pci_set_drvdata(pdev, bcm4377);
 	hci_set_drvdata(hdev, bcm4377);
@@ -2461,6 +2464,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = {
 		.bar0_core2_window2 = 0x18107000,
 		.has_bar0_core2_window2 = true,
 		.broken_mws_transport_config = true,
+		.broken_le_coded = true,
 		.send_calibration = bcm4378_send_calibration,
 		.send_ptb = bcm4378_send_ptb,
 	},
@@ -2474,6 +2478,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = {
 		.has_bar0_core2_window2 = true,
 		.clear_pciecfg_subsystem_ctrl_bit19 = true,
 		.broken_mws_transport_config = true,
+		.broken_le_coded = true,
 		.send_calibration = bcm4387_send_calibration,
 		.send_ptb = bcm4378_send_ptb,
 	},

drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c

@@ -586,7 +586,8 @@ static void dcn10_dmcu_set_psr_enable(struct dmcu *dmcu, bool enable, bool wait)
 				if (state == PSR_STATE0)
 					break;
 			}
-			fsleep(500);
+			/* must *not* be fsleep - this can be called from high irq levels */
+			udelay(500);
 		}
 
 		/* assert if max retry hit */

drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c

@@ -216,7 +216,8 @@ static void dmub_psr_enable(struct dmub_psr *dmub, bool enable, bool wait, uint8
 					break;
 			}
 
-			fsleep(500);
+			/* must *not* be fsleep - this can be called from high irq levels */
+			udelay(500);
 		}
 
 		/* assert if max retry hit */

drivers/misc/pci_endpoint_test.c

@@ -71,6 +71,7 @@
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
 #define PCI_DEVICE_ID_TI_J7200			0xb00f
 #define PCI_DEVICE_ID_TI_AM64			0xb010
+#define PCI_DEVICE_ID_TI_J721S2		0xb013
 #define PCI_DEVICE_ID_LS1088A			0x80c0
 #define PCI_DEVICE_ID_IMX8			0x0808
 
@@ -999,6 +1000,9 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM64),
 	  .driver_data = (kernel_ulong_t)&j721e_data,
 	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721S2),
+	  .driver_data = (kernel_ulong_t)&j721e_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);

drivers/pci/quirks.c

@@ -690,15 +690,15 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI,	PCI_DEVICE_ID_ATI_RS100,   quirk_ati_
 /*
  * In the AMD NL platform, this device ([1022:7912]) has a class code of
  * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will
- * claim it.
+ * claim it. The same applies on the VanGogh platform device ([1022:163a]).
  *
  * But the dwc3 driver is a more specific driver for this device, and we'd
  * prefer to use it instead of xhci. To prevent xhci from claiming the
  * device, change the class code to 0x0c03fe, which the PCI r3.0 spec
  * defines as "USB device (not host controller)". The dwc3 driver can then
  * claim it based on its Vendor and Device ID.
  */
-static void quirk_amd_nl_class(struct pci_dev *pdev)
+static void quirk_amd_dwc_class(struct pci_dev *pdev)
 {
 	u32 class = pdev->class;
 
@@ -708,7 +708,9 @@ static void quirk_amd_nl_class(struct pci_dev *pdev)
 		 class, pdev->class);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
-		quirk_amd_nl_class);
+		quirk_amd_dwc_class);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VANGOGH_USB,
+		quirk_amd_dwc_class);
 
 /*
  * Synopsys USB 3.x host HAPS platform has a class code of

drivers/power/supply/power_supply_core.c

@@ -29,7 +29,7 @@
 struct class *power_supply_class;
 EXPORT_SYMBOL_GPL(power_supply_class);
 
-ATOMIC_NOTIFIER_HEAD(power_supply_notifier);
+BLOCKING_NOTIFIER_HEAD(power_supply_notifier);
 EXPORT_SYMBOL_GPL(power_supply_notifier);
 
 static struct device_type power_supply_dev_type;
@@ -97,7 +97,7 @@ static void power_supply_changed_work(struct work_struct *work)
 		class_for_each_device(power_supply_class, NULL, psy,
 				      __power_supply_changed_work);
 		power_supply_update_leds(psy);
-		atomic_notifier_call_chain(&power_supply_notifier,
+		blocking_notifier_call_chain(&power_supply_notifier,
 				PSY_EVENT_PROP_CHANGED, psy);
 		kobject_uevent(&psy->dev.kobj, KOBJ_CHANGE);
 		spin_lock_irqsave(&psy->changed_lock, flags);
@@ -1262,13 +1262,13 @@ static void power_supply_dev_release(struct device *dev)
 
 int power_supply_reg_notifier(struct notifier_block *nb)
 {
-	return atomic_notifier_chain_register(&power_supply_notifier, nb);
+	return blocking_notifier_chain_register(&power_supply_notifier, nb);
 }
 EXPORT_SYMBOL_GPL(power_supply_reg_notifier);
 
 void power_supply_unreg_notifier(struct notifier_block *nb)
 {
-	atomic_notifier_chain_unregister(&power_supply_notifier, nb);
+	blocking_notifier_chain_unregister(&power_supply_notifier, nb);
 }
 EXPORT_SYMBOL_GPL(power_supply_unreg_notifier);
 

drivers/tty/n_gsm.c

@@ -4108,6 +4108,8 @@ static int gsm_modem_upd_via_msc(struct gsm_dlci *dlci, u8 brk)
 
 static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk)
 {
+	if (dlci->gsm->dead)
+		return -EL2HLT;
 	if (dlci->adaption == 2) {
 		/* Send convergence layer type 2 empty data frame. */
 		gsm_modem_upd_via_data(dlci, brk);