You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Note! This is a follow up to #4 as a separate issue so the other can be closed separately when resolved.
Does the LFXO Capacitor Bank (CMU clock) also have to be calibrated/tuned and the current tune/tuning value set for that as well in the firmware for ITead Zigbee 3.0 USB Dongle Model 9888010100045 with hardware version 1.3 or?
Note! This is a follow up to #4 as a separate issue so the other can be closed separately when resolved.
Does the LFXO Capacitor Bank (CMU clock) also have to be calibrated/tuned and the current tune/tuning value set for that as well in the firmware for ITead Zigbee 3.0 USB Dongle Model 9888010100045 with hardware version 1.3 or?
https://www.silabs.com/community/mcu/32-bit/forum.topic.html/clibrate_lfxo_inefr-3I0T
https://www.silabs.com/community/mcu/32-bit/forum.topic.html/how_do_i_use_thetun-Pqlx
https://www.silabs.com/community/mcu/32-bit/forum.topic.html/how_to_improve_lfxoaccuracyinbgm13p22-v4qc
They reference to:
https://www.silabs.com/documents/public/application-notes/an0004.2-efr32-series2-cmu.pdf
and
https://www.silabs.com/documents/public/application-notes/an0004.1-efm32-cmu.pdf
All these manufacturing tests have not yet been done or?
https://www.silabs.com/documents/public/application-notes/an700-1-mfg-test-guidelines-efr32.pdf
PS: Read about LFXO in KB article below "This KBA focuses only to HFXO calibration but the LFXO has its own capacitor bank."
https://www.silabs.com/community/wireless/proprietary/knowledge-base.entry.html/2019/03/18/hfxo_capacitor_bank-7uRt
The text was updated successfully, but these errors were encountered: