[Beta 1.1] USB disks not showing up in Video or Music

[Iri-Dium]

Beta 1,1 Fresh install from xbian installer.

Mounting a USB drive, the device shows up in ssh df -h and in system->Info, however it is not shown in Videos, Music Pictures etc. It can be added via Add->Source but should be automounted.

The drive is mounted as /dev/sda1 466G 400G 67G 86% /media/Movies2-9A808EA0808E828D

I though this was fixed in earlier releases of Beta.

[mk01]

iri, this one is special case of 'not showing' and in general this problem was solved as we were investigating, or it's not working in general again ?

[mk01]

can you post lsusb -v of this drive?

(do a lsusb, theca the vendor:id and then "lsusb -v -d xxx:xxx")

[Iri-Dium]

Yes I thought this was fixed some time ago - but it is back in stock Beta 1.1 and Beta 1 (I believe). It has been confirmed from other users as well in (Beta 1.1 official thread).

The same setup works perfectly in Beta 2.

Bus 001 Device 009: ID 07ff:00ff Unknown Portable Hard Drive
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07ff Unknown
idProduct 0x00ff Portable Hard Drive
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0

[Iri-Dium]

It's related to #432

Starting DBUS in xbian-config and restarting XBMC the disks are viewable.

[mcwimh]

Sorry newbie here, but I noticed it happened when I changed dhcp to static, when I changed it back all my files en folders appeared again.