Merge tag 'v5.10.61' into 5.10

Linux 5.10.61

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 60
+SUBLEVEL = 61
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;

arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
@@ -15,6 +16,9 @@
 	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
+	/* Bullhead firmware doesn't support PSCI */
+	/delete-node/ psci;
+
 	aliases {
 		serial0 = &blsp1_uart2;
 	};

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -564,15 +564,15 @@
 		left_spkr: wsa8810-left{
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
 		};
 
 		right_spkr: wsa8810-right{
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";

arch/s390/pci/pci.c

@@ -558,9 +558,12 @@ static void zpci_cleanup_bus_resources(struct zpci_dev *zdev)
 
 int pcibios_add_device(struct pci_dev *pdev)
 {
+	struct zpci_dev *zdev = to_zpci(pdev);
 	struct resource *res;
 	int i;
 
+	/* The pdev has a reference to the zdev via its bus */
+	zpci_zdev_get(zdev);
 	if (pdev->is_physfn)
 		pdev->no_vf_scan = 1;
 
@@ -580,7 +583,10 @@ int pcibios_add_device(struct pci_dev *pdev)
 
 void pcibios_release_device(struct pci_dev *pdev)
 {
+	struct zpci_dev *zdev = to_zpci(pdev);
+
 	zpci_unmap_resources(pdev);
+	zpci_zdev_put(zdev);
 }
 
 int pcibios_enable_device(struct pci_dev *pdev, int mask)

arch/s390/pci/pci_bus.h

@@ -16,6 +16,11 @@ static inline void zpci_zdev_put(struct zpci_dev *zdev)
 	kref_put(&zdev->kref, zpci_release_device);
 }
 
+static inline void zpci_zdev_get(struct zpci_dev *zdev)
+{
+	kref_get(&zdev->kref);
+}
+
 int zpci_alloc_domain(int domain);
 void zpci_free_domain(int domain);
 int zpci_setup_bus_resources(struct zpci_dev *zdev,

arch/x86/kvm/x86.c

@@ -7023,6 +7023,11 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu)
 	BUILD_BUG_ON(HF_SMM_MASK != X86EMUL_SMM_MASK);
 	BUILD_BUG_ON(HF_SMM_INSIDE_NMI_MASK != X86EMUL_SMM_INSIDE_NMI_MASK);
 
+	ctxt->interruptibility = 0;
+	ctxt->have_exception = false;
+	ctxt->exception.vector = -1;
+	ctxt->perm_ok = false;
+
 	init_decode_cache(ctxt);
 	vcpu->arch.emulate_regs_need_sync_from_vcpu = false;
 }
@@ -7338,6 +7343,37 @@ static bool is_vmware_backdoor_opcode(struct x86_emulate_ctxt *ctxt)
 	return false;
 }
 
+/*
+ * Decode to be emulated instruction. Return EMULATION_OK if success.
+ */
+int x86_decode_emulated_instruction(struct kvm_vcpu *vcpu, int emulation_type,
+				    void *insn, int insn_len)
+{
+	int r = EMULATION_OK;
+	struct x86_emulate_ctxt *ctxt = vcpu->arch.emulate_ctxt;
+
+	init_emulate_ctxt(vcpu);
+
+	/*
+	 * We will reenter on the same instruction since we do not set
+	 * complete_userspace_io. This does not handle watchpoints yet,
+	 * those would be handled in the emulate_ops.
+	 */
+	if (!(emulation_type & EMULTYPE_SKIP) &&
+	    kvm_vcpu_check_breakpoint(vcpu, &r))
+		return r;
+
+	ctxt->ud = emulation_type & EMULTYPE_TRAP_UD;
+
+	r = x86_decode_insn(ctxt, insn, insn_len);
+
+	trace_kvm_emulate_insn_start(vcpu);
+	++vcpu->stat.insn_emulation;
+
+	return r;
+}
+EXPORT_SYMBOL_GPL(x86_decode_emulated_instruction);
+
 int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 			    int emulation_type, void *insn, int insn_len)
 {
@@ -7357,32 +7393,12 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 	 */
 	write_fault_to_spt = vcpu->arch.write_fault_to_shadow_pgtable;
 	vcpu->arch.write_fault_to_shadow_pgtable = false;
-	kvm_clear_exception_queue(vcpu);
 
