Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Getting a seeeduino xiao ble to deep sleep #1901

Closed
rich-westarete opened this issue Aug 14, 2023 · 0 comments
Closed

Getting a seeeduino xiao ble to deep sleep #1901

rich-westarete opened this issue Aug 14, 2023 · 0 comments

Comments

@rich-westarete
Copy link

I built a one-off keyboard for personal use, using the seeeduino xiao ble. Immediately I noticed it was consuming battery much faster than I would have expected.

I turned on USB logging and it reported that it could not go into deep sleep because of the GD25Q16 chip. I added &qspi { status = "disabled";}; to the overlay file. I also added the following lines to the .config file, which I don’t fully understand, but my intention was to allow ZMK to save settings to the internal flash memory.

CONFIG_MPU_ALLOW_FLASH_WRITE=y
CONFIG_NVS=y
CONFIG_SETTINGS_NVS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y

Over the weekend battery usage was close to inline with what I would expect. I'm not sure which of these changes made the difference, but something surely did.
caksoylar added a commit to caksoylar/zmk-config that referenced this issue Sep 3, 2023
@caksoylar
Disable Xiao BLE flash chip zmkfirmware/zmk#1901
9896075
caksoylar added a commit to caksoylar/zmk that referenced this issue Sep 6, 2023
@caksoylar
fix(boards): Disable QSPI for Xiao BLE
f675ce7 
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.

Resolves zmkfirmware#1901
@caksoylar caksoylar mentioned this issue Sep 6, 2023
Merged
caksoylar added a commit to caksoylar/zmk-config that referenced this issue Sep 6, 2023
@caksoylar
Revert "Disable Xiao BLE flash chip zmkfirmware/zmk#1901"
d6c218b 
This reverts commit 9896075.

It is now fixed in ZMK!
osmakari pushed a commit to hidergo/zmk that referenced this issue Sep 14, 2023
@caksoylar @osmakari
fix(boards): Disable QSPI for Xiao BLE
c3c01ce 
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.

Resolves zmkfirmware#1901
mrlinuxfish pushed a commit to mrlinuxfish/zmk that referenced this issue Sep 29, 2023
@caksoylar @mrlinuxfish
fix(boards): Disable QSPI for Xiao BLE
d2c4900 
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.

Resolves zmkfirmware#1901
FearlessSpiff pushed a commit to FearlessSpiff/zmk that referenced this issue Oct 31, 2023
@caksoylar @FearlessSpiff
fix(boards): Disable QSPI for Xiao BLE
47abe73 
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.

Resolves zmkfirmware#1901
FearlessSpiff pushed a commit to FearlessSpiff/zmk that referenced this issue Oct 31, 2023
@caksoylar @FearlessSpiff
fix(boards): Disable QSPI for Xiao BLE
833ae7d 
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.

Resolves zmkfirmware#1901
snoyer pushed a commit to snoyer/zmk that referenced this issue Nov 5, 2023
@caksoylar @snoyer
fix(boards): Disable QSPI for Xiao BLE
1d883f3 
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.

Resolves zmkfirmware#1901
tmbutcher added a commit to tmbutcher/zmk that referenced this issue Dec 17, 2023
@tmbutcher
Branch Creation
1045745 
commit 1b8b6b4a0ee86b5b18737da4d03ab36df13812f4
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Dec 16 10:24:15 2023 -0800

    refactor(core): Make low priority queue optional.

    * Add a new Kconfig symbol to enable the low priority queue, and make
      the two features that depend on it `select` the symbol to turn it on.
      This helps ensure no wasted RAM/ROM on devices that don't need it.

commit f4f402fa44793ef7ce2a6ac382aeded57a5f16aa
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri Dec 15 20:13:43 2023 +0000

    fix(ci): Use unique artifact for test logs

    * To address conflicts with identically named artifact uploads, include the
      test name in the artifact name.

commit 9b3a98691c178067e87f888d986e1ec87dda66e6
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Dec 13 10:59:24 2023 -0800

    refactor(bt): Split security and conn exp. Kconfig

    * Split connection and security experimental changes into dedicated
      Kconfig flags for easier testing of only connection related fixes.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 52ed49b4bb2ed14ea1a5bc8305cf6f6cabb79673
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Dec 13 19:13:21 2023 +0000

    fix(ci): Upgrade to github-script@v7

    * Also adjust form @actions/upload API changes.

commit ff57ccc75adcce2b64d37dc923e424d026c5f12f
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 10 22:51:37 2023 -0800

    feat(shields): Allow settings_reset to build with board-only keyboards

commit 2c50cff891becd70e04152202ee76a1be95089fa
Author: Hooky <117450225+HookyKB@users.noreply.github.com>
Date:   Sun Dec 10 06:10:05 2023 +0800

    feat(kscan): Add charlieplex keyscan driver

    * Supports matrixes with and without additional interrupt pin use.

    Co-authored-by: Peter Johanson <peter@peterjohanson.com>

commit b35a5e83c05a3ed9db8d13e5571ee20f588fa3ad
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri Dec 8 14:11:36 2023 -0800

    fix(shields): Don't enable passkey support on Uno.

    * The ZMK Uno has no way to input the full range of digits, so skip
      that setting so it's not pulled in by BLE experimental feature flag.

commit 63c8c5700acb781ca9ac7c7985f78e0b95ff8130
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Dec 6 23:07:20 2023 +0000

    feat(bt): Add more experimental tweaks.

    * Support auto security upgrade for splits properly.
    * Disable 2M and legacy LLCP if the experimental
      Kconfig flag is selected.

commit 96f9031951f4edc3477b523e5cc33bafe8017482
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Dec 7 10:41:40 2023 -0800

    fix(build): Only copy if zephyr module detected

    * To fix issues with breakage with existing user config
      repos, only do our copy strategy if we detect a zephyr module
      present in the repo as well.

commit 384637ae6c8073ef7e5ac87db111c8aaab972015
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 22:36:04 2023 -0800

    fix(docs): Fix text blurb about split Kconfig.defconfig

commit 09d47d81176175ed104d6b1de1bae804dfbca9fc
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Tue Dec 5 14:14:06 2023 -0800

    refactor(docs): Convert breaks to unordered lists in tables

    Co-authored-by: Joel Spadin <joelspadin@gmail.com>

commit 55bf7cae7e67a57831ccd003061d60859deb9ff9
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 23:28:41 2023 -0800

    feat(docs): Note how parameters are forwarded for behaviors

commit 56d863cba6e26c49a43b6b1bf0404765823dfad6
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 23:04:28 2023 -0800

    feat(docs): Document sensor-rotate in behaviors config

commit 2bab81a3046302c4c07d93150e35ca39b87af560
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 23:16:58 2023 -0800

    fix(docs): Note -var definition files for macros

commit 76a209c728415e0cd6d3ab5400e42709c6aabf03
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 23:02:35 2023 -0800

    fix(docs): Fix sticky key #binding-cells

commit f3ad08b619c5c1e6fd95df01fd98eef2207d6aa8
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 22:48:47 2023 -0800

    fix(docs): Add missing page pointers in behaviors config

commit 88338a9b3cc9b87d48ad1845cffb51b57cffbcb3
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Dec 6 20:05:29 2023 +0000

    feat(shields): Add ZMK Uno split setup

    * Make it easier to test split code with ZMK Uno
      hardware by adding a split left/right setup as well.

commit 291bbc22572fb91cc4c773cf7d6b0e88f49eee38
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Nov 27 01:57:17 2023 +0000

    refactor(docs): New shield guide to suggest modules

    * Update the new shield guide to position Zephyr module location
      as the default when creating new shields, with a note about
      using ZMK repository itself as a last resort.
    * Document building with additional Zephyr modules.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 3656ec63d01ef99258ed7c4ee6cb7132898ac71e
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Nov 25 00:55:11 2023 +0000

    feat(build): Build unified config/mod repos.

    * Detect in our build script if our config repo is *also* a Zephyr
      module and if so pass to ZMK build in ZMK_EXTRA_MODULES
      define.
    * Copy config directory contents to new independent temp workspace
      to avoid Kconfig conflicts between the build repo's zephyr module
      directory and the checkout zephyr pulled in by `west update`.

commit efd403a56773a59c01478037c5739ff6c35c9de8
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Nov 6 17:59:01 2023 +0000

    refactor: Hook into CMake loading in a better spot.

