net: asix: Add in_pm parameter

From: Freddy Xin <freddy@asix.com.tw>

In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.

Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.

Reset HW in resume function to ensure the PHY works correctly.

Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/asix.h

@@ -46,6 +46,7 @@
 #define AX_CMD_SET_SW_MII		0x06
 #define AX_CMD_READ_MII_REG		0x07
 #define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
 #define AX_CMD_SET_HW_MII		0x0a
 #define AX_CMD_READ_EEPROM		0x0b
 #define AX_CMD_WRITE_EEPROM		0x0c
@@ -71,6 +72,17 @@
 #define AX_CMD_SW_RESET			0x20
 #define AX_CMD_SW_PHY_STATUS		0x21
 #define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
 
 #define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
 #define AX_PHY_SELECT_INTERNAL		0
@@ -173,6 +185,10 @@ struct asix_rx_fixup_info {
 };
 
 struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
@@ -182,10 +198,10 @@ extern const struct driver_info ax88172a_info;
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data);
+		  u16 size, void *data, int in_pm);
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data);
+		   u16 size, void *data, int in_pm);
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
 			  u16 index, u16 size, void *data);
@@ -197,27 +213,31 @@ int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
 struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 			      gfp_t flags);
 
-int asix_set_sw_mii(struct usbnet *dev);
-int asix_set_hw_mii(struct usbnet *dev);
+int asix_set_sw_mii(struct usbnet *dev, int in_pm);
+int asix_set_hw_mii(struct usbnet *dev, int in_pm);
 
 int asix_read_phy_addr(struct usbnet *dev, int internal);
 int asix_get_phy_addr(struct usbnet *dev);
 
-int asix_sw_reset(struct usbnet *dev, u8 flags);
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
 
-u16 asix_read_rx_ctl(struct usbnet *dev);
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
 
-u16 asix_read_medium_status(struct usbnet *dev);
-int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
 
 void asix_set_multicast(struct net_device *net);
 
 int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
 void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
 
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
 void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);