arm64: dts: qcom: sm8450: Fix the msi-map entries

commit ecc3ac2 upstream.

While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.

But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.

Cc: stable@vger.kernel.org # 6.3: bf79e33 ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-1-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -1774,12 +1774,8 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5981 0x1>,
-				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map = <0x0 &gic_its 0x5980 0x1>,
+				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1888,12 +1884,8 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5a01 0x1>,
-				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map = <0x0 &gic_its 0x5a00 0x1>,
+				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";