    * Shift to using an extra Zephyr module to do keymap location
      work after all board roots are resolved. This avoids duplicate work
      and allows us to load custom boards from Zephyr modules as well as
      user config setups.

commit 0ab6a0ad11d0eb65f2cdca959a840e3331aa599a
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Dec 4 19:11:12 2023 +0000

    feat(bt): Add new experimental Kconfig setting.

    * In order to have an easy way to test and phase in BT changes, add a
      new `ZMK_BLE_EXPERIMENTAL_FEATURES` Kconfig setting.

commit 17a6f0b1285030d2d2b5a7d5197a91ec0aae7aff
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Mon Dec 4 18:31:42 2023 -0600

    refactor: Remove new uses of label property

    Removed new uses of the "label" property which were introduced after
    the previous commits on this branch were written.

commit 0fd8e25807b15eaac8edf818d46be8d004885f62
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sat Nov 18 19:49:49 2023 -0600

    docs: Document behavior name length limit

    Added a section to the new behavior guide to document that the names of
    behaviors invoked on the peripheral side of a split must be at most 8
    characters long.

commit 23ecf081192959f66f5cc064ed81c69f2988e3e7
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sat Nov 18 00:47:01 2023 -0600

    refactor(behaviors)!: Remove labels from behaviors

    Removed the label property from built-in behaviors, custom behaviors
    defined in a few keymaps, and macros generated with ZMK_MACRO().

    Now that node names are used to identify behaviors, and names only need
    to be unique within the set of behaviors, the names of all behaviors
    have been shortened to be similar to their original labels.

    This means that any keymaps which reference behavior nodes by name
    instead of by label will need to be updated. Keymaps typically use the
    labels though, so most keymaps should be unaffected by this change.

commit 36eda571b77fb03e0af51caf4f5f1d2c7d43b3d5
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sat Nov 18 19:19:15 2023 -0600

    refactor(behaviors): Create a list to lookup behaviors

    Added BEHAVIOR_DT_DEFINE() and BEHAVIOR_DT_INST_DEFINE(), which work
    exactly like the DEVICE_*_DEFINE() macros, except they also register the
    device as a behavior by adding a pointer to it to a memory section.

    Added zmk_behavior_get_binding(), which works like device_get_binding()
    except that it only searches the devices that have been registered as
    behaviors. This ensures that behaviors cannot have name collisions with
    other devices defined by the SoC, which will be important when we remove
    the label property from behaviors so they are given their node names.

    As an added benefit, this is faster since it searches a smaller list.
    Some basic benchmark code I wrote indicates it takes 30-70% as long,
    depending on where the behavior is in the list and whether the name
    string is an exact pointer match.

    From now on, behaviors should use BEHAVIOR_*_DEFINe() instead of
    DEVICE_*_DEFINE(), and any code that looks up a behavior by name should
    use zmk_behavior_get_binding() instead of device_get_binding().

commit 5ecd3521f52bc08a811324d26f3b539cfeb2158c
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Fri Oct 6 20:49:58 2023 -0500

    docs: Remove label property from documentation

commit d4e8dee44479864af5bef1b88a71d40b9e8edabf
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Fri Oct 6 20:04:41 2023 -0500

    refactor(keymaps): Rename layer label to "display-name"

    Changed the property used to define a layer name for displays from
    "label" (which affects other things in Zephyr and is deprecated) to
    "display-name". (It cannot be named simply "name", because that has
    special meaning in newer versions of the devicetree compiler.)

    "label" is still supported as a fallback, so no changes need to be made
    to existing keymaps.

commit ba5637fdefc5aff8e57ec9172887405dcb363bb1
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Fri Oct 6 19:53:37 2023 -0500

    refactor: Remove unimportant labels

    Removed "label" properties which no longer have any function.

    Labels are still used as layer names and as identifiers for sending
    behaviors between sides of a split keyboard, so those have been left
    alone for now.

commit 3ae9e740567081fceb1c67ad403e4d94e983e08b
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sat Nov 18 00:39:11 2023 -0600

    refactor(drivers): Make label property optional

commit 05925c72d7303fe786455e64d2c938bdf6be3b0a
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Tue Sep 5 17:52:18 2023 -0500

    refactor(ext_power): Remove label property

    Changed the label property on zmk,ext-power-generic to be optional and
    removed it from existing uses. Renamed the nodes for all non-development
    boards to "EXT_POWER" to preserve user settings.

    rgb_underglow.c now finds the correct device by finding the first
    instance of zmk,ext-power-generic instead of looking for a node named
    "EXT_POWER".

commit 179bdbc41a85165d3d535cd3b0df410ad0621662
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Tue Sep 5 11:35:51 2023 -0500

    refactor(behaviors): Make label property optional

    Changed all code (except for layer names) which used the label property
    to use DEVICE_DT_NAME() instead, which uses the label if set or falls
    back to the full node name. This matches how Zephyr determines the node
    names used with device_get_binding() and allows us to start removing the
    deprecated label property from things.

commit dbe5dfb1d841f55f2ad853275206aa706d24770b
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Mon Dec 4 23:31:35 2023 +0000

    feat(split): Add is_bonded function to peripherals

    There is already a function to see if the peripheral is connected, a matching one for if it's bonded is a useful addition for displays/indicators. `is_bonded` gets reset to false in the advertising function in preparation for runtime peripheral bond clearing

commit 9bacaffe6244fd00329f959700e2fd52b241c520
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Mon Dec 4 23:24:05 2023 +0000

    feat(hid): Add KConfig option for higher NKRO usages

    By default the maximum NKRO usage is set to maximise compatibility, but some keys dont work, this adds the ability to use those extended keys, at the cost of compatibiltity

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
    Co-authored-by: Pete Johanson <peter@peterjohanson.com>

commit 8ee3467adff4cd0ced085ee7778c99d42b1889c8
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 22:25:45 2023 -0800

    fix(docs): Update outdated information in the hardware page

commit 042e5209b3c2fc387793366d979f8bc986be2514
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun Dec 3 22:43:06 2023 -0800

    fix(docs): Fix table for BT_DISC

commit ecefd6d24b05124e2efcf3573ed8a32901d531d6
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Mon Dec 4 17:21:49 2023 +0000

    fix(docs): Update backlight docs (#1894)

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
    Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>

commit 55aed8e89d3d256b3e758be5bc5dfbb23ea04ece
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Dec 2 16:16:49 2023 +0000

    feat(tests): Add ability to auto-accept test diff.

commit c63d0791d52f2566bdca50895866339ce6fb947a
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Jul 13 22:16:44 2023 -0700

    chore: Ensure BSIM env. variables set in devcontainer.

commit 693530c2f1e7f8f59355b67878a7ed2c10f2b2bd
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue Jun 20 09:31:55 2023 -0700

    feat(bluetooth): Initial nRF52 BSIM based test support.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit da15564d0e7069e5f262e5d8351f1622b08a1118
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Jul 12 23:00:05 2023 -0700

    feat(bluetooth): Build on ARCH_POSIX.

commit 3fad4dba07c22cfbe6e54512cd2052da3aca4f10
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri Dec 1 23:33:29 2023 +0000

    fix(bt): Passkey entry pairing fixes.