 	if (!(emulation_type & EMULTYPE_NO_DECODE)) {
-		init_emulate_ctxt(vcpu);
-
-		/*
-		 * We will reenter on the same instruction since
-		 * we do not set complete_userspace_io.  This does not
-		 * handle watchpoints yet, those would be handled in
-		 * the emulate_ops.
-		 */
-		if (!(emulation_type & EMULTYPE_SKIP) &&
-		    kvm_vcpu_check_breakpoint(vcpu, &r))
-			return r;
-
-		ctxt->interruptibility = 0;
-		ctxt->have_exception = false;
-		ctxt->exception.vector = -1;
-		ctxt->perm_ok = false;
-
-		ctxt->ud = emulation_type & EMULTYPE_TRAP_UD;
-
-		r = x86_decode_insn(ctxt, insn, insn_len);
+		kvm_clear_exception_queue(vcpu);
 
-		trace_kvm_emulate_insn_start(vcpu);
-		++vcpu->stat.insn_emulation;
+		r = x86_decode_emulated_instruction(vcpu, emulation_type,
+						    insn, insn_len);
 		if (r != EMULATION_OK)  {
 			if ((emulation_type & EMULTYPE_TRAP_UD) ||
 			    (emulation_type & EMULTYPE_TRAP_UD_FORCED)) {

arch/x86/kvm/x86.h

@@ -272,6 +272,8 @@ bool kvm_mtrr_check_gfn_range_consistency(struct kvm_vcpu *vcpu, gfn_t gfn,
 					  int page_num);
 bool kvm_vector_hashing_enabled(void);
 void kvm_fixup_and_inject_pf_error(struct kvm_vcpu *vcpu, gva_t gva, u16 error_code);
+int x86_decode_emulated_instruction(struct kvm_vcpu *vcpu, int emulation_type,
+				    void *insn, int insn_len);
 int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 			    int emulation_type, void *insn, int insn_len);
 fastpath_t handle_fastpath_set_msr_irqoff(struct kvm_vcpu *vcpu);

drivers/bus/ti-sysc.c

@@ -3061,8 +3061,10 @@ static int sysc_probe(struct platform_device *pdev)
 		return error;
 
 	error = sysc_check_active_timer(ddata);
-	if (error == -EBUSY)
+	if (error == -ENXIO)
 		ddata->reserved = true;
+	else if (error)
+		return error;
 
 	error = sysc_get_clocks(ddata);
 	if (error)

drivers/clk/imx/clk-imx6q.c

@@ -974,6 +974,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 			       hws[IMX6QDL_CLK_PLL3_USB_OTG]->clk);
 	}
 
-	imx_register_uart_clocks(1);
+	imx_register_uart_clocks(2);
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);

drivers/clk/qcom/gdsc.c

@@ -357,34 +357,52 @@ static int gdsc_init(struct gdsc *sc)
 	if (on < 0)
 		return on;
 
-	/*
-	 * Votable GDSCs can be ON due to Vote from other masters.
-	 * If a Votable GDSC is ON, make sure we have a Vote.
-	 */
-	if ((sc->flags & VOTABLE) && on)
-		gdsc_enable(&sc->pd);
+	if (on) {
+		/* The regulator must be on, sync the kernel state */
+		if (sc->rsupply) {
+			ret = regulator_enable(sc->rsupply);
+			if (ret < 0)
+				return ret;
+		}
 
-	/*
-	 * Make sure the retain bit is set if the GDSC is already on, otherwise
-	 * we end up turning off the GDSC and destroying all the register
-	 * contents that we thought we were saving.
-	 */
-	if ((sc->flags & RETAIN_FF_ENABLE) && on)
-		gdsc_retain_ff_on(sc);
+		/*
+		 * Votable GDSCs can be ON due to Vote from other masters.
+		 * If a Votable GDSC is ON, make sure we have a Vote.
+		 */
+		if (sc->flags & VOTABLE) {
+			ret = regmap_update_bits(sc->regmap, sc->gdscr,
+						 SW_COLLAPSE_MASK, val);
+			if (ret)
+				return ret;
+		}
+
+		/* Turn on HW trigger mode if supported */
+		if (sc->flags & HW_CTRL) {
+			ret = gdsc_hwctrl(sc, true);
+			if (ret < 0)
+				return ret;
+		}
 
