arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling

[ Upstream commit a5200e6 ]

Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).

Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode.  This was wrong, as these are meant solely for the
PHY, not for the MAC.  Hence properties were introduced for explicit
configuration of these delays.

Convert the RZ/G2 DTS files from the old to the new scheme:
  - Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
    properties to the SoC .dtsi files, to be overridden by board files
    where needed,
  - Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
    the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
    overrides.

Notes:
  - RZ/G2E does not support TX internal delay handling.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819134344.27813-8-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi

@@ -55,7 +55,8 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {

arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi

@@ -19,7 +19,7 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-txid";
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {

arch/arm64/boot/dts/renesas/r8a774a1.dtsi

@@ -1131,6 +1131,8 @@
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/renesas/r8a774b1.dtsi

@@ -1004,6 +1004,8 @@
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/renesas/r8a774c0.dtsi

@@ -960,6 +960,7 @@
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/renesas/r8a774e1.dtsi

@@ -1233,6 +1233,8 @@
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;