    * Don't propogate any key press events while in the
      middle of passkey entry, avoid funky state on hosts.
    * Handle passkey on release, not press, to ensure key *releases*
      are not accidentally sent, especially the Enter release
      at the very end of passkey entry, which can trigger
      cancel in the dialog if the keyboard is connected
      via USB to the same host.

commit 329d6474ee4eed9791d53f9dcfc6dd0ec6401701
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Nov 30 06:48:35 2023 +0000

    feat(ble): Make it possible to use BT_GATT_AUTO_SEC_REQ

    * Only upgrade security of new connections if BT_GATT_AUTO_SEC_REQ
      is not enabled.

commit 744f70c80c84cc0e471db41c3834a4030b4743dc
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri Dec 1 23:39:31 2023 +0000

    feat(bt): Add support for unauth overwrite

    * Properly handle the user enabling the
      `CONFIG_BT_SMP_ALLOW_UNAUTH_OVERWRITE`
      Zephyr flag and handle re-pairing to an existing taken
      profile from the same address.

commit 69f7bfb40911d4bbf9af0910d956a092d5fb9159
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Tue Nov 28 00:09:58 2023 +0000

    feat(boards): Kinesis Advantage 360 pro

    Add the Kinesis Advantage 360 Pro board definition.

commit 817ce8764fcb9ad89d3cb8464d18c07b7169ed25
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Nov 27 23:48:13 2023 +0000

    refactor: Move to `zmk_hid_indicators_t` type.

commit d9bb0d7d0e05c547d1138c48746a72660d2bf326
Author: Alessandro Bortolin <bortolin.alessandro@outlook.it>
Date:   Sun Nov 27 18:11:43 2022 +0100

    feat: LED indicators on peripheral side

commit 4e55c5f6e912ca02eebaf402137beb37fa1d3d8e
Author: Alessandro Bortolin <bortolin.alessandro@outlook.it>
Date:   Tue Sep 6 12:29:07 2022 +0000

    feat: handle LED indicators report

commit 6276e973d52863878933ac90d2b6a4a922e51fb3
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Wed Nov 15 20:24:22 2023 +0000

    feat(ble): Only update BAS when active

    Subscribes to the activity changing event, will stop the battery work timer when in idle or deep sleep, restart when board goes active

commit 84b93350b8be30d2b5a5b8f4e07fa86ce2bb1fe7
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Mon Nov 27 17:12:33 2023 +0000

    feat(docs): Document adding USB logging to a standalone board (#2039)

    Currently this is only documented in the zephyr 3.0 upgrade blog. This explicitly documents it as well as when it doesn't need to be applied (i.e. when a mcu board is already in use).

commit a3f30ee799598a95fc91befc4cb42385644b7e0a
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 10 22:40:55 2023 -0800

    feat(build): Add support for artifact-name in build.yaml, correctly

commit f77e38f2b980a2d8491523b1c89b11edc740021e
Author: Idan Gazit <idan@gazit.me>
Date:   Thu Nov 23 21:02:22 2023 -0800

    chore: Update devcontainer.json

    The format has changed slightly.

commit 0a4b1a6533f434e6bdb7f7f5c336aa3096a90ad7
Author: Chris Andreae <chris@andreae.gen.nz>
Date:   Tue Nov 21 05:00:10 2023 +0900

    feat(ble): add behavior to disconnect from BLE profile

    Adds new functionality and a behavior to disconnect an active BLE connection.
    The motivation for this is that for some devices like phones, the presence of an
    active BLE connection results in the onscreen keyboard being selected.

commit d7d9eed317b3f788370a8728afa449c5e525f2ca
Author: Alexander Krikun <krikun98@gmail.com>
Date:   Tue Apr 27 18:24:11 2021 +0300

    feat(mouse): Initial mouse keys support.

    * Add HID report/descriptor for a new report with mouse buttons,
      and x/y/wheel deltas.
    * New mouse key press behavior for press/release of mouse keys.
    * Add constants for HID main item values (e.g. data/array/absolute)
    * Define and use constants for our HID report IDs.

commit 8776911da5005d42cd0bdf108b23deca16d7ec82
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Wed Nov 15 18:03:30 2023 +0000

    feat(ble): Allow disabling BLE BAS reporting

    The battery reporting has been known to cause macOS computers to wakeup repeatedly. In some cases (e.g. display or custom lighting implementation) one might want to collect battery SOC without broadcasting over BLE

    * Update docs/docs/config/battery.md

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 3027b2a6e8f2896f7e08d5a502be50ad21f32d7f
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue Nov 14 07:50:48 2023 +0000

    chore(usb): Don't enable ZMK_USB_ROOT by default.

    * Some initial reports of crashes with this code enabled, so disabling
      by default for now pending further investigation.

commit f6716f869a0fd20ac9520e2808dc4183742436a5
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue Nov 14 07:03:25 2023 +0000

    fix(usb): Build with ZMK_USB_BOOT disabled.

    * Invert the logic so `get_keyboard_report` is sane when `ZMK_USB_BOOT`
      is disabled.

commit 2a1904e184c5802a50c13f2d0ceca63df7c1b7df
Author: Chris Andreae <chris@andreae.gen.nz>
Date:   Tue Nov 14 16:08:58 2023 +0900

    feat(boards): Add Glove80 to boards

    * Add board definition for MoErgo Glove80

commit afe65ead9c0f1418fa34bfa93325d0cce33c6c2c
Author: Pete Johanson <peter@peterjohanson.com>
Date:   Mon Nov 13 16:50:00 2023 -0500

    Revert "feat(build): Add support for artifact-name in build.yaml"

    This reverts commit c1bf35ce1de4b7d99c034300c9a813a0a3d11669.

commit 964c54139dcc5fca466eb2a6dc72b4092c7152a0
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Nov 13 11:00:28 2023 -0800

    fix(usb): Tweak how ZMK_USB gets enabled.

    * Previous version of multiple overrides of the default value of ZMK_USB
      were problematic. Move to using board _defconfig files for the
      defaults for those, along with proper `depends on` for ZMK_USB that
      accounts for split and split roles.

commit 7b4b5d4ff20957c3cba0d3e3eb679dd45c3181f5
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 10 22:01:31 2023 -0800

    fix(docs): Fix debouncing driver support note

commit a5c3edd51b46f45a7fdf9ff157f69296d7a9fddb
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 10 22:22:05 2023 -0800

    refactor(docs): Remove local build section in customization

commit 2554b5c88f4d304f311d9f29017ac6fbe948ca7a
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 10 22:08:37 2023 -0800

    fix(docs): Update boards in build examples to common+uf2 ones

commit c1bf35ce1de4b7d99c034300c9a813a0a3d11669
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 10 22:40:55 2023 -0800

    feat(build): Add support for artifact-name in build.yaml

commit 91aa3378f32f5688329a663fdaba4772e069d548
Author: Chris Andreae <chris@andreae.gen.nz>
Date:   Tue Nov 14 03:04:04 2023 +0900

    feat(usb): Add boot protocol support

    * USB boot protocol support
    * Use a single definition of a boot report, used for regular reports in
      non-6KRO, and for rollover in all branches.
    * Handle gaps in the zmk report when producing a boot report in HKRO mode. For
      .example, if it was 8KRO, it would be possible to have the state 0 0 0 0 0 0 0
      17 (by pressing 8 keys, and letting go of the first 7). Copying the first 6
      bytes would not show up the single pressed key.
    * Disable usb status change and callback on SOF events:
      SOF events were introduced by the boot protocol changes, and required internally
      by Zephyr's idle support, but are unused within ZMK itself. Ignore them in the
      usb status callback.

    ---------

    Co-authored-by: Andrew Childs <lorne@cons.org.nz>

commit b80c0be0cedf42b58be2fc431b2a673ab9760c64
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 3 23:20:23 2023 -0700

    feat(blog): Add keymap editor post for spotlight series

    Co-authored-by: Nick Coutsos <nick@coutsos.com>

commit 5b49bc10cd7251bb9a90c018410abfc557fa0e9c
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Nov 3 23:20:42 2023 -0700

    feat(blog): Show all posts on sidebar

commit c2d220fbdf2c9ae6957d080a47545aa28e3ec275
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Nov 8 22:05:53 2023 +0000

    refactor(hid): Use proper defines for HID values.

    * Add report ID defines and use them consistently.
    * Add defines for main item value flags to avoid magic constants.

commit 34c8b3f1e30725d2711d5a75cd2da8e60da7b995
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Oct 18 02:33:03 2023 +0000

    refactor: Update boards/shields for encoders.

    * Update existing boards/shields for new `steps` and
      `triggers-per-rotation` set up.

commit 8d09809ef0cfb29c4481e1b31327e0866c2fb902
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Oct 18 01:19:14 2023 +0000

    fix(docs): Updated encoder config docs.