-	/* If ALWAYS_ON GDSCs are not ON, turn them ON */
-	if (sc->flags & ALWAYS_ON) {
-		if (!on)
-			gdsc_enable(&sc->pd);
+		/*
+		 * Make sure the retain bit is set if the GDSC is already on,
+		 * otherwise we end up turning off the GDSC and destroying all
+		 * the register contents that we thought we were saving.
+		 */
+		if (sc->flags & RETAIN_FF_ENABLE)
+			gdsc_retain_ff_on(sc);
+	} else if (sc->flags & ALWAYS_ON) {
+		/* If ALWAYS_ON GDSCs are not ON, turn them ON */
+		gdsc_enable(&sc->pd);
 		on = true;
-		sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
 	}
 
 	if (on || (sc->pwrsts & PWRSTS_RET))
 		gdsc_force_mem_on(sc);
 	else
 		gdsc_clear_mem_on(sc);
 
+	if (sc->flags & ALWAYS_ON)
+		sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
 	if (!sc->pd.power_off)
 		sc->pd.power_off = gdsc_disable;
 	if (!sc->pd.power_on)

drivers/cpufreq/armada-37xx-cpufreq.c

@@ -102,7 +102,11 @@ struct armada_37xx_dvfs {
 };
 
 static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
-	{.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
+	/*
+	 * The cpufreq scaling for 1.2 GHz variant of the SOC is currently
+	 * unstable because we do not know how to configure it properly.
+	 */
+	/* {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, */
 	{.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
 	{.cpu_freq_max = 800*1000*1000,  .divider = {1, 2, 3, 4} },
 	{.cpu_freq_max = 600*1000*1000,  .divider = {2, 4, 5, 6} },

drivers/dma/of-dma.c

@@ -67,8 +67,12 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
 		return NULL;
 
 	ofdma_target = of_dma_find_controller(&dma_spec_target);
-	if (!ofdma_target)
-		return NULL;
+	if (!ofdma_target) {
+		ofdma->dma_router->route_free(ofdma->dma_router->dev,
+					      route_data);
+		chan = ERR_PTR(-EPROBE_DEFER);
+		goto err;
+	}
 
 	chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target);
 	if (IS_ERR_OR_NULL(chan)) {
@@ -79,6 +83,7 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
 		chan->route_data = route_data;
 	}
 
+err:
 	/*
 	 * Need to put the node back since the ofdma->of_dma_route_allocate
 	 * has taken it for generating the new, translated dma_spec

drivers/dma/sh/usb-dmac.c

@@ -855,8 +855,8 @@ static int usb_dmac_probe(struct platform_device *pdev)
 
 error:
 	of_dma_controller_free(pdev->dev.of_node);
-	pm_runtime_put(&pdev->dev);
 error_pm:
+	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return ret;
 }

drivers/dma/xilinx/xilinx_dma.c

@@ -394,6 +394,7 @@ struct xilinx_dma_tx_descriptor {
  * @genlock: Support genlock mode
  * @err: Channel has errors
  * @idle: Check for channel idle
+ * @terminating: Check for channel being synchronized by user
  * @tasklet: Cleanup work after irq
  * @config: Device configuration info
  * @flush_on_fsync: Flush on Frame sync
@@ -431,6 +432,7 @@ struct xilinx_dma_chan {
 	bool genlock;
 	bool err;
 	bool idle;
+	bool terminating;
 	struct tasklet_struct tasklet;
 	struct xilinx_vdma_config config;
 	bool flush_on_fsync;
@@ -1049,6 +1051,13 @@ static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
 		/* Run any dependencies, then free the descriptor */
 		dma_run_dependencies(&desc->async_tx);
 		xilinx_dma_free_tx_descriptor(chan, desc);
+
+		/*
+		 * While we ran a callback the user called a terminate function,
+		 * which takes care of cleaning up any remaining descriptors
+		 */
+		if (chan->terminating)
+			break;
 	}
 
 	spin_unlock_irqrestore(&chan->lock, flags);
@@ -1965,6 +1974,8 @@ static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	if (desc->cyclic)
 		chan->cyclic = true;
 
+	chan->terminating = false;
+
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	return cookie;
@@ -2436,6 +2447,7 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
 
 	xilinx_dma_chan_reset(chan);
 	/* Remove and free all of the descriptors in the lists */
+	chan->terminating = true;
 	xilinx_dma_free_descriptors(chan);
 	chan->idle = true;