Skip to content

youbot/youbot_driver

Repository files navigation

youBot API

API documentation

The basic idea of the youBot API is to represent a robot system as a combination of decoupled functional sub-systems. That is, this API represents manipulator arm and base platform as the combination of several joints. At the same time each joint is defined as a combination of a motor and a gearbox.

There are three main classes in the youBot API that a user should be aware of.

  • YouBotManipulator class that represents youBot arm as the aggregation of several joints and a gripper
  • YouBotBase class that represents youBot base platform
  • YouBotJoint class that represents joints which make up both the manipulator and the base

Installation

System requirements:

  • Linux
  • Ethernet adapter
  • Root access to the Ethernet adapter

These libraries are required by the youBot API:

Installation with rosmake:

Install a minimal installation of ROS. (see ros.org)

Clone the youBot API sources:

git clone git://github.com/youbot/youbot_driver.git

Add the repository folder to the ROS_PACKAGE_PATH environment variable.

Compile the youbot driver by typing:

rosmake youbot_driver --rosdep-install

Manual installation:

First, make sure that you have the gnu-make software available on your system (version 3.81 or later required), as well as a working C compiler chain. The console commands below are exemplary for a Ubuntu Linux. You will need a git version control software:

sudo apt-get install git git-core

Cmake a cross platform make is also necessary:

sudo apt-get install cmake

To download the youBot API sources type:

git clone git://github.com/youbot/youbot_driver.git

Install boost.

sudo apt-get install libboost-all-dev

Now you should be able to compile the youBot API.

cd <your_folder>/youbot_driver
mkdir build
cd build
cmake ..
make

The library will be generated in the folder ~/youbot_driver/lib.

Usage

The youBot API give you complete joint level access to the youBot joints. Every youBot joint is represented as a youbot::YouBotJoint class in the API. At this stage we make no difference if it is a base joint which powers a wheel or a manipulator joint.

By the classes youbot::YouBotBase and youbot::YouBotManipulator it is possible to get access to a youbot::YouBotJoint instance for a particular joint.

To set a setpoint or read some sensor values form the joints you have to use the youbot::JointData classes. Which could be for instance youbot::JointVelocitySetpoint or youbot::JointSensedCurrent.

To configure parameters of a joint, you have to use the youbot::JointParameter classes. Which could be for instance youbot::MaximumPositioningVelocity.

Example Programs

You can find example programs in the youbot_applications repository.

Documentation

For more detailed information on class and methods please refer to the API documentation.

To generate the documentation from the source code type:

sudo apt-get install doxygen
cd build
make doc 

Run without sudo

The youBot Driver needs access to the raw ethernet device. Under Linux a normal user does not have access to the raw ethernet device. You can grand this capability to a program by the tool setcap. To install setcap use:

sudo apt-get install libcap2-bin

To provide a program with raw access to a ethernet device use: (replace the ./YouBot_KeyboardRemoteControl with your program.)

sudo setcap cap_net_raw+ep ./YouBot_KeyboardRemoteControl

This have to be done whenever the executable is created or replaces e.g. after building.

License

This software is published under a dual-license: GNU Lesser General Public License LGPL 2.1 and BSD license. The dual-license implies that users of this code may choose which terms they prefer.