    * Update new shield guide for new sensor/encoder settings.
    * Add DTS section to encoder config docs.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 9e8ee8684252aecca36c1e6f2403b0a9fd3ebf4f
Author: Nick Coutsos <nick@coutsos.com>
Date:   Sun Oct 22 12:05:49 2023 -0400

    chore(docs): Fix links to relocated files (#1975)

commit 82e85699edd7261500ea2feb0697f8a6a5bbd42c
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Thu Oct 19 22:04:04 2023 +0100

    feat(docs): Document ZMK_BATTERY_REPORTING config (#1971)

    `CONFIG_ZMK_BATTERY_REPORTING` is currently undocumented, A new KConfig section for battery has been added in line with the other sections in the configuration section of the docs, `CONFIG_ZMK_BATTERY_REPORT_INTERVAL` has been moved from system to battery for consistency

commit 7fe9ecd87f086fe6fcf253559e751fab575faa5c
Author: Khalid Aj <kh411dz@gmail.com>
Date:   Wed Oct 18 05:43:50 2023 +0700

    feat(shields): Add Reviung53 shield.

    * Initial Reviung53 shield

    ---------

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 3b1d04372b0a013ec2738019166c1c2e85bf0ba7
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Fri Oct 13 14:58:27 2023 -0500

    feat: Print Kconfig and DTS for failed builds

    Added the combined devicetree file to the user config build action. Set
    it and the Kconfig output to run even on a failed build.

commit a9a53e6da490e319bae5efa85c221010a2578b15
Author: Alex Kang <akang95@gmail.com>
Date:   Sat Oct 14 19:39:42 2023 -0700

    feat(shields): Reviung34 shield definition

    * Initial implementation of REVIUNG34 shield.
    * Add copyright information to files
    * Added a README with instructions on how to enable the 1x2u layout.
    * Add a default chosen matrix transform in the default keymap, alongside a commented out version for the alternate layout.

    ---------

    Co-authored-by: Peter Johanson <peter@peterjohanson.com>
    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 3ab922822c0b1bbf99e9ea50f17fe15dcef6c3f3
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Oct 2 22:05:24 2023 -0700

    feat(shields): Add ZMK Uno nice!view support.

    Export the `nice_view_spi` node properly from the ZMK Uno overlay
    to ensure the shield will work when built along with the `nice_view`
    shield.

commit a9f677007bccc3d2c0d988d3b1f45bb7d79d6131
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Tue Oct 10 20:09:15 2023 -0700

    fix(blog): Correct incorrect info re: global-quick-tap

commit 0c06023ca03fe2e7e7d5f7abe24b3f5d835b5b5f
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Tue Oct 10 22:58:15 2023 +0000

    chore(deps): bump postcss from 8.4.18 to 8.4.31 in /docs

    Bumps [postcss](https://github.com/postcss/postcss) from 8.4.18 to 8.4.31.
    - [Release notes](https://github.com/postcss/postcss/releases)
    - [Changelog](https://github.com/postcss/postcss/blob/main/CHANGELOG.md)
    - [Commits](https://github.com/postcss/postcss/compare/8.4.18...8.4.31)

    ---
    updated-dependencies:
    - dependency-name: postcss
      dependency-type: indirect
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit 6c75d6986c3dfaf7562783476059349c0814792a
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Mon Oct 9 15:08:45 2023 +0100

    feat(docs): Document globe key specific quirks

commit 65667b863ad380955da60d38ac2ae81b4dab06f5
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Fri Oct 6 22:05:49 2023 -0500

    docs: Add syntax highlighting to more code blocks

    Added language tags to more code blocks in the documentation to enable
    syntax highlighting.

commit 4a339093cebd9e89e531f78dc218907a292cbb1b
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Fri Oct 6 22:02:23 2023 -0500

    docs: Add highlighting for devicetree and kconfig

    Added syntax highlighting for devicetree and kconfig files.

    The PrismJS project is not accepting contributions right now as they
    work on a version 2 of the library, so the new language files are added
    directly here.

    Also enabled syntax highlighting for various languages that are used in
    the docs but aren't enabled in Docusaurus by default.

commit 6af22424f1a7cdbe1845ffab96cae8aa9ed9c5d9
Author: Diogo Doreto <diogo@doreto.com.br>
Date:   Tue Mar 21 14:36:53 2023 +0100

    feat(shields): add right encoders support to waterfowl

commit 791711b5556adee55ff9f9c68cdf4ab7fa0be117
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 14:22:18 2023 -0700

    feat(docs): Note how to use GPIO outside interconnect definition

commit 8a84b7dd5b843e69c8a2e74409c282cd3056c4ce
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Oct 8 18:30:23 2023 -0500

    fix(shields): Fix incorrect union access in nice view

    Fixed an error in a previous commit where a member of the selected
    endpoint was used without checking if it was the correct transport type.
    The nice!view status screen displays the active BLE profile regardless
    of whether BLE is active, so we have to get that data directly from the
    BLE code instead of from the selected endpoint.

commit fd05478897567bff34d607229636ae4d4507ef0f
Author: Alex Kang <akang95@gmail.com>
Date:   Fri Oct 6 12:27:38 2023 -0700

    feat(shields): Microdox V2 shield definition

    * Refactor common parts of the Microdox sheild into a separate file. This is in preparation for adding Microdox V2 as another shield in the same directory.
    * Refactor Microdox keymap into a common file in preparation for Microdox V2
    * Add Microdox V2 shield definition
    * Added a README to explain v1/v2 differences.

commit ca5c9b4ae6b7008b81c9f9cb02fb7d295b3290b0
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Thu Oct 5 19:53:15 2023 -0700

    feat(blog): Add SOTF #6 (#1943)

    Co-authored-by: Pete Johanson <peter@peterjohanson.com>

commit 913fdb831e4445bf26df74881fa74666a590020b
Author: Amettler Thierry <amthierry81@live.fr>
Date:   Wed Oct 4 22:29:06 2023 +0200

    feat(docs): Add configuration snippet for layer-taps

commit df92b0e37d5c53e23ffe60c7a8005eb311cff785
Author: Seth Milliken <seth_github@araxia.net>
Date:   Wed Oct 4 08:48:46 2023 -0700

    feat(shields): sofle: add underglow support with `&pinctrl` update

    * Sofle Shield: Add underglow support

    ---------

    Co-authored-by: Kim Streich <kim@infusedinsight.com>
    Co-authored-by: Seth Milliken <seth_zmk@araxia.net>

commit 11996ff7f05bdbe0d5ee59dc3b695d5e9d8c5c8d
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Tue Sep 26 22:00:23 2023 -0400

    refactor(behaviors): Final global-quick-tap deprecation.

commit 2234be0871cdab4c0d8bfc6abee3013716e5601a
Author: Andrew Rae <56003701+andrewjrae@users.noreply.github.com>
Date:   Mon Sep 25 09:15:57 2023 -0400

    refactor(docs): Apply suggestions from @caksoylar

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit f0f6d61e794633a06b04246ee31e276c9fbf3040
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Sun Sep 24 10:19:58 2023 -0400

    fix(tests): Updating old tests includes

commit b85ffa4b6cfb5e2a8c735534ac1b46dc52f8ad86
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Sun Sep 24 09:38:45 2023 -0400

    refactor(behaviors): global-quick-tap -> require-prior-idle

    Renaming global-quick-tap-ms to require-prior-idle.

commit 49c393e8f80701a8736b3e07bf7479c5b9a6592c
Author: Andrew Rae <56003701+andrewjrae@users.noreply.github.com>
Date:   Sun May 28 21:35:02 2023 -0400

    refactor(docs): Applying suggestions for gqt from @caksoylar

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 1e84e265b144602431d723e1080ebe32d87871e6
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Sun May 28 15:35:51 2023 -0400

    feat(docs): Adding global-quick-tap-ms docs

commit 77eb44ba9b14d0c47eb81001d6a90a3ec4e82b19
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Mon Jul 18 18:27:44 2022 -0700

    feat(behaviors): Adding global-quick-tap-ms for combos

    This brings the 'global-quick-tap' functionality to combos by filtering
    out candidate combos that fell within their own quick tap term.

