PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card

[ Upstream commit c926069 ]

Commit ac91e69 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1).  The 1 sec delay is only required
for Conventional PCI.

But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:

Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.

The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci.  PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:

  To allow components to perform internal initialization, system software
  must wait for at least 100 ms from the end of a reset (cold/warm/hot)
  before it is permitted to issue Configuration Requests

The behavior of the Torrent QN16e card thus appears to be a quirk.  Treat
it as such and lengthen the reset delay for this specific device.

Fixes: ac91e69 ("PCI: Unify delay handling for reset and resume")
Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de
Reported-by: Chad Schroeder <CSchroeder@sonifi.com>
Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/
Tested-by: Chad Schroeder <CSchroeder@sonifi.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/pci/quirks.c

@@ -6161,3 +6161,15 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2d, dpc_log_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2f, dpc_log_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size);
 #endif
+
+/*
+ * Devices known to require a longer delay before first config space access
+ * after reset recovery or resume from D3cold:
+ *
+ * VideoPropulsion (aka Genroco) Torrent QN16e MPEG QAM Modulator
+ */
+static void pci_fixup_d3cold_delay_1sec(struct pci_dev *pdev)
+{
+	pdev->d3cold_delay = 1000;
+}
+DECLARE_PCI_FIXUP_FINAL(0x5555, 0x0004, pci_fixup_d3cold_delay_1sec);