[taerobee-parachute.cfg] #96
Assignees
Labels
issue: config
issue type
Comments
zer0Kerbal
added a commit
that referenced
this issue
Jan 31, 2022
# [taerobee-parachute.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* Updated [attachRules] from 1,0,1,0,0 to 1,0,0,1,0
* Added [buoyancyUseCubeNamed] = PACKED
* Added FX
* [fx_gasBurst_white] = 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, decouple
* [sound_decoupler_fire] = decouple
* Updated [maxTemp] from 2000 to 2250 re: prototype
* Added [emissiveConstant] = 0.7
* Changed [crashTolerence] from 12 to 8
* Added [preferredStage] = PARACHUTESTAGE
* [ModuleParachute]
* [clampMinAirPressure] = 0.04
* [deploymentSpeed] set to 0.12 was 1
* [semiDeploymentSpeed] set to 0.5 was 1
* [chuteMaxTemp] = 650
* [ModuleDragModifier]
* [dragModifier] set to 1.25 was 1
* [ModuleDecouple]
* [ejectionForcePercent] = 100
* [fxGroupName] = decouple
* [menuName] = #TBEE-decoup-menu
* [stagingEnableText] = #TBEE-decoup-enable
* [stagingDisableText] = #TBEE-decoup-disable
* Added [ModuleTestSubject], copied from MK1
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cone
* radius = 0.3125 m
* height = 0.3 m
* volume = 0.03068 m³
* m³ x 1000L = 30.68 m³
* packedVolume = 35
* stackableQuantity = 12
* closes #96 - [taerobee-parachute.cfg]
This was referenced Jan 31, 2022
Merged
zer0Kerbal
added a commit
that referenced
this issue
Jan 31, 2022
# Update Taerobee | ***Taerobee*** | | ***diameter (m)*** | ***height (m)*** | ***width (m)*** | ***math*** | ***radius (m)*** | ***m²*** | ***Liters*** | | :----------------------- | :--------: | -----------------: | ---------------: | --------------: | :----------------: | ---------------: | -------: | -----------: | | taerobee-adapter-short | trunc.cone | 0.625 | 0.1 | 0.15625 | (1/3)πh (r²+rR+R²) | 0.3125 | 0.01790 | 17.9 | | taerobee-adapter-tall | trunc.cone | 0.625 | 0.3 | 0.15625 | (1/3)πh (r²+rR+R²) | 0.3125 | 0.05369 | 53.69 | | taerobee-aerobee | cylinder | 0.625 | 0.43 | | πr²h | 0.3125 | 0.13192 | 131.93 | | taerobee-control | cylinder | 0.625 | 0.1 | | πr²h | 0.3125 | 0.03068 | 30.68 | | taerobee-decoupler | cylinder | 0.625 | 0.19 | | πr²h | 0.3125 | 0.05829 | 58.3 | | taerobee-despin | cylinder | 0.625 | 0.1 | | πr²h | 0.3125 | 0.03068 | 30.68 | | taerobee-fin-large | rectangle | 0.36 | 0.72 | 0.02 | L*H*W | 0.1800 | 0.00518 | 5.19 | | taerobee-fin-small | rectangle | 0.37 | 0.16 | 0.04 | L*H*W | 0.1850 | 0.00237 | 2.37 | | taerobee-nosecone | cone | 0.625 | 0.98 | | (πr²h)/3 | 0.3125 | 0.10022 | 100.23 | | taerobee-parachute | cone | 0.625 | 0.3 | | (πr²h)/3 | 0.3125 | 0.03068 | 30.68 | | taerobee-science | cylinder | 0.625 | 0.3 | | πr²h | 0.3125 | 0.09204 | 92.04 | | taerobee-sustainertank-3 | cylinder | 0.625 | 2.88 | | πr²h | 0.3125 | 0.88357 | 883.58 | | taerobee-tinytim | cylinder | 0.625 | 1.14 | | πr²h | 0.3125 | 0.34975 | 349.75 | * closes #78 - Update Taerobee * [taerobee-adapter-short.cfg] * Create part based on Squad's adapterSmallMiniShort * [rescaleFactor] = 0.5 * [bulkheadProfiles] = size00,size0 * keep variants * add @thumb * Update Localization - <en-us.cfg> * Add * DRAG_CUBE] * [ModuleCargoPart] * type = trunc.cone * radius = 0.3125 m * Radius = 0.15625 m * height = 0.1 m * volume = 0.0179 m³ * m³ x 1000L = 17.9 m³ * packedVolume = 18 * stackableQuantity = 20 * closes #87 - [taerobee-adapter-short.cfg] * [taerobee-adapter-tall.cfg] * Create part based on Squad's adapterSmallMiniTall * [rescaleFactor] = 0.5 * [bulkheadProfiles] = size00,size0 * keep variants * add @thumb * Update Localization - <en-us.cfg> * Add * DRAG_CUBE] * [ModuleCargoPart] * type = trunc.cone * radius = 0.3125 m * Radius = 0.15625 m * height = 0.3 m * volume = 0.05369 m³ * m³ x 1000L = 53.69 m³ * packedVolume = 55 * stackableQuantity = 8 * closes #88 - [taerobee-adapter-tall.cfg] * [taerobee-aerobee.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed * Added [EngineType] = LiquidFuel to [ModuleEngines]] * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.43 m * volume = 0.13192 m³ * m³ x 1000L = 131.93 m³ * packedVolume = 150 * stackableQuantity = 5 * closes #89 - [taerobee-aerobee.cfg] * [taerobee-control.cfg] * Rename part cfg to use hyphen * Change [bulkheadProfiles] from size0 to size00 * Change [ModuleCommand] EC consumption from 0.001 to 0.006 re: early tech worse than 0.005 (21.5/h) * Add [ModuleSAS] - no level * Add [ModuleReactionWheel] * PitchTorque = 0.5 * YawTorque = 0.5 * RollTorque = 0.5 * torqueResponseSpeed = 11 * consumes [ElectricCharge] at a rate of 0.01 re: early tech - worse than 0.0003 * Updates[ModuleDataTransmitter] * [packetInterval] set to 1.0, was 0.6 * [packetSize] set to 2, was 1 * [antennaPower] set to 5000, was 50000 * Resource [ElectricCharge] upped to 75, was 5 re: same size as Z-100 but earlier tech and other things in part * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.1 m * volume = 0.03068 m³ * m³ x 1000L = 30.68 m³ * packedVolume = 32 * stackableQuantity = 12 * closes #90 - [taerobee-control.cfg] * [taerobee-decoupler.cfg] * rename part cfg to use hyphen * Change [bulkheadProfiles] from size0,srf to size00,srf * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.19 m * volume = 0.05829 m³ * m³ x 1000L = 58.3 m³ * packedVolume = 60 * stackableQuantity = 8 * closes #91 - [taerobee-decoupler.cfg] * [taerobee-despin.