    I also replaced `return 0` with `return ZMK_EV_EVENT_BUBBLE` where appropriate.
    (I assume this was done in past as it is similar to errno returning, but
    being that this is to signify an event type I find this more clear)

commit 2f6abff3bcb4f157d7b0d8eaa53faf2afebe7878
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Sat Jul 16 21:51:25 2022 -0700

    refactor(behaviors): Giving global-quick-tap its own term

    Detaching the global-quick-tap functionality from the quick-tap term.
    This makes way for two improvements:

    1. This functionality can be added to combos under a unified name
       'global-quick-tap-ms'.

    2. This allows users to set a lower term for the 'global-quick-tap'
       (typically ~100ms), and a higher term for the regular
       quick-tap (typically ~200ms)

    This deprecates the global-quick-tap option, however if it is set, the
    quick-tap-ms value will be copied to global-quick-tap-ms.

commit aa4cb143bf2de89f06039fd9ba0b259f6d38fc5d
Author: Flo Kempenich <flo@kempenich.dev>
Date:   Tue Oct 3 09:03:59 2023 +0100

    fix(combos)Fix bug with overlapping combos timeouts (#1945)

    * Fix bug with overlapping combos timeouts

    * Fix trailing whitespace

    * Fix log format

commit 6a3cc914fcc0ecc01f33f81413080b882c3022c5
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Aug 27 18:33:29 2023 -0500

    fix: Fix nice_view display widgets

commit b17d896c5c30dbb038de36e7ed540318f9b048a1
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Aug 27 18:03:06 2023 -0500

    fix: Address review comments

commit 651ed05e9aab061703fb6e3736c974702310a9e1
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun May 14 11:55:21 2023 -0500

    refactor: Split endpoint to transport and instance

    Changed the endpoints code to rename the existing endpoint types to
    "transport" and add the concept of "endpoint instances". A transport is
    the method by which data is sent, while instances allow describing
    multiple endpoints that use the same transport (e.g. bluetooth profiles)

    Also added new APIs to get the total number of possible endpoint
    instances and assign each instance a unique index, which can be used
    for tracking separate state for each endpoint in other code files.

commit 2f05ad55ca9734f1cc890dcd659d0691ce327658
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Sat Sep 16 17:24:39 2023 -0400

    fix(core): Prevent pre-releasing explicit mods.

commit dffdb2365e1ff977020a1c62967512b196edee2c
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Tue Jun 6 20:42:52 2023 -0400

    test(core): Adding coverage for key pre-releasing.

    Added cases for the two use cases I know of:
        1. Rolling with key-repeat behavior
        2. Rolling symbols that have the same base key, eg `+=`

commit 933e369d7cacd2680cd8c1355eb7e4a35b4e34f9
Author: Andrew Rae <ajrae.nv@gmail.com>
Date:   Mon May 29 22:48:38 2023 -0400

    feat(core): Adding pre-release for keys that were already pressed.

    This fixes #1207 and #1076 (and maybe more?).

commit c1ebadcd2a1b7cad47c2224a4fb6130cda80b7e3
Author: ReFil <31960031+ReFil@users.noreply.github.com>
Date:   Fri Sep 29 21:14:31 2023 +0100

    feat(hid): Add apple globe keycode

    * feat(hid): Add apple globe keycode
    * Update docs/src/data/hid.js

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
    Co-authored-by: Pete Johanson <peter@peterjohanson.com>
    Co-authored-by: Nick Coutsos <nick@coutsos.com>

commit 9b3d2cb99fe806db5897063e372a5ae45a58b0ec
Author: zhiayang <500236+zhiayang@users.noreply.github.com>
Date:   Thu Sep 28 12:19:14 2023 -0400

    fix(driver): Fix broken compilation for MAX7318 driver

commit 07c82836e032ee4db64098e3b0aa26295b29b989
Author: ClicketySplit <101202583+ClicketySplit@users.noreply.github.com>
Date:   Thu Sep 28 09:54:08 2023 -0600

    fix(shields): Leeloo-Micro set status disabled for encoders.

commit 8abc449cc29ef35ffd5770e9f7680348b8c708f7
Author: zhiayang <500236+zhiayang@users.noreply.github.com>
Date:   Mon Sep 25 21:04:03 2023 -0400

    feat(drivers): add driver for MAX17048 fuel gauge

    Add driver for MAX17048 fuel gauge for battery reporting.

commit 28ce23d4891eee3a1ef0a0d8187afe233d05cf81
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Sep 14 23:43:47 2023 -0700

    chore(tests): Move to proper header name.

commit 0ca7f69b6d21f0e24555d635a017459a8ed0fe43
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Sep 11 21:56:37 2023 -0700

    refactor: Promote debounce to exposed mod lib.

    * Promote previously local debounce code from kscan drivers to exposed
      module lib, for use with other drivers as needed.
    * Refactor existing kscan driver to new "public" API.

commit c28ef1b61e9feb748ff0823f7f226d67e14fd3aa
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Sep 2 20:28:47 2023 -0700

    refactor(drivers): Use proper init stage/priority.

    * Avoid APPLICATION stage and use the proper earlier stage for
      kscan drivers.

commit 690bc1bb44b1b62228900906cb308dc6f1a05eb8
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Sep 2 20:07:31 2023 -0700

    refactor: Move drivers into properly module.

    * Align our driver module layout to properly match Zephyr conventions,
      allowing proper CMake setup to amend the library for each type of driver.

commit eaeea4bdfa2d67c7faea8e5f77b638723ebfe5e9
Author: Jeppe Klitgaard <jeppe@dapj.dk>
Date:   Tue Sep 12 08:32:09 2023 +0200

    feat(docs): Add missing `&kp` tip for `devicetree_unfixed.h` error

commit 7f9e9f8c64f3128c2c3e7af3f22ced665fe1b873
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Tue Sep 5 22:23:44 2023 -0700

    fix(boards): Disable QSPI for Xiao BLE

    The GD25Q16 flash connected via QSPI seems to be causing issues
    with excessive battery use and inability to sleep. Since ZMK doesn't
    use it, disable it.

    Resolves #1901

commit f442776fe2bea2a3644d0767a2cf1e975c6d9b38
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Jun 10 17:41:22 2023 -0700

    feat(docs): Detail logging and note extra useful options

commit 8087fa3b2b8bb0590e7cf5de6d22b03acd9411a4
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Tue Sep 5 05:12:55 2023 +0000

    chore(deps): bump @fortawesome/fontawesome-svg-core in /docs

    Bumps [@fortawesome/fontawesome-svg-core](https://github.com/FortAwesome/Font-Awesome) from 6.4.0 to 6.4.2.
    - [Release notes](https://github.com/FortAwesome/Font-Awesome/releases)
    - [Changelog](https://github.com/FortAwesome/Font-Awesome/blob/6.x/CHANGELOG.md)
    - [Commits](https://github.com/FortAwesome/Font-Awesome/compare/6.4.0...6.4.2)

    ---
    updated-dependencies:
    - dependency-name: "@fortawesome/fontawesome-svg-core"
      dependency-type: direct:production
      update-type: version-update:semver-patch
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit 693875675fec96b46c687540ef46a17fa4132779
Author: Nate Eagleson <nate@nateeag.com>
Date:   Mon Sep 4 19:59:59 2023 -0400

    fix(docs): Fix typo in caps-word.md (#1924)

commit 718500543b6d087ce8aac00caac173030b75be16
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Sep 2 01:45:12 2023 -0700

    feat(split): Use directed advertising.

