Skip to content

yockgen/dpdk-demo01

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

48 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

HARDWARE/VM PLATFORM

VM:VirtualBox OS: UBUNTU 20.04
NIC: 4 (1 Primary Bridge Mode, 3 INTERNAL - for dpdk prototype)
Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) - all 4

INSTALL DPDK

https://core.dpdk.org/doc/quick-start/

SETUP ENVIRONMENT

sudoer yourself

sudo -i

Huge Page

mkdir -p /dev/hugepages
mountpoint -q /dev/hugepages || mount -t hugetlbfs nodev /dev/hugepages
echo 256 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages

Bring Down NIC for DPDK prototype

/home/yockgenm/dpdk# ifconfig enp0s8 down
/home/yockgenm/dpdk# ifconfig enp0s9 down

Enable unsafe iommu mode (need study why such)

echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode

Bind Down NICs to DPDK compatible driver

/home/yockgenm/dpdk# python3 /home/yockgen/dpdk/usertools/dpdk-devbind.py -b vfio-pci 0000:00:08.0
/home/yockgenm/dpdk# python3 /home/yockgen/dpdk/usertools/dpdk-devbind.py -b vfio-pci 0000:00:09.0

To confirm: /home/yockgenm/dpdk# python3 /home/yockgen/dpdk/usertools/dpdk-devbind.py -s

PTP CLOCK SYNC IN BOTH TALKER AND LISTENER MACHINES

Run following in TALKER machine and follow by LISTENER machine:
sudo /ptp/time_sync.sh i225

Validate following in listener machine

tail /var/log/ptp4l.log
test: ptp4l.log => rms value must below than 100us

tail /var/log/phc2sys.log
test: phc2sys => offset value must be below than 100us

Note: not all NIC with PTP feature, please check your NIC specification, you could ignore this section if not eligible.

To verify if the NIC supports PTP feature: sudo ethtool -T enp0s8 Check on following: PTP Hardware Clock: 0

RUN LISTENER

An executable program listen to all L2 (MAC/Ethernet level) broadcasting data frame

compile:
make static

run:
sudo /home/yockgen/dpdk/examples/listener/build/listener -l 2-3 -n 1 -a 0000:00:08.0 -d librte_net_virtio.so -d librte_mempool_ring.so -- -p 0x1 -T 1

If you want to run using bifurcated level PMD like AF_PACKET, AF_XDP (mean still through Linux kernel and share NIC with other non-DPDK app), please do not bring down the interface (ifconfig xxx down) and ignore the dpdk-devbind.py steps, run following:

sudo /home/yockgen/dpdk-demo01/listener/build/listener -l 2-3 -n 1 --vdev=net_af_xdp0,iface=enp0s8 -d librte_net_virtio.so -d librte_mempool_ring.so -- -p 0x1 -T 1

Route Packet to queue 3 in listener

If you're using PTP to sync clock between talker and listener mentioned in above section, please route the listener packet RX (receiving/ingress) to queue=1 as below:

ethtool -K enp169s0 ntuple on ethtool -N enp169s0 flow-type ether vlan 24576 vlan-mask 0x1FFF action 3

//validate result
ethtool --show-ntuple enp169s0

//running listner on rx queue=3
sudo /home/yockgen/dpdk-demo01/listener/build/listener -l 2-3 -n 1 --vdev=net_af_xdp0,iface=enp0s8,start_queue=3 -- -p 0x1 -T 1 -D 1

RUN Talker

An executable program sending L2 (MAC/Ethernet level) data frame

compile:
make static

run:
sudo /home/yockgen/dpdk/examples/talker/build/talker -l 1 -n 1 -a 0000:00:09.0 -d librte_net_virtio.so -d librte_mempool_ring.so -- -p 0x1 -T 1 -d 08:00:27:cf:69:3e -D 1

If you want to run using bifurcated level PMD like AF_PACKET, AF_XDP (mean still through Linux kernel and share NIC with other non-DPDK app), please do not bring down the interface (ifconfig xxx down) and ignore the dpdk-devbind.py steps, run following:

sudo /home/yockgen/dpdk-demo01/l2fwd/build/talker -l 1 -n 1 --vdev=net_af_xdp1,iface=enp0s9 -- -p 0x1 -T 1 -d 08:00:27:cf:69:3e

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

 
 
 

Languages