Skip to content

Ultra thin 3D printed cases for Keebio Iris Rev.4 PCB, with magnets snapping feature

Notifications You must be signed in to change notification settings

yz-54/3D-printed-case-for-Keebio-Iris-Rev4

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

30 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

3D-printed-case-for-Keebio-Iris-Rev4

Ultra thin 3D printed cases for Keebio Iris Rev.4 PCB, with magnets snapping feature

Summary:

3D printed case for Keebio Iris Rev.4 PCB
Assumable these using 14mm M3 bolts and nuts (bolts longer than 14mm will stick out and two pieces won't snap together)
Ultra-thin profile, the middle layer is 6.8mm thick and two-piece can be snapped together and held by magnets for easy carry
Added external buttons for easy firmware flashing
I printed the middle layer using translucent filament to get better lighting
Fusion360 file is included for anyone wants to modify themselves

Front

back

folded

Tolerance This has been fixed in version 2 by adding extra 1mm rim

gif
Use magnets to snap two pieces togather, note rubber feet are complementary

You will need:

3D printed parts
14mm M3 bolts and nuts (Has to be 14mm. Or you have to use spacers if longer than 14. Shorter won't work)
12mm by 2mm magnets
10mm by 3mm rubber feet (3/8" by 1/8")
super glue
(optional some needle file)

Printer settings:

layer height 0.15mm
Use supports

Additionals:

Assembly video

video demo 2

Link to thingiverse



Version 2 - tent support, added rim

In this version, ErgoDox EZ tilt/ tent kit is supported for the middle layer
layer height is 11mm and button has been modded. Use M3 nuts to put them togather
ver2

Also added 1mm rims to top and bottom plates and middle layer, so there's extra space for slicing

About

Ultra thin 3D printed cases for Keebio Iris Rev.4 PCB, with magnets snapping feature

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published