    * Split centrals to scan with their identity so they receive direct
      advertising packets.
    * Split peripherals to use direct advertising if they have an existing
      bond to a split central.

commit 3936298260699d88f8fb8c839991128ed0edfafa
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Mon Sep 4 05:18:02 2023 +0000

    chore(deps-dev): bump eslint-plugin-react from 7.32.2 to 7.33.2 in /docs

    Bumps [eslint-plugin-react](https://github.com/jsx-eslint/eslint-plugin-react) from 7.32.2 to 7.33.2.
    - [Release notes](https://github.com/jsx-eslint/eslint-plugin-react/releases)
    - [Changelog](https://github.com/jsx-eslint/eslint-plugin-react/blob/master/CHANGELOG.md)
    - [Commits](https://github.com/jsx-eslint/eslint-plugin-react/compare/v7.32.2...v7.33.2)

    ---
    updated-dependencies:
    - dependency-name: eslint-plugin-react
      dependency-type: direct:development
      update-type: version-update:semver-minor
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit 647945d9f8c80b7de8df8f9dc54bdcf865d531ad
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Jul 17 07:20:45 2023 -0700

    feat(shields): Add splitkb.com Aurora Helix

    * Add new shield for splitkb.com Aurora Helix, supporting
      keys, encoder(s), displays, and RGB.

commit 8984e12f0d0442b15e6fd18dfd48666bc4cbceb2
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Wed Aug 30 05:10:14 2023 +0000

    chore(deps-dev): bump json-schema-to-typescript in /docs

    Bumps [json-schema-to-typescript](https://github.com/bcherny/json-schema-to-typescript) from 12.0.0 to 13.1.1.
    - [Changelog](https://github.com/bcherny/json-schema-to-typescript/blob/master/CHANGELOG.md)
    - [Commits](https://github.com/bcherny/json-schema-to-typescript/commits)

    ---
    updated-dependencies:
    - dependency-name: json-schema-to-typescript
      dependency-type: direct:development
      update-type: version-update:semver-major
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit 3de23938d687badb346cd97f2e4003bc4357508c
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Wed Jul 19 08:51:44 2023 +0000

    chore(deps): bump word-wrap from 1.2.3 to 1.2.4 in /docs

    Bumps [word-wrap](https://github.com/jonschlinkert/word-wrap) from 1.2.3 to 1.2.4.
    - [Release notes](https://github.com/jonschlinkert/word-wrap/releases)
    - [Commits](https://github.com/jonschlinkert/word-wrap/compare/1.2.3...1.2.4)

    ---
    updated-dependencies:
    - dependency-name: word-wrap
      dependency-type: indirect
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit ac0691471f1adb8336fb7eb5d01f18c988c5bad8
Author: フィルターペーパー <76888457+filterpaper@users.noreply.github.com>
Date:   Thu Aug 3 10:26:34 2023 +0800

    feat(shields): Add Bluetooth bindings to kyria keymaps

    Bluetooth bindings are useful for handling pairings with hosts. This
    change adds the header and a few default commands as template for
    new users to work with.

commit 544612c8c0929ff3089bcdb86f9ea8a2f77081eb
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Fri Sep 1 23:32:17 2023 -0400

    fix(split): reserve peripheral slot before stopping scanning

    In the event that the peripheral MAC address does not match, this allows
    scanning to continue.

commit 4e18b879bdeab047e901856cf6a0cbf3a4855adc
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 15:26:00 2023 -0700

    feat(docs): Document persisted settings and debouncing

commit b20d3178b9d681f2b959cc7980d7252cda415189
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 14:11:30 2023 -0700

    feat(docs): Note devicetree limits re: macro bindings

commit 369c7c1721861c9a0e5e47c6b1090abe8cfb0566
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 14:10:59 2023 -0700

    fix(docs): Correct default macro wait/tap ms

commit 3d938033b002c78ce24245e3cf37b7ba55876145
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 14:45:25 2023 -0700

    feat(docs): Note GPIO flags and add examples

commit 1e11e84d0d367a90d155df1d13824077f61bf158
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 14:44:37 2023 -0700

    fix(docs): Fix row/col comments in matrix examples

commit fd4796583810b6fa42edcee7aa33fa9db4ba4a44
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sat Sep 2 13:49:18 2023 -0700

    fix(docs): Remove diode-direction from direct GPIO driver

commit 185457bc1169176037aa281edb0a9bf485a70dbd
Author: Mikhail Stralenia <mstralenya@gmail.com>
Date:   Tue Aug 29 18:53:30 2023 +0300

    fix(shields): leeloo - proper encoder status for split encoders.

commit a92a4967aa85f4ab19d36bcb81afc0420f2775d2
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Jun 28 19:26:33 2023 +0000

    fix(sensors): Only accept data once per behavior.

    * Don't accept data for the same behavior on multiple layers more than
      once, to avoid duplicate/extraneous triggers.

commit dcb1f8f13528effc3e2ee3dadf9b385bf2394037
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri Jun 23 07:28:27 2023 +0000

    fix(docs): Update docs about split encoder support

commit 9d4422980088fb6d2130ac9a3119809984762267
Author: Stephen Wan <stephen@stephenwan.com>
Date:   Mon Mar 15 12:26:18 2021 -0700

    feature(split): add support for sensors from peripheral

    This commit adds a new GATT characteristics on the peripheral side
    and wires it up to read sensor values. The central side subscribes
    to this new characteristics and replays sensor values on its side.

    Co-authored-by: Peter Johanson <peter@peterjohanson.com>

commit c957348e6187ffde3c073e8c367a60a7ee16b12c
Author: Seth Milliken <seth_github@araxia.net>
Date:   Tue Aug 8 15:12:46 2023 -0700

    fix(docs): detail overriding the `led_strip` `chain-length` property

    Quite a few people have struggled with setting the correct
    `chain-length` for their `led_strip`. For some, this is their first time
    needing to change a pre-defined devicetree property, and so they aren't
    familiar with the technique. I commonly see folks adding a duplicate of
    the entire `*.overlay` file with only the `chain-length` value changed.
    Having clear documentation for this specific application of the property
    override technique could help forestall these problems, and give those
    of us helping out in Discord something to easily reference.

commit d17c473d45b3bd01d80b8a5eab417986be0281da
Author: Jorge Villalobos <minusfive@users.noreply.github.com>
Date:   Wed Aug 2 12:57:00 2023 -0400

    feat(docs): Improve parameterized macros docs

commit e65a7e3075a7a153ea478d4fd293ae65b31e33ed
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Thu Jul 20 16:48:02 2023 -0400

    fix(battery): change nRF52 ADC gain

    With ADC pin, maximum 3.6V input needs gain 1/6 to be less than the 0.6V
    reference.

    With VDDHDIV5, maximum 6V input corresponds to 1.2V so gain 1/2 will be less
    than the 0.6V reference and be slightly more precise.

commit cb9c573b534dcb52ee8cf6b2cec6cb880e841301
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Mon Jul 17 17:32:14 2023 -0400

    refactor(underglow): turn underglow off in low priority work queue

commit 9a963abfc8b27c6fdfb5b6b4b38e5905d6a360a7
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Mon Jul 17 17:16:04 2023 -0400

    refactor: use low priority workqueue for underglow and battery reporting

    Blocking operations on the high priority system workqueue may result in
    deadlocks, particularly when Bluetooth is in use.

commit f743d57ff1d4d68f51fb11b99fc0217eeca42919
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Jul 10 22:44:44 2023 -0700

    feat(shields): Add splitkb.com Aurora Sofle

    * Add new shield for splitkb.com Aurora Sofle, supporting
      keys, encoder(s), displays, and RGB.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 147f7f23dca7a2eb5d7433d399948cfd51e068a9
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Jul 20 23:53:38 2023 -0700

    fix(shields): Make settings_reset more flexible.

    * Don't reference `pro_micro` nexus node in settings_reset
      so it can be used with other controllers.
    * Use mock kscan node instead.

commit 5f6a13413bba84eeb1eb89c4ff2a5710ca552e6b
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Jul 20 23:34:09 2023 -0700

    fix(bluetooth): Split improvements

    * Proper usage of bt_uuid_cmp.
    * Central's don't start scanning for peripherals if
      `ZMK_BLE_CLEAR_BONDS_ON_START` is enabled.
    * Split peripherals don't advertize if
      `ZMK_BLE_CLEAR_BONDS_ON_START` is enabled.

commit 54c2e8e155e9be71026251946c98e8e45c989388
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Jul 20 06:35:41 2023 +0000

    feat: Add more logging to peripheral settings.

commit ed400c4feb7955bdc839fbf33b463a73c898a033
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Jul 19 16:21:06 2023 +0000

    fix(bluetooth): Corrected use of `bt_addr_le_cmp`

    * Properly compare to zero when comparing LE addresses.

commit 73e1b526d56376be09908a3726fbe9553052e447
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Jul 19 14:59:40 2023 +0000

    fix(bluetooth): Properly clear peripheral slots

    * When the clear bonds Kconfig is set, also clear peripheral
      address slots addresses from settings as well.

commit b945ffe943f1639bfe992ddb4bc12f968d3858f9
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Wed Jul 12 15:07:59 2023 +0000

    chore(deps): bump semver from 5.7.1 to 5.7.2 in /docs

    Bumps [semver](https://github.com/npm/node-semver) from 5.7.1 to 5.7.2.
    - [Release notes](https://github.com/npm/node-semver/releases)
    - [Changelog](https://github.com/npm/node-semver/blob/v5.7.2/CHANGELOG.md)
    - [Commits](https://github.com/npm/node-semver/compare/v5.7.1...v5.7.2)

    ---
    updated-dependencies:
    - dependency-name: semver
      dependency-type: indirect
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit cec2061dada6b18580ce20f0c1c70df38aa2a379
Author: Maciej Konieczny aka narf <narfdotpl@users.noreply.github.com>
Date:   Wed Jul 19 21:59:29 2023 +0200

    fix(docs): Fix typos in parameterized macros docs.

commit ee1e13510410e9b482fd20acf112bc3f1466c362
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Tue Jul 18 23:21:09 2023 -0700

    fix: Proper battery sensor Kconfig dependencies.