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Resource [MonoPropellant] amount changed to 3.0 from 1.5 * [ModuleSAS] consumption rate updated from 0.05 to 0.25 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.1 m * volume = 0.03068 m³ * m³ x 1000L = 30.68 m³ * packedVolume = 35 * stackableQuantity = 10 * closes #92 - [taerobee-despin.cfg] * [taerobee-fin-large.cfg] * rename part cfg to use hyphen * Add * DRAG_CUBE] * [ModuleCargoPart] * type = rectangle * x = 0.36m * y = 0.72m * z = 0.02m * volume = 0.00518 m³ * m³ x 1000L = 5.19 m³ * packedVolume = 6 * stackableQuantity = 12 * closes #93 - [taerobee-fin-large.cfg] * [taerobee-fin-small.cfg] * rename part cfg to use hyphen * Add * DRAG_CUBE] * [ModuleCargoPart] * type = rectangle * x = 0.37m * y = 0.72m * z = 0.04m * volume = 0.00237 m³ * m³ x 1000L = 2.37 m³ * packedVolume = 3 * stackableQuantity = 20 * closes #94 - [taerobee-fin-small.cfg] * [taerobee-nosecone.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cone * radius = 0.3125 m * height = 0.98 m * volume = .010022 m³ * m³ x 1000L = 100.25 m³ * packedVolume = 125 * stackableQuantity = 4 * closes #95 - [taerobee-nosecone.cfg] * [taerobee-parachute.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Updated [attachRules] from 1,0,1,0,0 to 1,0,0,1,0 * Added [buoyancyUseCubeNamed] = PACKED * Added FX * [fx_gasBurst_white] = 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, decouple * [sound_decoupler_fire] = decouple * Updated [maxTemp] from 2000 to 2250 re: prototype * Added [emissiveConstant] = 0.7 * Changed [crashTolerence] from 12 to 8 * Added [preferredStage] = PARACHUTESTAGE * [ModuleParachute] * [clampMinAirPressure] = 0.04 * [deploymentSpeed] set to 0.12 was 1 * [semiDeploymentSpeed] set to 0.5 was 1 * [chuteMaxTemp] = 650 * [ModuleDragModifier] * [dragModifier] set to 1.25 was 1 * [ModuleDecouple] * [ejectionForcePercent] = 100 * [fxGroupName] = decouple * [menuName] = #TBEE-decoup-menu * [stagingEnableText] = #TBEE-decoup-enable * [stagingDisableText] = #TBEE-decoup-disable * Added [ModuleTestSubject], copied from MK1 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cone * radius = 0.3125 m * height = 0.3 m * volume = 0.03068 m³ * m³ x 1000L = 30.68 m³ * packedVolume = 35 * stackableQuantity = 12 * closes #96 - [taerobee-parachute.cfg] * [taerobee-science.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.3 m * volume = 0.09204 m³ * m³ x 1000L = 92.04 m³ * packedVolume = 100 * stackableQuantity = 4 * closes #97 - [taerobee-science.cfg] * [taerobee-sustainertank-3.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 2.88 m * volume = 0.88357 m³ * m³ x 1000L = 883.58 m³ * packedVolume = 900 * stackableQuantity = 1 * closes #98 - [taerobee-sustainertank-3.cfg] * [taerobee-tinytim.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed * Added [EngineType] = SolidBooster to [ModuleEngines] * ADD FX * [fx_exhaustSparks_yellow] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running * [fx_smokeTrail_medium] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running * [sound_explosion_low] = flameout * Adjust [entryCost] = 50 from 0 * Change [category] = Engine from Propulsion * Add [heatConductivity] = 0.06 note: 1/2 default * [skinInternalConductionMult] = 4.0 * [emissiveConstant] = 0.5 note: yes, it's white. But let's claim it's an emissive white... * Change * [maximum_drag] from 0.3 to 0.2 * [crashTolerance] from 8 to 7 * [maxTemp] from 3400 to 2000 * Add [ModuleJettison] * Adjust [SolidFuel] resource * [amount] to 35 initially 10 * [maAmount] to 35 initially 10 * math: * volume of Part in L = 349.75 * divide by 50 for units (ratio taken from stock solidBooster RT-10) * multiple by 5 units per unit for SolidFuel * = 34.95 units of [SolidFuel] * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 1.14 m * volume = 0.34975 m³ * m³ x 1000L = 349.78L * packedVolume = 400 * stackableQuantity = 1 * closes #99 - [taerobee-tinytim.cfg]
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
No description provided.
The text was updated successfully, but these errors were encountered: