[Device Support Request] Zigbee 3-button switch "model": "TS0043", "manufacturer": "_TZ3000_famkxci2"

[joe-sydney]

Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]

TS0043 zigbee 3-button switch seems to be supported in general, but my variant (_TZ3000_famkxci2) doesn't seem to be. I was able to add the device to ZHA, but no zha_event is fired when pressing the buttons. Moreover, 3 switch entities are created.

Describe the solution you'd like
A clear and concise description of what you want to happen.

Enable support for this particular variant.
Update: I figured out something based on one of the quirks of the 4 button version. The yaml that I have used successfully is copied into my follow up reply - would be good if this could be added into the release. Sorry, I suppose I could have put in a pull request, but the overheads of setting up to do so is a bit much for this.

Device signature

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0000",
      "in_clusters": [
        "0x0000",
        "0x0001",
        "0x0006"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    },
    "2": {
      "profile_id": 260,
      "device_type": "0x0000",
      "in_clusters": [
        "0x0001",
        "0x0006",
        "0xe000"
      ],
      "out_clusters": []
    },
    "3": {
      "profile_id": 260,
      "device_type": "0x0000",
      "in_clusters": [
        "0x0001",
        "0x0006",
        "0xe000"
      ],
      "out_clusters": []
    }
  },
  "manufacturer": "_TZ3000_famkxci2",
  "model": "TS0043",
  "class": "zigpy.device.Device"
}

Diagnostic information

Additional logs

Paste any additional debug logs here.
Don't remove the extra line breaks outside the ``` marks.

Additional context
Add any other context or screenshots about the feature request here.

[joe-sydney]

Based on one of the quirks of the 4 button version, the following works for me.

First import TuyaZBE000Cluster by changing

• zhaquirks.tuya import TuyaSmartRemoteOnOffCluster
  to
• zhaquirks.tuya import TuyaSmartRemoteOnOffCluster, TuyaZBE000Cluster

Then add the following quirk:

class TuyaSmartRemote0043TOPlusB(CustomDevice):
    """Tuya 3-button remote device with time on out cluster."""

    signature = {
        # SizePrefixedSimpleDescriptor(endpoint=1, profile=260, device_type=0, device_version=1, input_clusters=[0, 1, 6,], output_clusters=[10, 25]))
        # SizePrefixedSimpleDescriptor(endpoint=2, profile=260, device_type=0, device_version=1, input_clusters=[1, 6, 57344], output_clusters=[])
        # SizePrefixedSimpleDescriptor(endpoint=3, profile=260, device_type=0, device_version=1, input_clusters=[1, 6, 57344], output_clusters=[])
        MODEL: "TS0043",
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    PowerConfiguration.cluster_id,
                    OnOff.cluster_id,
                ],
                OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
            },
            2: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    PowerConfiguration.cluster_id,
                    OnOff.cluster_id,
                    TuyaZBE000Cluster.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            3: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    PowerConfiguration.cluster_id,
                    OnOff.cluster_id,
                    TuyaZBE000Cluster.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
        },
    }
    replacement = {
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    PowerConfiguration.cluster_id,
                ],
                OUTPUT_CLUSTERS: [
                    Time.cluster_id,
                    Ota.cluster_id,
                    TuyaSmartRemoteOnOffCluster,
                ],
            },
            2: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [TuyaSmartRemoteOnOffCluster, TuyaZBE000Cluster],
            },
            3: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [TuyaSmartRemoteOnOffCluster, TuyaZBE000Cluster],
            },
        },
    }

    device_automation_triggers = {
        (SHORT_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: SHORT_PRESS},
        (LONG_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: LONG_PRESS},
        (DOUBLE_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: DOUBLE_PRESS},
        (SHORT_PRESS, BUTTON_2): {ENDPOINT_ID: 2, COMMAND: SHORT_PRESS},
        (LONG_PRESS, BUTTON_2): {ENDPOINT_ID: 2, COMMAND: LONG_PRESS},
        (DOUBLE_PRESS, BUTTON_2): {ENDPOINT_ID: 2, COMMAND: DOUBLE_PRESS},
        (SHORT_PRESS, BUTTON_3): {ENDPOINT_ID: 3, COMMAND: SHORT_PRESS},
        (LONG_PRESS, BUTTON_3): {ENDPOINT_ID: 3, COMMAND: LONG_PRESS},
        (DOUBLE_PRESS, BUTTON_3): {ENDPOINT_ID: 3, COMMAND: DOUBLE_PRESS},
    }

[MattWestb]

Great work done !!

Can you making one PR so it going in the main ZHA to the next release ?

[javicalle]

You can do it yourself by simply editing the file from the web:

• https://github.com/zigpy/zha-device-handlers/blob/dev/zhaquirks/tuya/ts0043.py