    Properly make the battery sensor Kconfig symbols depend
    on `SENSOR` config, and minor battery reporting Kconfig
    symbol dependency fix.

commit 51a4be89355550ccdc00833c18ceaba5ddabcb51
Author: Nick Winans <nick@winans.codes>
Date:   Tue Jul 18 16:55:32 2023 -0500

    fix(displays): Don't enable built-in widget configs by default

commit 18a2b76bf085249e9d650d6664d32931c56dc7b7
Author: Nick Winans <nick@winans.codes>
Date:   Tue Jul 18 16:43:30 2023 -0500

    feat(nice!view): Custom widgets

commit f3110d1d1ea195725551b4c997c542a4003e1452
Author: NAHO <90870942+trueNAHO@users.noreply.github.com>
Date:   Tue Jul 18 00:23:22 2023 +0200

    fix(docs): Fix README punctuation and add license link

commit aaf9958d865ac28659d16e1ea1ba356f7e742ea8
Author: ClicketySplit <101202583+ClicketySplit@users.noreply.github.com>
Date:   Mon Jul 17 15:26:27 2023 -0600

    feat(boards): Leeloo v2 and V2 Zephyr 3.2 fixes

    * Add Leeloo v2
    * Leeloo-Micro v1 updates to support Zephyr 3.2
    * Refactored for new Encoder Configuration

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit bbb27ac02769c7bf5f20b76605f2b4e0f811e6e0
Author: フィルターペーパー <76888457+filterpaper@users.noreply.github.com>
Date:   Fri Jul 7 01:39:08 2023 +0800

    feat(docs): Note that UF2 drive unmounts after flashing (#1859)

    Add a note about the UF2 drive that automatically unmounts itself
    to restart, which may surprise some new users.

commit 3772ecb04e777ec4d592711427211cfac26a712d
Author: Kyle McCreery <mccreery.kyle@gmail.com>
Date:   Wed Jul 5 12:50:19 2023 -0400

    fix(boards): Update pillbug_defconfig to enable pinctrl

commit b259d5a22e423458b94bd1aba70fd62f327528c0
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue Jun 20 22:23:06 2023 +0000

    fix(sensors): Sensor rotate behavior fix for layers.

    * Properly return transparent value when processing mode
      for higher disabled layers means the processing is ignored.

commit 805dd4a53bc9ff7fe1f7eb5c9ea332a9affbc5f9
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri Apr 8 15:38:46 2022 +0000

    feat(behaviors): Support parameterized macros.

    * Add two new compatibles for macros that
      take one or two parameters when bound in
      a keymap.
    * Use `&macro_param_1to1`, `&macro_param_1to2`, `&macro_param_2to1`,
      and `&macro_param_2to2` control entries in the bindings for the macro
      to have the next binding entry have it's values substituted.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit e686fce4d917b708da7f2baba4115043d3f0deab
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Fri May 19 18:41:08 2023 -0400

    refactor(split): allow central to define connection parameters

    Fixes #1614

commit 5763558a02154ab599775c770fcf954931816e52
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue May 30 02:38:28 2023 +0000

    feat(blog): Add post about sensor refactor.

    * Document changed configuration, support for other Zephyr
      drivers, next steps.

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 753802cd79ce12d2e5d86c72ced3a4cc76fe4564
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sun Jun 18 05:59:31 2023 +0000

    fix(sensors): Clean ups based on code review.

commit 3a91b325138dfba8ede743aec28e2cdbc85d17d2
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue May 16 22:27:01 2023 -0700

    refactor(sensors): Use "sensor index" consistently

commit 8b29f6d34556d98df60f529e84ee66e49e6bf0c0
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu May 4 00:04:20 2023 +0000

    refactor(sensors): Split data handling from triggers.

    * All sensor behaviors should see sensor data, then selectively
      only have some trigger their behaviors.

commit d781ec795b9d9e053ce71c30450ba2b979eab43b
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Tue Apr 18 07:14:18 2023 +0000

    refactor(bluetooth): Add battery reporting config.

    * Add dedicated battery reporting Kconfig that is `imply`d by
      enabling ZMK_BLE.

commit f8aaaff556e1c43c6646ea1c1ee7faa2907cdf51
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sun Apr 16 08:18:57 2023 +0000

    refactor(shields): Updated ZMK Uno encoder config.

    * Move to new steps/triggers-per-rotation config.
    * Leverage QDEC Nordic driver when used on Nordic DK.

commit 621d946d2926f28aa866947f110182726fa9ca10
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sun May 21 21:27:41 2023 -0700

    refactor(bluetooth): Bump HoG stack size.

    * Bump the default stack size for the HoG processing thread
      to avoid issues w/ some pathways.

commit f0f7e2081b5a4aa5bc35d7d8855b0e73e962319b
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu May 26 16:53:41 2022 +0000

    refactor(config): Select SENSOR as needed.

    * Don't force on SENSOR Kconfig setting unless
      needed based on the detected DT.

commit 295ed83409ab0bede761eb2e51f4e4670e4dbf08
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Thu Dec 2 15:07:29 2021 +0000

    refactor(sensors): ec11 rotation sensor value in degrees.

    * Add new `steps` property to the `aips,ec11` binding, to make
      the driver properly report degrees in the rotation delta channel.
    * Handle old sensor values in sensor rotate behavior.

commit 2244bd3d81931753dfd170e804a90a487a205aa1
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Wed Sep 1 03:49:18 2021 +0000

    refactor(sensors): Sensor event channel data, resolution tweaks.

    * Refactor sensor events to include channel data,
      necessary for prop split encoders, and avoiding duplicate calls,
      to fetch channel data twice, etc.
    * More consistent behavior driver API.
    * Allow setting triggers per resolution at the behavior level optionally.

commit dcf5e75fa674184d9615793882db1c3f4c4194b9
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun May 14 13:08:33 2023 -0500

    fix(boards): Bump nRF5340 DK I2C buffer size

    Increased the I2C buffer size again, since it needs to be at least 641
    to support 128x64 displays.

commit 9ff1eaeb5a5f892d17ca87c38697466fd48fc301
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun May 14 11:44:49 2023 -0500

    fix: Enable BT_TINYCRYPT_ECC when using HCI

    BT_TINYCRYPT_ECC is required for BT_SMP_SC_PAIR_ONLY to work on setups
    that use BT HCI like the nRF5340.

commit 9d714c0b69fee2098a010d29e534051aeca26386
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Sun Jun 11 06:47:34 2023 +0000

    chore(deps-dev): bump webpack from 5.80.0 to 5.86.0 in /docs

    Bumps [webpack](https://github.com/webpack/webpack) from 5.80.0 to 5.86.0.
    - [Release notes](https://github.com/webpack/webpack/releases)
    - [Commits](https://github.com/webpack/webpack/compare/v5.80.0...v5.86.0)

    ---
    updated-dependencies:
    - dependency-name: webpack
      dependency-type: direct:development
      update-type: version-update:semver-minor
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit 0be0d0763081de0c163dd26c29752d1085381dbb
Author: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Date:   Sun Jun 11 04:35:54 2023 +0000

    chore(deps): bump minimatch and serve-handler in /docs

    Bumps [minimatch](https://github.com/isaacs/minimatch) and [serve-handler](https://github.com/zeit/serve-handler). These dependencies needed to be updated together.

