mlxsw: spectrum_ethtool: Add an external speed to PTYS register

commit ae9b24d upstream.

Currently, only external bits are added to the PTYS register, whereas
there is one external bit that is wrongly marked as internal, and so was
recently removed from the register.

Add that bit to the PTYS register again, as this bit is no longer
internal.

Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer
being supported, causing a regression on some setups.

Fixes: 5bf01b5 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reported-by: Eddie Shklaer <eddies@nvidia.com>
Tested-by: Eddie Shklaer <eddies@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -4208,6 +4208,7 @@ MLXSW_ITEM32(reg, ptys, ext_eth_proto_cap, 0x08, 0, 32);
 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4		BIT(20)
 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4		BIT(21)
 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4		BIT(22)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4	BIT(23)
 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR		BIT(27)
 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR		BIT(28)
 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR		BIT(29)

drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c

@@ -1171,6 +1171,11 @@ static const struct mlxsw_sp1_port_link_mode mlxsw_sp1_port_link_mode[] = {
 		.mask_ethtool	= ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT,
 		.speed		= SPEED_100000,
 	},
+	{
+		.mask		= MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4,
+		.mask_ethtool	= ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
+		.speed		= SPEED_100000,
+	},
 };
 
 #define MLXSW_SP1_PORT_LINK_MODE_LEN ARRAY_SIZE(mlxsw_sp1_port_link_mode)

drivers/net/ethernet/mellanox/mlxsw/switchx2.c

@@ -612,7 +612,8 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
 	{
 		.mask		= MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 |
 				  MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 |
-				  MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4,
+				  MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 |
+				  MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4,
 		.speed		= 100000,
 	},
 };