    Updates `minimatch` from 3.0.4 to 3.1.2
    - [Release notes](https://github.com/isaacs/minimatch/releases)
    - [Commits](https://github.com/isaacs/minimatch/compare/v3.0.4...v3.1.2)

    Updates `serve-handler` from 6.1.3 to 6.1.5
    - [Release notes](https://github.com/zeit/serve-handler/releases)
    - [Commits](https://github.com/zeit/serve-handler/compare/6.1.3...6.1.5)

    ---
    updated-dependencies:
    - dependency-name: minimatch
      dependency-type: indirect
    - dependency-name: serve-handler
      dependency-type: indirect
    ...

    Signed-off-by: dependabot[bot] <support@github.com>

commit 9d39a87f67668b4c083e09b04adf006d6fd1385d
Author: pixls <github@dev.snack.supply>
Date:   Sat Jun 10 20:49:30 2023 -0400

    fix(docs): Change user-setup.md order to agree with order in setup script

    Fixes #1281

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 98524a95671fe9d819a65d1515f9bc37895efc3d
Author: kadoyau <11990327+kadoyau@users.noreply.github.com>
Date:   Sun Jun 11 04:32:50 2023 +0900

    fix(docs): Fix INT6 keycode description

commit a5c57fa224ba410100dde4e64222505bfb2b89ea
Author: Albert Y <76888457+filterpaper@users.noreply.github.com>
Date:   Tue Jun 6 13:22:39 2023 +0800

    feat(docs): Add an example for combining just modifiers (#1826)

    Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>

commit 5d9ae8fffa869f36e3e0911bed92d41ed8640826
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Fri Jun 17 17:44:31 2022 -0400

    feat(split): allow central to connect to multiple peripherals

commit f08802eaa735b87fa089b81512a941a1bcc8ca4b
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Mon Jun 5 05:04:13 2023 +0000

    fix(boards): Proper i2c pinctrl for BlueMicro840

    * Use the proper pin assignmets after the move to pinctrl for the
      Zephyr 3.2 migration.

commit 19d883cdfe679977023116dcf689ce67a6ce548d
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Sat Jun 3 02:53:20 2023 +0000

    fix(bluetooth): Passkey pairing improvements.

    * Capture the last 6 entered digits, and then require pressing
       Enter/Return to submit the entered digits. This matches the
       messaging shown on hosts regarding how to complete pairing.
    * Fix the wording on the Kconfig menu item to accurately describe
      the feature.

commit ace11e327fbfb4c4c894bb66328156d4d0b7eda0
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Jun 2 20:46:13 2023 -0700

    fix(docs): Fix broken link in BT troubleshooting

commit 0682bc3aa6d9b9deac48b5aa6c781241075819b3
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Jun 2 18:45:15 2023 -0700

    feat(docs): Note split connectivity improvement with TX power

commit a9ad11f91e82e214d91cf9bf1586431060759f06
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Fri Jun 2 18:42:50 2023 -0700

    refactor(docs): Move BT troubleshooting items to BT page

commit 30ba4b08aed896d77fb7ade96ef0334d8f30af5d
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Mon May 29 22:06:09 2023 -0700

    feat(docs): Add pointer to Bluetooth page in troubleshooting

commit 4042aea66f09cfc2d62fe1313f7bcbae98aab200
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Mon May 29 22:03:24 2023 -0700

    feat(docs): Add troubleshooting for Windows issue

commit 0508718d6ce8b40adbe932b0bd9bb30ee5e0bbf5
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Mon May 29 21:52:16 2023 -0700

    feat(docs): Add behavior types section for hold-tap

commit a2af74f5ab4d2d7142791ae55cab11d59b29bc4d
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Mon May 29 21:25:12 2023 -0700

    feat(docs): Add note on modifier functions to macros

commit b276a3bfb074a869ca101bdaba924c936eeb04ec
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Tue Dec 6 00:13:01 2022 -0600

    refactor(kscan): batch GPIO reads by port

    Changed the GPIO matrix and direct GPIO key scan drivers to do a single
    read per port instead of one read per pin. This is much more efficient
    for some types of GPIO drivers, such as I2C GPIO expanders.

    To accomplish this with minimal overhead, we now sort input pins by port
    at driver init. if we iterate through the pins in the sorted order, all
    pins on the same port are consecutive, so we only need to read each port
    once the first time we see it.

commit 1adfcf92bf96cd6453e6bb3ae8cc3b2d1fa8caa4
Author: Xudong Zheng <7pkvm5aw@slicealias.com>
Date:   Mon May 29 00:28:45 2023 -0400

    refactor(split): fix inconsistency in Kconfig names

commit 5aac2743b10c69be000038cd03e51f5a284fa6cc
Author: Peter Johanson <peter@peterjohanson.com>
Date:   Fri May 5 22:56:58 2023 -0700

    fix(bluetooth): Improved checking for conn status.

    * Check the actual connection status before considering
      a discovered connection as connected.

commit 864394b40a7599a1560782226168cd6e40244c5a
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun May 14 12:20:24 2023 -0700

    feat(display): Add setting to invert display colors

    Add CONFIG_ZMK_DISPLAY_INVERT Kconfig to invert colors
    (black-on-white to white-on-black) on monochrome screens.
    Currently applies only if CONFIG_LV_USE_THEME_MONO is selected,
    which is the default unless user overrides it.

commit 7e29166c6ce4987de58de2e8a5545dca68312dfd
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun May 14 12:40:11 2023 -0700

    refactor(display): Clean up unused theme Kconfig

commit b021d19255122883c4ccd1887ffa0bba5df076b0
Author: Cem Aksoylar <caksoylar@users.noreply.github.com>
Date:   Sun May 14 12:12:59 2023 -0700

    fix(display): Imply LVGL mono theme when display is enabled

    All displays currently used with ZMK are monochrome so it makes sense
    to enable the mono theme by default, which can be disabled by the user
    since we use the "imply" statement.

    Without this theme setting, the small font size selection for widgets
    at the bottom of the stock status screen does not work.

commit c4c014e3d1087a41d5347b2af9d46ab939cc6c82
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Mon Apr 24 20:22:42 2023 -0500

    fix(docs): Fix typescript error

    See https://github.com/facebook/docusaurus/issues/8226#issuecomment-1420620198

commit dae020787e5b29290e5cbd564fb5cdc4d29a0324
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Apr 23 16:55:01 2023 -0500

    docs: Update tree-sitter

    Updated web-tree-sitter and the devicetree grammar.

    web-tree-sitter now supports a custom function to locate its .wasm file,
    so performing a string replace is no longer necessary to get it to work
    with Docusaurus' Webpack configuration. We now check when tree-sitter is
    locating its .wasm file and provide the Webpack-adjusted URL.

commit c6bf95a901164e57d87d76cc65962434bba7b25d
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Apr 23 00:41:08 2023 -0500

    chore: Update fontawesome

commit da2599aa75875a67ea923b93d58b6591e0747a06
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Apr 23 00:26:28 2023 -0500

    chore: Update docusaurus, react types

commit 4674215551b8c9bb0706e825742ba82b9d46ed3b
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Apr 23 00:14:00 2023 -0500

    chore: Update json-schema-to-typescript

commit d799560985b40a7f9526cfdedd88546b60cf3182
Author: Joel Spadin <joelspadin@gmail.com>
Date:   Sun Apr 23 00:10:58 2023 -0500

    chore: Update typescript, eslint, webpack

commit 89d71ed2c2c1af78c166a96dc65658e4f39743ab
Author: digger vermont <digver@users.noreply.github.com>
Date:   Thu May 18 19:47:36 2023 -0400

    feat(boards): Add KBDfans Tofu65 2.0 board

    * Initial commit of Tofu65 2.0 board

    ---------

    Co-authored-by: Pete Johanson <peter@peterjohanson.com>

commit b1ca9199de02dcb45d055a71807ff3894290fda7
Author: Albert Y <76888457+filterpaper@users.noreply.github.com>
Date:   Wed May 17 12:42:57 2023 +0800

    fix(ci): Refactor prepare variable step

    * Refactor workflow variables
    * Use quotes to avoid word splitting

commit a1e0607a22deb72ce4ac64e442f0baa…
@caksoylar caksoylar mentioned this issue Jan 14, 2024
Merged
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@rich-westarete